Skip to content
SUN HYDRAULICSIH-SUN-COFO

Sun Hydraulics 120:1 Ratio Pilot-to-Close Check Valve — COFO

Check, Shuttle & Directional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics COFO pilot-to-close check valve, series 2, T-2A cavity — dimension drawing
VIEW 01·Sun Hydraulics COFO pilot-to-close check valve, series 2, T-2A cavity — dimension drawing
1 / 3

Sun Hydraulics 120:1 Ratio Pilot-to-Close Check Valve: COFO, series 2, 1 gpm (.05 inch) (4 L/min. (1,3 mm)), T-2A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Pilot-to-Close Check Valve
  • Capacity: 1 gpm (.05 inch) (4 L/min. (1,3 mm))
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-2A
Valve function
Pilot-to-Close Check Valve
Series (frame sizes)
2
Cavity
T-2A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A spring-closed check that passes oil from port 1 to port 2 and blocks the reverse. Pressure at the pilot port (port 3) acts against port 1 and holds it shut, so it can be closed on command even in its free-flow direction. Pressure at port 2 opposes the pilot directly.

This version

  • Built to discharge an accumulator when the pump stops: with no pump pressure at port 3 it opens the accumulator (port 1) to tank (port 2), and a pump pressure of only 60 psi (4 bar) on port 3 shuts it against up to 5,000 psi. Discharge is through a 0.05 in (1.27 mm) orifice, so very large accumulators may need a two-valve circuit.

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • COFO — series 2, T-2A cavity, 1 gpm (.05 inch) (4 L/min. (1,3 mm))

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 5 drops/min. (0,3 cc/min)

Configuration options

The letters after the base model code choose these options (shown for COFO; a size may add or drop a choice):

  • Control: X — Standard Pilot
  • Setting range: D — 60 psi (4 bar)
  • Seal material: N — Buna-N, V — Viton

Selection notes

  • Hardened steel seats for wear resistance and dirt tolerance.
  • Any drop in pilot pressure, even a momentary one, can let the valve open.

Where it is used

Accumulator discharge on shut-down, blocking a flow path while a function is pressurised, logic-style switching in pilot circuits.

Installation and seal kits

Hex 1 1/8 in. (28,6 mm); installation torque 45 - 50 lbf ft (61 - 68 Nm). Replacement seal kits — series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example COFOXDN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Installation

ParameterValue
Valve hex size1 1/8 in. (28,6 mm)
Installation torque45 - 50 lbf ft (61 - 68 Nm)
Seal kitsseries 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006
Weight.50 lb (0,25 kg)

Configuration

ParameterValue
Control / adjustmentX — Standard Pilot
Seal materialN — Buna-N, V — Viton

Identification

ParameterValue
Valve functionPilot-to-Close Check Valve
Series (frame sizes)2
CavityT-2A

Performance

ParameterValue
Capacity1 gpm (.05 inch) (4 L/min. (1,3 mm))
Max operating pressure5000 psi (350 bar)
Setting rangeD — 60 psi (4 bar)
Max leakage5 drops/min. (0,3 cc/min)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at