Sun Hydraulics Free Flow Nose to Side Check Valve with Bypass Orifice — CNBC to CNTC, Series 0, 1, 2, 3, 4, 0C

Sun Hydraulics Free Flow Nose to Side Check Valve with Bypass Orifice: CNBC to CNTC, series 0, 1, 2, 3, 4, 0C, 7.5 gpm to 180 gpm (30 L/min to 680 L/min), T-162A, SC-08-02, T-13A, T-5A, T-16A, T-18A and more cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Free-Flow Nose-to-Side Check Valve
- Capacity: 7.5 gpm to 180 gpm (30 L/min to 680 L/min)
- Max operating pressure: 5000 psi (350 bar), 3600 psi (250 bar)
- Cavity: T-162A, SC-08-02, T-13A, T-5A, T-16A, T-18A, T-18AU
- Valve function
- Free-Flow Nose-to-Side Check Valve
- Series (frame sizes)
- 0, 1, 2, 3, 4, 0C
- Cavity
- T-162A, SC-08-02, T-13A, T-5A, T-16A, T-18A, T-18AU
Product description
A screw-in check cartridge that lets oil flow freely from the nose (port 1) out of the side (port 2) and seals against flow the other way. A hardened, lapped poppet gives near-zero leakage, and both ports are rated for 5,000 psi (350 bar).
This version
- A bypass orifice, sized to order, lets a controlled flow pass in the checked direction; its diameter is stamped on a hex face.
Sizes and cavities
Sun Hydraulics builds this valve in 7 versions:
- CNBC — series 0, T-162A cavity, 7.5 gpm (30 L/min)
- CNTC — series 0C, SC-08-02 cavity, 8 gpm (30 L/min), Common cavity
- CNDC — series 1, T-13A cavity, 15 gpm (60 L/min)
- CNFC — series 2, T-5A cavity, 30 gpm (120 L/min)
- CNHC — series 3, T-16A cavity, 60 gpm (240 L/min)
- CNJC — series 4, T-18A cavity, 120 gpm (480 L/min)
- CNKC — series 4, T-18AU cavity, 180 gpm (680 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series. Series 0C and 1C parts fit industry-standard common cavities (SC-08, SC-10) instead of Sun's T-series cavities.
Ratings
- Maximum operating pressure: 5000 psi (350 bar), 3600 psi (250 bar)
- Bypass orifice range: .016 - .062 in. (0,4 - 1,6 mm), .016 - .107 in. (0,4 - 2,7 mm), .016 - .127 in. (0,4 - 3,2 mm), .016 - .252 in. (0,4 - 6,4 mm), .016 - .354 in. (0,4 - 9 mm)
- Maximum leakage: 5 drops/min. (0,3 cc/min)
Configuration options
The letters after the base model code choose these options (shown for CNDC; a size may add or drop a choice):
- Control: L — Manual Load Release, X — Not Adjustable
- Setting range: A — 4 psi (0,3 bar) Cracking Pressure, .016 - .107 in. (0,4 - 2,7 mm), B — 15 psi (1 bar) Cracking Pressure, .016 - .107 in. (0,4 - 2,7 mm), C — 30 psi (2 bar) Cracking Pressure, .016 - .107 in. (0,4 - 2,7 mm), D — 50 psi (3,5 bar) Cracking Pressure, .016 - .107 in. (0,4 - 2,7 mm), E — 75 psi (5 bar) Cracking Pressure, .016 - .107 in. (0,4 - 2,7 mm), F — 100 psi (7 bar) Cracking Pressure, .016 - .107 in. (0,4 - 2,7 mm), Z — 1 psi (0,07 bar) Cracking Pressure, .016 - .107 in. (0,4 - 2,7 mm)
- Seal material: N — Buna-N, V — Viton
- Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel
Option rules: If the modifier is /AP, the control must be X; If the modifier is /LH, the control must be L or X.
Selection notes
- Floating construction keeps the poppet free even if the cartridge is over-torqued or the cavity is slightly out.
- EPDM seals are for phosphate-ester fluids only; petroleum oils and greases attack them.
Where it is used
Pump outlet checks, load-holding checks in a manifold, isolating one branch of a circuit from another.
