Reference library
Thread dimensions for 20 connection types, 242 crimp settings, 118 published pressure ratings and 80 defined terms. Every figure is an HTML table you can search, copy and cite — no PDFs, no sign-in, and each page says where its numbers come from.
References
Built from the published standards and the maker’s own figures, and cross-checked against each other. Where the sources disagreed, the page says which one won.
SAE J514 · J1453 · J518 · ISO 228 · ISO 8434
Male and female thread diameters, pitch and seat for every common port and connector — measured in inches and millimetres, family by family.
Maker’s published settings
Finished crimp diameter and die position for each hose and fitting series we supply, with a finder that narrows it to one row.
4:1 on minimum burst · carbon steel
Maximum working pressure by connection type and size, in psi and bar, and a calculator that rates a joint by its weaker end.
Written for this site
The words on a datasheet and at the counter — dash size, drop length, skiving, Code 62 — defined plainly, with what each is confused with.
Calculators
Three smaller tools that answer one question each.
Chart
Dash number to inches and millimetres, with the two caveats that cause most ordering mistakes.
Read with the charts
Still not sure
A photograph and two measurements are usually enough for us to name the fitting, the hose or the crimp setting, and quote the replacement the same day.
Or call +971 52 2477942
What to send
