Tube Thimble without Gusset TTG7 Painted/Galvanized
Tube Thimble without Gusset TTG7 Painted/Galvanized, in 12 sizes, 10 mm to 48 mm. Indus part numbers.
Key features
- Product type: Tube Thimble without Gusset TTG7 Painted/Galvanized
- Size range: 10 mm to 48 mm
- Size range
- 10 mm to 48 mm
- Material
- Carbon steel
- Finish
- Zinc plated, hot-dip galvanized, powder coated
Product description
A thimble lines a wire rope eye so it keeps its shape and does not kink or wear where it bears. Carbon steel, zinc plated, hot-dip galvanized, powder coated.
Sizes
12 sizes, 10 mm to 48 mm. Every size has its own Indus part number in the table below.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Machining, stamping.
Choosing a size
Match the thimble to the rope diameter. Use an extra-heavy thimble where the eye bears hard on a pin or hook.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Tube Thimble without Gusset TTG7 Painted/Galvanized |
| Sizes | 12 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 10 mm to 48 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel |
| Finish | Zinc plated, hot-dip galvanized, powder coated |
Shipping & lead time
Sizes & part numbers
12 sizes| Indus part no. | Size | Rope size | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| IH-LR-TH-TTWGTTG7P-10MM | 10 mm | 10 | 12 | 84 | 23 | 4 | 8 | 0.21 |
| IH-LR-TH-TTWGTTG7P-12MM | 12 mm | 12 | 15 | 95 | 27 | 5 | 10 | 0.4 |
| IH-LR-TH-TTWGTTG7P-14MM | 14 mm | 14 | 17 | 100 | 27 | 5 | 10 | 0.48 |
| IH-LR-TH-TTWGTTG7P-16MM | 16 mm | 16 | 19 | 112 | 32 | 5 | 12 | 0.6 |
| IH-LR-TH-TTWGTTG7P-18MM | 18 mm | 18 | 22 | 125 | 35 | 5 | 15 | 0.71 |
| IH-LR-TH-TTWGTTG7P-22MM | 22 mm | 22 | 25 | 150 | 45 | 6.3 | 16 | 1.21 |
| IH-LR-TH-TTWGTTG7P-24MM | 24 mm | 24 | 28 | 157 | 45 | 7 | 16 | 1.6 |
| IH-LR-TH-TTWGTTG7P-26MM | 26 mm | 26 | 30 | 170 | 47 | 7 | 18 | 1.91 |
| IH-LR-TH-TTWGTTG7P-32MM | 32 mm | 32 | 35 | 190 | 60 | 7 | 22 | 2.6 |
| IH-LR-TH-TTWGTTG7P-38MM | 38 mm | 38 | 45 | 228 | 70 | 7 | 27 | 3.5 |
| IH-LR-TH-TTWGTTG7P-42MM | 42 mm | 42 | 50 | 255 | 75 | 7 | 35 | 4.2 |
| IH-LR-TH-TTWGTTG7P-48MM | 48 mm | 48 | 55 | 268 | 80 | 7.5 | 31 | 4.8 |
Size — Nominal size as the manufacturer states it. Rope size — Rope diameter the sheave is made for. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the tube thimble without gusset TTG7 painted/galvanized come in?▾
When do I need an extra heavy thimble?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Standard Wire Rope Thimble — G-411 Pattern
Wire Rope Thimble — AS 1138
Wire Rope Thimble — European Commercial Type
Wire Rope Thimble — JIS
BS 464 Wire Rope Thimble, Hot-Dip Galvanized
DIN 6899 A Wire Rope Thimble
DIN 6899 B Wire Rope Thimble
