Sun Hydraulics Free Flow Side to Nose Check Valve with Bypass Orifice and Port 3 Blocked — CNCD, CNED, CNGD, CNID, Series 1 to 4

Sun Hydraulics Free Flow Side to Nose Check Valve with Bypass Orifice and Port 3 Blocked: CNCD, CNED, CNGD, CNID, series 1 to 4, 15 gpm to 120 gpm (60 L/min to 480 L/min), T-11A, T-2A, T-17A, T-19A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Free-Flow Side-to-Nose Check Valve
- Capacity: 15 gpm to 120 gpm (60 L/min to 480 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-11A, T-2A, T-17A, T-19A
- Valve function
- Free-Flow Side-to-Nose Check Valve
- Series (frame sizes)
- 1 to 4
- Cavity
- T-11A, T-2A, T-17A, T-19A
Product description
A check cartridge that passes oil freely from the side (port 2) into the nose (port 1) and blocks the reverse. In a 3-port cavity the third port is blanked, so the valve works as a plain 2-port check where a 3-port cavity has been machined.
This version
- A bypass orifice, sized to order, lets a controlled flow pass in the checked direction; its diameter is stamped on a hex face.
- Port 3 is blocked, so it works as a 2-port check in a 3-port cavity.
Sizes and cavities
Sun Hydraulics builds this valve in 4 versions:
- CNCD — series 1, T-11A cavity, 15 gpm (60 L/min)
- CNED — series 2, T-2A cavity, 30 gpm (120 L/min)
- CNGD — series 3, T-17A cavity, 60 gpm (240 L/min)
- CNID — series 4, T-19A cavity, 120 gpm (480 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Bypass orifice range: .016 - .153 in. (0,4 - 3,9 mm), .016 - .135 in. (0,4 - 3,4 mm), .016 - .218 in. (0,4 - 5,5 mm)
Configuration options
The letters after the base model code choose these options (shown for CNCD; a size may add or drop a choice):
- Control: X — Not Adjustable
- Setting range: C — 30 psi (2 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), A — 4 psi (0,3 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), B — 15 psi (1 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), D — 50 psi (3,5 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), E — 75 psi (5 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), F — 100 psi (7 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), Z — 1 psi (0,07 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm)
- Seal material: N — Buna-N, V — Viton
- Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel
Option rules: If the modifier is /AP, the control must be X; If the modifier is /LH, the control must be X.
Selection notes
- With a bypass orifice in a full-time regeneration circuit, rod-end pressure falls to zero once the cylinder stops, so it develops full force at the end of stroke.
- Floating construction keeps the poppet free even if the cartridge is over-torqued.
Where it is used
Regeneration circuits, cylinder ports and any 3-port cavity that only needs a check.
Installation and seal kits
Hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CNCDXCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Free-Flow Side-to-Nose Check Valve |
| Series (frame sizes) | 1 to 4 |
| Cavity | T-11A, T-2A, T-17A, T-19A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 15 gpm to 120 gpm (60 L/min to 480 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | C — 30 psi (2 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), A — 4 psi (0,3 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), B — 15 psi (1 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), D — 50 psi (3,5 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), E — 75 psi (5 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), F — 100 psi (7 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), Z — 1 psi (0,07 bar) Cracking Pressure, .016 - .153 in. |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — Not Adjustable |
| Seal material | N — Buna-N, V — Viton |
| Material / coating | /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006 |
| Weight | .30 lb (0,15 kg) to 1.90 lb (0,85 kg) |
Shipping & lead time
Sizes & part numbers
4 sizes- Sun Hydraulics part no.CNCD
- Series
- 1
- Cavity
- T-11A
- Capacity
- 15 gpm / 60 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.CNED
- Series
- 2
- Cavity
- T-2A
- Capacity
- 30 gpm / 120 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.CNGD
- Series
- 3
- Cavity
- T-17A
- Capacity
- 60 gpm / 240 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.CNID
- Series
- 4
- Cavity
- T-19A
- Capacity
- 120 gpm / 480 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics CNCD, CNED, CNGD, CNID free-flow side-to-nose check valve used for?▾
Which sizes and versions does the Sun Hydraulics CNCD, CNED, CNGD, CNID free-flow side-to-nose check valve come in?▾
How do I read the Sun Hydraulics model code CNCDXCN for the CNCD, CNED, CNGD, CNID free-flow side-to-nose check valve?▾
What is the maximum operating pressure of the Sun Hydraulics CNCD, CNED, CNGD, CNID free-flow side-to-nose check valve?▾
What flow capacity does the Sun Hydraulics CNCD, CNED, CNGD, CNID free-flow side-to-nose check valve have by series?▾
Which seal materials and body finishes does the Sun Hydraulics CNCD, CNED, CNGD, CNID free-flow side-to-nose check valve come with?▾
Which cavity does the Sun Hydraulics CNCD, CNED, CNGD, CNID free-flow side-to-nose check valve fit?▾
Which seal kit fits the Sun Hydraulics CNCD, CNED, CNGD, CNID free-flow side-to-nose check valve?▾
How is the Sun Hydraulics CNCD, CNED, CNGD, CNID free-flow side-to-nose check valve installed?▾
Where is the Sun Hydraulics CNCD, CNED, CNGD, CNID free-flow side-to-nose check valve used?▾
Sun Hydraulics CNCD, CNED, CNGD, CNID or CXCE, CXEE, CXGE, CXIE: what is the difference?▾
Do you stock the Sun Hydraulics CNCD, CNED, CNGD, CNID in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








