Skip to content
SUN HYDRAULICSIH-SUN-CKBG

Sun Hydraulics Flush Mount Pilot-to-Open Check Valve with Sealed Pilot — CKBG

Check, Shuttle & Directional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics CKBG pilot-to-open check valve, series 0, T-163A cavity — dimension drawing
VIEW 01·Sun Hydraulics CKBG pilot-to-open check valve, series 0, T-163A cavity — dimension drawing
1 / 3

Sun Hydraulics Flush Mount Pilot-to-Open Check Valve with Sealed Pilot: CKBG, series 0, 7.5 gpm (30 L/min), T-163A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Pilot-to-Open Check Valve
  • Capacity: 7.5 gpm (30 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-163A
Valve function
Pilot-to-Open Check Valve
Series (frame sizes)
0
Cavity
T-163A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A pilot-to-open check lets oil flow freely from the valve side (port 2) into the actuator (port 1) and locks it there. Pressure at the pilot port (port 3) lifts the poppet so the actuator can return. The pilot pressure needed rises with the load pressure, and pressure at port 2 works against the pilot.

This version

  • Flush-mount body: sits level with the manifold face for a small footprint.
  • Sealed pilot, for circuits where leakage from the pilot to the work ports is not acceptable.

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • CKBG — series 0, T-163A cavity, 7.5 gpm (30 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Pilot ratio: 3:1
  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 1 drops/min. (0,07 cc/min)

Configuration options

The letters after the base model code choose these options (shown for CKBG; a size may add or drop a choice):

  • Control: X — Not Adustable, Standard Hydraulic Pilot
  • Setting range: C — 30 psi (2 bar), E — 75 psi (5 bar)
  • Seal material: N — Buna-N, V — Viton
  • Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Option rules: If the modifier is /AP, the control must be X; If the modifier is /LH, the control must be X.

Selection notes

  • Steel seat, heat-treated poppet: if a load drifts through it, the seat has usually been damaged and the cartridge should be replaced.
  • Fits the same cavity, with the same flow path, as a 3-port counterbalance valve of the same frame size; the height above the manifold may differ.

Where it is used

Locking cylinders on outriggers, clamps, tipping bodies and presses; hose-burst protection.

Installation and seal kits

Replacement seal kits — series 0: Buna: 990163007, Polyurethane: 990163002, Viton: 990163006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CKBGXCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Configuration

ParameterValue
Control / adjustmentX — Not Adustable, Standard Hydraulic Pilot
Seal materialN — Buna-N, V — Viton
Material / coating/AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Performance

ParameterValue
Capacity7.5 gpm (30 L/min)
Max operating pressure5000 psi (350 bar)
Pilot ratio3:1
Setting rangeC — 30 psi (2 bar), E — 75 psi (5 bar)
Max leakage1 drops/min. (0,07 cc/min)

Identification

ParameterValue
Valve functionPilot-to-Open Check Valve
Series (frame sizes)0
CavityT-163A

Installation

ParameterValue
Installation torque20 - 25 lbf ft (27 - 33 Nm)
Seal kitsseries 0: Buna: 990163007, Polyurethane: 990163002, Viton: 990163006
Weight.20 lb (0,10 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at