MannTek CBC-C Cable-Release Cryogenic Breakaway Coupling for LNG — DN 50 to DN 150

MannTek CBC-C cryogenic breakaway coupling released by cable rather than breaking bolts, for LNG and liquid-gas lines with high operating pressure and a weak piping structure. Both valves close on release. DN 50 to DN 150, -196 °C. From Indus Hydraulics, authorised MannTek distributor, UAE.
Key features
- Coupling Family: Cryogenic Breakaway Coupling
- Coupling Type / Variant: Cable-release type (CBC-C)
- End A Configuration: Thread, flange or hose shank (chosen per side)
- End B Configuration: Thread, flange or hose shank (chosen per side)
- Size Range: DN 50 to DN 150
- Working Pressure: 25 bar (MannTek)
- Coupling Family
- Cryogenic Breakaway Coupling
- Coupling Type / Variant
- Cable-release type (CBC-C)
- End A Configuration
- Thread, flange or hose shank (chosen per side)
- End B Configuration
- Thread, flange or hose shank (chosen per side)
- Size Range
- DN 50 to DN 150
- Working Pressure
- 25 bar (MannTek)
Product description
The CBC-C is MannTek's cable-release cryogenic breakaway coupling. Like the breaking-bolt CBC it protects LNG and liquid-gas hose assemblies against excessive load, but instead of breaking bolts it has a clamp system and an external collar with an attached cable. When the cable pulls, the clamp releases. MannTek recommends it for transfer systems that combine a high operating pressure with a weak piping structure, where the pull needed to break bolts would load the pipework more than it can take.
How it works
The coupling consists of two halves, each with its own valve. In service the halves are clamped together and the valves held open. After an emergency disconnection the coupling separates and both valves close immediately, so the line is shut off on both sides of the break.
Sizes and construction
- Sizes listed: DN 50, DN 63, DN 80, DN 100 and DN 150. MannTek's product page gives 2" to 8" for the cable release type, so ask if you need a size not listed.
- Body: stainless steel; seals: PTFE
- Working pressure: 25 bar (MannTek); service temperature down to -196 °C
- Inlet and outlet connections chosen individually: thread, flange or hose shank
Choosing between CBC, CBC-C and PERC
Choose the breaking-bolt CBC where the line and its supports can carry the release force; the CBC-C where they cannot, or where the release should be triggered by cable from a fixed point; and the PERC where the release must also be triggered remotely by the emergency shutdown system. Send us the line pressure, size and layout and we will propose the type.
Indus Hydraulics is an authorised MannTek distributor in the UAE and supplies MannTek couplings direct from MannTek in Sweden.
How to order
Send the size, the inlet and outlet connections, the medium and line pressure, and describe where the release cable will be anchored. We confirm the MannTek order code, price and lead time with the quotation.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Cryogenic Breakaway Coupling |
| Coupling Type / Variant | Cable-release type (CBC-C) |
| Notes | For LNG and cryogenic liquefied gases down to -196 °C. Connections and order code confirmed with the quotation. |
| Manufacturer | MannTek (Mann Teknik AB), Mariestad, Sweden |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | Thread, flange or hose shank (chosen per side) |
| End B Configuration | Thread, flange or hose shank (chosen per side) |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | DN 50 to DN 150 |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Stainless steel |
| Seal / Gasket | PTFE |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | 25 bar (MannTek) |
| Release | Pulled release cable opens the clamp; both valves close on separation |
| Service temperature | Down to -196 °C |
Shipping & lead time
Sizes & part numbers
5 sizes- Indus part no.IH-MNT-CBCC-050
- Description
- Cable-release type. Body: stainless steel
- Nominal size
- DN 50
- Working pressure (bar)
- 25
- Indus part no.IH-MNT-CBCC-063
- Description
- Cable-release type. Body: stainless steel
- Nominal size
- DN 63
- Working pressure (bar)
- 25
- Indus part no.IH-MNT-CBCC-080
- Description
- Cable-release type. Body: stainless steel
- Nominal size
- DN 80
- Working pressure (bar)
- 25
- Indus part no.IH-MNT-CBCC-100
- Description
- Cable-release type. Body: stainless steel
- Nominal size
- DN 100
- Working pressure (bar)
- 25
- Indus part no.IH-MNT-CBCC-150
- Description
- Cable-release type. Body: stainless steel
- Nominal size
- DN 150
- Working pressure (bar)
- 25
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is the MannTek CBC-C cable-release cryogenic breakaway coupling used for?▾
How do I read the MannTek CBC-C part numbers?▾
Which sizes does the MannTek CBC-C come in?▾
What pressure and temperature is the MannTek CBC-C rated for?▾
How does the MannTek CBC-C release?▾
When should I choose the CBC-C rather than the breaking-bolt CBC or the PERC?▾
What connections does the MannTek CBC-C take?▾
Is the CBC-C suitable for liquid nitrogen as well as LNG?▾
What do I need to tell Indus to quote the MannTek CBC-C breakaway couplings?▾
How does the CBC-C compare with the breaking-bolt CBC?▾
Does Indus buy the CBC-C direct from the maker?▾
Are MannTek CBC-C breakaway couplings in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Safety & HSE
How to choose a safety breakaway coupling: breaking bolt, cable release, industrial or marine
A safety breakaway coupling is the planned weak link in a hose line: when a truck drives off or a vessel moves, it separates and both halves close before the hose or arm is torn off. The three types, how to tell industrial from marine, how the breaking load is set, and where powered release takes over.
3 min read
Industrial hose
LNG bunkering couplings: ISO 21593 vs ISO/TS 18683, breakaways and emergency release
An LNG bunkering line is a chain: the dry cryogenic coupling, a breakaway or powered emergency release coupling, the transfer hose and the gear that holds and protects it. How the two coupling standards differ, how emergency release is staged as vessels move apart, and what goes around the hose string.
3 min read




