Skip to content
SUN HYDRAULICSIH-SUN-CNCE-CNGE

Sun Hydraulics Pilot-to-Open Check Valve with Bypass Orifice — CNCE, CNEE, CNGE, Series 1 to 3

Check, Shuttle & Directional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics CNCE pilot-to-open check valve, series 1, T-11A cavity — dimension drawing
VIEW 01·Sun Hydraulics CNCE pilot-to-open check valve, series 1, T-11A cavity — dimension drawing
1 / 3

Sun Hydraulics Pilot-to-Open Check Valve with Bypass Orifice: CNCE, CNEE, CNGE, series 1 to 3, 15 gpm to 60 gpm (60 L/min to 240 L/min), T-11A, T-2A, T-17A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Pilot-to-Open Check Valve
  • Capacity: 15 gpm to 60 gpm (60 L/min to 240 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-11A, T-2A, T-17A
Valve function
Pilot-to-Open Check Valve
Series (frame sizes)
1 to 3
Cavity
T-11A, T-2A, T-17A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A pilot-to-open check lets oil flow freely from the valve side (port 2) into the actuator (port 1) and locks it there. Pressure at the pilot port (port 3) lifts the poppet so the actuator can return. The pilot pressure needed rises with the load pressure, and pressure at port 2 works against the pilot.

This version

  • A bypass orifice, sized to order, lets a controlled flow pass in the checked direction; its diameter is stamped on a hex face.

Sizes and cavities

Sun Hydraulics builds this valve in 3 versions:

  • CNCE — series 1, T-11A cavity, 15 gpm (60 L/min)
  • CNEE — series 2, T-2A cavity, 30 gpm (120 L/min)
  • CNGE — series 3, T-17A cavity, 60 gpm (240 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Pilot ratio: 3:1
  • Maximum operating pressure: 5000 psi (350 bar)
  • Bypass orifice range: .016 - .153 in. (0,4 - 3,9 mm), .016 - .135 in. (0,4 - 3,4 mm), .016 - .218 in. (0,4 - 5,5 mm)

Configuration options

The letters after the base model code choose these options (shown for CNCE; a size may add or drop a choice):

  • Control: X — Not Adjustable
  • Setting range: A — 4 psi (0,3 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), B — 15 psi (1 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), C — 30 psi (2 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), D — 50 psi (3,5 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), E — 75 psi (5 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), F — 100 psi (7 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), Z — 1 psi (0,07 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm)
  • Seal material: N — Buna-N, V — Viton

Selection notes

  • Steel seat, heat-treated poppet: if a load drifts through it, the seat has usually been damaged and the cartridge should be replaced.
  • Fits the same cavity, with the same flow path, as a 3-port counterbalance valve of the same frame size; the height above the manifold may differ.

Where it is used

Locking cylinders on outriggers, clamps, tipping bodies and presses; hose-burst protection.

Installation and seal kits

Hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm). Replacement seal kits — series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CNCEXCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm)
Seal kitsseries 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006
Weight.20 lb (0,10 kg) to 1.10 lb (0,50 kg)

Identification

ParameterValue
Valve functionPilot-to-Open Check Valve
Series (frame sizes)1 to 3
CavityT-11A, T-2A, T-17A

Performance

ParameterValue
Capacity15 gpm to 60 gpm (60 L/min to 240 L/min)
Max operating pressure5000 psi (350 bar)
Pilot ratio3:1
Setting rangeA — 4 psi (0,3 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), B — 15 psi (1 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), C — 30 psi (2 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), D — 50 psi (3,5 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), E — 75 psi (5 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), F — 100 psi (7 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), Z — 1 psi (0,07 bar) Cracking Pressure, .016 - .153 in.

Configuration

ParameterValue
Control / adjustmentX — Not Adjustable
Seal materialN — Buna-N, V — Viton

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at