Sun Hydraulics Pilot-to-Open Check Valve with Sealed Pilot — CKBD, CKCD, CKED, CKGD, CKID, Series 0 to 4

Sun Hydraulics Pilot-to-Open Check Valve with Sealed Pilot: CKBD, CKCD, CKED, CKGD, CKID, series 0 to 4, 7.5 gpm to 120 gpm (30 L/min to 480 L/min), T-163A, T-11A, T-2A, T-17A, T-19A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Pilot-to-Open Check Valve
- Capacity: 7.5 gpm to 120 gpm (30 L/min to 480 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-163A, T-11A, T-2A, T-17A, T-19A
- Valve function
- Pilot-to-Open Check Valve
- Series (frame sizes)
- 0 to 4
- Cavity
- T-163A, T-11A, T-2A, T-17A, T-19A
Product description
A pilot-to-open check lets oil flow freely from the valve side (port 2) into the actuator (port 1) and locks it there. Pressure at the pilot port (port 3) lifts the poppet so the actuator can return. The pilot pressure needed rises with the load pressure, and pressure at port 2 works against the pilot.
This version
- Sealed pilot, for circuits where leakage from the pilot to the work ports is not acceptable.
Sizes and cavities
Sun Hydraulics builds this valve in 5 versions:
- CKBD — series 0, T-163A cavity, 7.5 gpm (30 L/min)
- CKCD — series 1, T-11A cavity, 15 gpm (60 L/min)
- CKED — series 2, T-2A cavity, 30 gpm (120 L/min)
- CKGD — series 3, T-17A cavity, 60 gpm (240 L/min)
- CKID — series 4, T-19A cavity, 120 gpm (480 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Pilot ratio: 3:1
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 1 drops/min. (0,07 cc/min)
Configuration options
The letters after the base model code choose these options (shown for CKCD; a size may add or drop a choice):
- Control: C — Tamper Resistant - Factory Set, L — Manual Load Release, X — Standard Pilot, B — External 1/4 BSPP Pilot Port, Port 3 blocked, E — External 4-SAE Pilot Port, Port 3 Blocked, P — External 1/4 NPTF Pilot Port, Port 3 Blocked
- Check cracking pressure: A — 4 psi (0,3 bar), B — 15 psi (1 bar), C — 30 psi (2 bar), D — 50 psi (3,5 bar), E — 75 psi (5 bar), F — 100 psi (7 bar), G — 150 psi (10,5 bar), Z — 1 psi (0,07 bar)
- Seal material: L — Extended Temp. Buna, N — Buna-N, V — Viton, E — EPDM
- Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel
Option rules: EPDM seals are not allowed on modifier /AP or /LH; If the modifier is /AP, the control must be X; If the modifier is /LH, the control must be L or X; If the seal is E, the control must be B,E,L,P or X.
Selection notes
- Steel seat, heat-treated poppet: if a load drifts through it, the seat has usually been damaged and the cartridge should be replaced.
- Fits the same cavity, with the same flow path, as a 3-port counterbalance valve of the same frame size; the height above the manifold may differ.
Where it is used
Locking cylinders on outriggers, clamps, tipping bodies and presses; hose-burst protection.
Installation and seal kits
Hex 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 0: Buna: 990163007, EPDM: 990163014, Polyurethane: 990163002, Viton: 990163006; series 1: Buna: 990011007, EPDM: 990011014, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, EPDM: 990017014, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CKCDXCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 0: Buna: 990163007, EPDM: 990163014, Polyurethane: 990163002, Viton: 990163006; series 1: Buna: 990011007, EPDM: 990011014, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, EPDM: 990017014, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006 |
| Weight | .20 lb (0,10 kg) to 2.80 lb (1,30 kg) |
Identification
| Parameter | Value |
|---|---|
| Valve function | Pilot-to-Open Check Valve |
| Series (frame sizes) | 0 to 4 |
| Cavity | T-163A, T-11A, T-2A, T-17A, T-19A |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | C — Tamper Resistant - Factory Set, L — Manual Load Release, X — Standard Pilot, B — External 1/4 BSPP Pilot Port, Port 3 blocked, E — External 4-SAE Pilot Port, Port 3 Blocked, P — External 1/4 NPTF Pilot Port, Port 3 Blocked |
| Seal material | L — Extended Temp. Buna, N — Buna-N, V — Viton, E — EPDM |
| Material / coating | /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel |
Performance
| Parameter | Value |
|---|---|
| Capacity | 7.5 gpm to 120 gpm (30 L/min to 480 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Pilot ratio | 3:1 |
| Setting range | A — 4 psi (0,3 bar), B — 15 psi (1 bar), C — 30 psi (2 bar), D — 50 psi (3,5 bar), E — 75 psi (5 bar), F — 100 psi (7 bar), G — 150 psi (10,5 bar), Z — 1 psi (0,07 bar) |
| Max leakage | 1 drops/min. (0,07 cc/min) |
Shipping & lead time
Sizes & part numbers
5 sizes- Sun Hydraulics part no.CKBD
- Series
- 0
- Cavity
- T-163A
- Capacity
- 7.5 gpm / 30 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.CKCD
- Series
- 1
- Cavity
- T-11A
- Capacity
- 15 gpm / 60 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.CKED
- Series
- 2
- Cavity
- T-2A
- Capacity
- 30 gpm / 120 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.CKGD
- Series
- 3
- Cavity
- T-17A
- Capacity
- 60 gpm / 240 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.CKID
- Series
- 4
- Cavity
- T-19A
- Capacity
- 120 gpm / 480 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics CKBD, CKCD, CKED, CKGD, CKID pilot-to-open check valve used for?▾
Which sizes and versions does the Sun Hydraulics CKBD, CKCD, CKED, CKGD, CKID pilot-to-open check valve come in?▾
How do I read the Sun Hydraulics model code CKCDXCN for the CKBD, CKCD, CKED, CKGD, CKID pilot-to-open check valve?▾
What is the maximum operating pressure of the Sun Hydraulics CKBD, CKCD, CKED, CKGD, CKID pilot-to-open check valve?▾
What flow capacity does the Sun Hydraulics CKBD, CKCD, CKED, CKGD, CKID pilot-to-open check valve have by series?▾
Which seal materials and body finishes does the Sun Hydraulics CKBD, CKCD, CKED, CKGD, CKID pilot-to-open check valve come with?▾
Which cavity does the Sun Hydraulics CKBD, CKCD, CKED, CKGD, CKID pilot-to-open check valve fit?▾
Which seal kit fits the Sun Hydraulics CKBD, CKCD, CKED, CKGD, CKID pilot-to-open check valve?▾
How is the Sun Hydraulics CKBD, CKCD, CKED, CKGD, CKID pilot-to-open check valve installed?▾
Where is the Sun Hydraulics CKBD, CKCD, CKED, CKGD, CKID pilot-to-open check valve used?▾
Sun Hydraulics CKBD, CKCD, CKED, CKGD, CKID or CKBB, CKCB, CKEB, CKGB, CKIB: what is the difference?▾
Do you stock the Sun Hydraulics CKBD, CKCD, CKED, CKGD, CKID in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