Installation and seal kits
Hex 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm), 19 - 22 lbf ft (26 - 30 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 0: Buna: 990162007, EPDM: 990162014, Polyurethane: 990162002, Viton: 990162006; series 1: Buna: 990010007, Polyurethane: 990010002, Viton: 990010006; series 2: Buna: 990203007, Viton: 990203006; series 3: Buna: 990016007, EPDM: 990016014, Polyurethane: 990016002, Viton: 990016006; series 4: Buna: 990018007, Polyurethane: 990018002, Viton: 990018006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CNDCXCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Free-Flow Nose-to-Side Check Valve |
| Series (frame sizes) | 0, 1, 2, 3, 4, 0C |
| Cavity | T-162A, SC-08-02, T-13A, T-5A, T-16A, T-18A, T-18AU |
Performance
| Parameter | Value |
|---|---|
| Capacity | 7.5 gpm to 180 gpm (30 L/min to 680 L/min) |
| Max operating pressure | 5000 psi (350 bar), 3600 psi (250 bar) |
| Setting range | A — 4 psi (0,3 bar) Cracking Pressure, .016 - .107 in. (0,4 - 2,7 mm), B — 15 psi (1 bar) Cracking Pressure, .016 - .107 in. (0,4 - 2,7 mm), C — 30 psi (2 bar) Cracking Pressure, .016 - .107 in. (0,4 - 2,7 mm), D — 50 psi (3,5 bar) Cracking Pressure, .016 - .107 in. (0,4 - 2,7 mm), E — 75 psi (5 bar) Cracking Pressure, .016 - .107 in. (0,4 - 2,7 mm), F — 100 psi (7 bar) Cracking Pressure, .016 - .107 in. (0,4 - 2,7 mm), Z — 1 psi (0,07 bar) Cracking Pressure, .016 - .107 in. |
| Max leakage | 5 drops/min. (0,3 cc/min) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | L — Manual Load Release, X — Not Adjustable |
| Seal material | N — Buna-N, V — Viton |
| Material / coating | /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 20 - 25 lbf ft (27 - 33 Nm), 19 - 22 lbf ft (26 - 30 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 0: Buna: 990162007, EPDM: 990162014, Polyurethane: 990162002, Viton: 990162006; series 1: Buna: 990010007, Polyurethane: 990010002, Viton: 990010006; series 2: Buna: 990203007, Viton: 990203006; series 3: Buna: 990016007, EPDM: 990016014, Polyurethane: 990016002, Viton: 990016006; series 4: Buna: 990018007, Polyurethane: 990018002, Viton: 990018006 |
| Weight | .20 lb (0,10 kg) to 2.10 lb (0,95 kg) |
Shipping & lead time
Sizes & part numbers
7 sizes- Sun Hydraulics part no.CNBC
- Description
- Standard
- Series
- 0
- Cavity
- T-162A
- Capacity
- 7.5 gpm / 30 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.CNTC
- Description
- Common cavity
- Series
- 0C
- Cavity
- SC-08-02
- Capacity
- 8 gpm / 30 L/min
- Max pressure
- 3600 psi / 250 bar
- Sun Hydraulics part no.CNDC
- Description
- Standard
- Series
- 1
- Cavity
- T-13A
- Capacity
- 15 gpm / 60 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.CNFC
- Description
- Standard
- Series
- 2
- Cavity
- T-5A
- Capacity
- 30 gpm / 120 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.CNHC
- Description
- Standard
- Series
- 3
- Cavity
- T-16A
- Capacity
- 60 gpm / 240 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.CNJC
- Description
- Standard
- Series
- 4
- Cavity
- T-18A
- Capacity
- 120 gpm / 480 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.CNKC
- Description
- Standard
- Series
- 4
- Cavity
- T-18AU
- Capacity
- 180 gpm / 680 L/min
- Max pressure
- 5000 psi / 350 bar
Description — What this part number is, as the manufacturer lists it. Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics CNBC to CNTC free-flow nose-to-side check valve used for?▾
Which sizes and versions does the Sun Hydraulics CNBC to CNTC free-flow nose-to-side check valve come in?▾
How do I read the Sun Hydraulics model code CNDCXCN for the CNBC to CNTC free-flow nose-to-side check valve?▾
What is the maximum operating pressure of the Sun Hydraulics CNBC to CNTC free-flow nose-to-side check valve?▾
What flow capacity does the Sun Hydraulics CNBC to CNTC free-flow nose-to-side check valve have by series?▾
Which seal materials and body finishes does the Sun Hydraulics CNBC to CNTC free-flow nose-to-side check valve come with?▾
Which cavity does the Sun Hydraulics CNBC to CNTC free-flow nose-to-side check valve fit?▾
Which seal kit fits the Sun Hydraulics CNBC to CNTC free-flow nose-to-side check valve?▾
How is the Sun Hydraulics CNBC to CNTC free-flow nose-to-side check valve installed?▾
Where is the Sun Hydraulics CNBC to CNTC free-flow nose-to-side check valve used?▾
Sun Hydraulics CNBC to CNTC or CXDC, CXFC, CXHC, CXJC: what is the difference?▾
Do you stock the Sun Hydraulics CNBC to CNTC in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








