Skip to content
SUN HYDRAULICSIH-SUN-CK-B

Sun Hydraulics Pilot-to-Open Check Valve with Standard Pilot — CKBB, CKCB, CKEB, CKGB, CKIB, Series 0 to 4

Check, Shuttle & Directional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics CKCB pilot-to-open check valve, series 1, T-11A cavity — dimension drawing
VIEW 01·Sun Hydraulics CKCB pilot-to-open check valve, series 1, T-11A cavity — dimension drawing
1 / 3

Sun Hydraulics Pilot-to-Open Check Valve with Standard Pilot: CKBB, CKCB, CKEB, CKGB, CKIB, series 0 to 4, 7.5 gpm to 120 gpm (30 L/min to 480 L/min), T-163A, T-11A, T-2A, T-17A, T-19A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Pilot-to-Open Check Valve
  • Capacity: 7.5 gpm to 120 gpm (30 L/min to 480 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-163A, T-11A, T-2A, T-17A, T-19A
Valve function
Pilot-to-Open Check Valve
Series (frame sizes)
0 to 4
Cavity
T-163A, T-11A, T-2A, T-17A, T-19A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A pilot-to-open check lets oil flow freely from the valve side (port 2) into the actuator (port 1) and locks it there. Pressure at the pilot port (port 3) lifts the poppet so the actuator can return. The pilot pressure needed rises with the load pressure, and pressure at port 2 works against the pilot.

This version

  • Standard (unsealed) pilot, which lets air trapped in the pilot line purge itself.

Sizes and cavities

Sun Hydraulics builds this valve in 5 versions:

  • CKBB — series 0, T-163A cavity, 7.5 gpm (30 L/min)
  • CKCB — series 1, T-11A cavity, 15 gpm (60 L/min)
  • CKEB — series 2, T-2A cavity, 30 gpm (120 L/min)
  • CKGB — series 3, T-17A cavity, 60 gpm (240 L/min)
  • CKIB — series 4, T-19A cavity, 120 gpm (480 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Pilot ratio: 3:1
  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 1 drops/min. (0,07 cc/min)

Configuration options

The letters after the base model code choose these options (shown for CKCB; a size may add or drop a choice):

  • Control: X — Standard Pilot, L — Manual Load Release, B — External 1/4 BSPP Pilot Port, Port 3 blocked, C — Manual Load Release - Tamper Resistant, D — Manual Load Release, E — External 4-SAE Pilot Port, Port 3 Blocked, G — Slow Acting Pilot, P — External 1/4 NPTF Pilot Port, Port 3 Blocked
  • Check cracking pressure: C — 30 psi (2 bar), A — 4 psi (0,3 bar), B — 15 psi (1 bar), D — 50 psi (3,5 bar), E — 75 psi (5 bar), F — 100 psi (7 bar), G — 150 psi (10,5 bar), Z — 1 psi (0,07 bar)
  • Seal material: N — Buna-N, L — Extended Temp. Buna, V — Viton, E — EPDM
  • Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Option rules: EPDM seals are not allowed on modifier /LH; If the modifier is /AP, the control must be L or X; If the modifier is /LH, the control must be L or X; If the seal is E, the control must be B,C,D,E,G,L,P or X.

Selection notes

  • Steel seat, heat-treated poppet: if a load drifts through it, the seat has usually been damaged and the cartridge should be replaced.
  • Fits the same cavity, with the same flow path, as a 3-port counterbalance valve of the same frame size; the height above the manifold may differ.

Where it is used

Locking cylinders on outriggers, clamps, tipping bodies and presses; hose-burst protection.

Installation and seal kits

Hex 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 0: Buna: 990163007, EPDM: 990163014, Polyurethane: 990163002, Viton: 990163006; series 1: Buna: 990011007, EPDM: 990011014, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, EPDM: 990202014, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, EPDM: 990017014, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, EPDM: 990019014, Polyurethane: 990019002, Viton: 990019006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CKCBXCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Installation

ParameterValue
Valve hex size3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm)
Installation torque20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm)
Seal kitsseries 0: Buna: 990163007, EPDM: 990163014, Polyurethane: 990163002, Viton: 990163006; series 1: Buna: 990011007, EPDM: 990011014, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, EPDM: 990202014, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, EPDM: 990017014, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, EPDM: 990019014, Polyurethane: 990019002, Viton: 990019006
Weight.20 lb (0,10 kg) to 2.80 lb (1,30 kg)

Identification

ParameterValue
Valve functionPilot-to-Open Check Valve
Series (frame sizes)0 to 4
CavityT-163A, T-11A, T-2A, T-17A, T-19A

Configuration

ParameterValue
Control / adjustmentX — Standard Pilot, L — Manual Load Release, B — External 1/4 BSPP Pilot Port, Port 3 blocked, C — Manual Load Release - Tamper Resistant, D — Manual Load Release, E — External 4-SAE Pilot Port, Port 3 Blocked, G — Slow Acting Pilot, P — External 1/4 NPTF Pilot Port, Port 3 Blocked
Seal materialN — Buna-N, L — Extended Temp. Buna, V — Viton, E — EPDM
Material / coating/AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Performance

ParameterValue
Capacity7.5 gpm to 120 gpm (30 L/min to 480 L/min)
Max operating pressure5000 psi (350 bar)
Pilot ratio3:1
Setting rangeC — 30 psi (2 bar), A — 4 psi (0,3 bar), B — 15 psi (1 bar), D — 50 psi (3,5 bar), E — 75 psi (5 bar), F — 100 psi (7 bar), G — 150 psi (10,5 bar), Z — 1 psi (0,07 bar)
Max leakage1 drops/min. (0,07 cc/min)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at