Wire Rope Thimble — European Commercial Type
Wire Rope Thimble, in 20 sizes, 15 mm to 140 mm. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Wire Rope Thimble
- Size range: 15 mm to 140 mm
- Size range
- 15 mm to 140 mm
- Material
- Mild steel
- Finish
- Electro-galvanized / hot dip glavanized
Product description
Wire Rope Thimble for tension, lashing and fixing duty. Mild steel, electro-galvanized / hot dip glavanized.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes
20 sizes, 15 mm to 140 mm. Every size has its own Indus part number in the table below.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Stamping.
Choosing a size
Match the thimble to the rope diameter. Use an extra-heavy thimble where the eye bears hard on a pin or hook.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Wire Rope Thimble |
| Sizes | 20 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 15 mm to 140 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Mild steel |
| Finish | Electro-galvanized / hot dip glavanized |
Shipping & lead time
Sizes & part numbers
20 sizes| Indus part no. | Size | a (mm) | b (mm) | d (mm) | c (mm) | e (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| IH-LR-TH-WRTEC-15MM | 15 mm | 3 | 24 | 15 | 18 | 10 | 0.4 |
| IH-LR-TH-WRTEC-16MM | 16 mm | 4 | 25 | 16 | 19 | 11 | 0.5 |
| IH-LR-TH-WRTEC-22MM | 22 mm | 5 | 31 | 22 | 22 | 16 | 0.6 |
| IH-LR-TH-WRTEC-26MM | 26 mm | 6 | 37 | 26 | 29 | 19 | 1.5 |
| IH-LR-TH-WRTEC-32MM | 32 mm | 7 | 44 | 32 | 32 | 22 | 2 |
| IH-LR-TH-WRTEC-34MM | 34 mm | 8 | 51 | 34 | 38 | 24 | 2.6 |
| IH-LR-TH-WRTEC-38MM | 38 mm | 9 | 57 | 38 | 42 | 29 | 6.5 |
| IH-LR-TH-WRTEC-42MM | 42 mm | 10 | 64 | 42 | 44 | 32 | 4.8 |
| IH-LR-TH-WRTEC-48MM | 48 mm | 11 | 70 | 48 | 51 | 35 | 7.5 |
| IH-LR-TH-WRTEC-51MM | 51 mm | 12 | 76 | 51 | 57 | 38 | 8.5 |
| IH-LR-TH-WRTEC-57MM | 57 mm | 14 | 82 | 57 | 60 | 40 | 10 |
| IH-LR-TH-WRTEC-60MM | 60 mm | 16 | 89 | 60 | 64 | 42 | 12.6 |
| IH-LR-TH-WRTEC-67MM | 67 mm | 18 | 102 | 67 | 69 | 45 | 22 |
| IH-LR-TH-WRTEC-76MM | 76 mm | 20 | 115 | 76 | 79 | 51 | 26.8 |
| IH-LR-TH-WRTEC-83MM | 83 mm | 22 | 127 | 83 | 89 | 54 | 33 |
| IH-LR-TH-WRTEC-88MM | 88 mm | 24 | 140 | 88 | 102 | 64 | 39.5 |
| IH-LR-TH-WRTEC-102MM | 102 mm | 26 | 152 | 102 | 105 | 68 | 66 |
| IH-LR-TH-WRTEC-110MM | 110 mm | 28 | 165 | 110 | 115 | 73 | 77 |
| IH-LR-TH-WRTEC-115MM | 115 mm | 30 | 178 | 115 | 121 | 79 | 99 |
| IH-LR-TH-WRTEC-140MM | 140 mm | 32 | 203 | 140 | 133 | 93 | 119 |
Size — Nominal size as the manufacturer states it. a — Dimension a on the manufacturer dimension drawing. b — Dimension b on the manufacturer dimension drawing. d — Dimension d on the manufacturer dimension drawing. c — Dimension c on the manufacturer dimension drawing. e — Dimension e on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the wire rope thimble come in?▾
Can it be used for lifting?▾
When do I need an extra heavy thimble?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Wire Rope Thimble — JIS
BS 464 Wire Rope Thimble, Hot-Dip Galvanized
DIN 6899 A Wire Rope Thimble
DIN 6899 B Wire Rope Thimble
Extra Heavy Wire Rope Thimble — G-414 Pattern, Hot-Dip Galvanized
Fibre Rope Thimble — K3
Heavy Duty Stub-End Thimble — K2
