Sun Hydraulics Pilot-to-Close Check Valve — COBA to COKA, Series 0 to 4

Sun Hydraulics Pilot-to-Close Check Valve: COBA to COKA, series 0 to 4, 10 gpm to 240 gpm (40 L/min to 900 L/min), T-163A, T-11A, T-2A, T-17A, T-19A, T-19AU cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Pilot-to-Close Check Valve
- Capacity: 10 gpm to 240 gpm (40 L/min to 900 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-163A, T-11A, T-2A, T-17A, T-19A, T-19AU
- Valve function
- Pilot-to-Close Check Valve
- Series (frame sizes)
- 0 to 4
- Cavity
- T-163A, T-11A, T-2A, T-17A, T-19A, T-19AU
Product description
A spring-closed check that passes oil from port 1 to port 2 and blocks the reverse. Pressure at the pilot port (port 3) acts against port 1 and holds it shut, so it can be closed on command even in its free-flow direction. Pressure at port 2 opposes the pilot directly.
Sizes and cavities
Sun Hydraulics builds this valve in 7 versions:
- COBA — series 0, T-163A cavity, 10 gpm (40 L/min)
- COBG — series 0, T-163A cavity, 10 gpm (40 L/min)
- CODA — series 1, T-11A cavity, 20 gpm (80 L/min)
- COFA — series 2, T-2A cavity, 40 gpm (160 L/min)
- COHA — series 3, T-17A cavity, 80 gpm (320 L/min)
- COJA — series 4, T-19A cavity, 160 gpm (610 L/min)
- COKA — series 4, T-19AU cavity, 240 gpm (900 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Pilot ratio: 3:1, 1.8:1
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 1 drops/min. (0,07 cc/min)
Configuration options
The letters after the base model code choose these options (shown for CODA; a size may add or drop a choice):
- Control: X — Standard Pilot, L — Manual Override
- Check cracking pressure: A — 4 psi (0,3 bar), B — 15 psi (1 bar), C — 30 psi (2 bar), D — 50 psi (3,5 bar), E — 75 psi (5 bar), F — 100 psi (7 bar), G — 150 psi (10,5 bar), Z — 1 psi (0,07 bar)
- Seal material: N — Buna-N, V — Viton, E — EPDM
- Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel
Option rules: If the modifier is /AP, the control must be X; If the modifier is /LH, the control must be L or X; If the seal is E, the control must be L or X.
Selection notes
- Hardened steel seats for wear resistance and dirt tolerance.
- Any drop in pilot pressure, even a momentary one, can let the valve open.
Where it is used
Accumulator discharge on shut-down, blocking a flow path while a function is pressurised, logic-style switching in pilot circuits.
Installation and seal kits
Hex 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 0: Buna: 990163007, EPDM: 990163014, Polyurethane: 990163002, Viton: 990163006; series 1: Buna: 990011007, EPDM: 990011014, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, EPDM: 990202014, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, EPDM: 990019014, Polyurethane: 990019002, Viton: 990019006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CODAXCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 0: Buna: 990163007, EPDM: 990163014, Polyurethane: 990163002, Viton: 990163006; series 1: Buna: 990011007, EPDM: 990011014, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, EPDM: 990202014, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, EPDM: 990019014, Polyurethane: 990019002, Viton: 990019006 |
| Weight | .20 lb (0,10 kg) to 2.60 lb (1,20 kg) |
Identification
| Parameter | Value |
|---|---|
| Valve function | Pilot-to-Close Check Valve |
| Series (frame sizes) | 0 to 4 |
| Cavity | T-163A, T-11A, T-2A, T-17A, T-19A, T-19AU |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — Standard Pilot, L — Manual Override |
| Seal material | N — Buna-N, V — Viton, E — EPDM |
| Material / coating | /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel |
Performance
| Parameter | Value |
|---|---|
| Capacity | 10 gpm to 240 gpm (40 L/min to 900 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Pilot ratio | 3:1, 1.8:1 |
| Setting range | A — 4 psi (0,3 bar), B — 15 psi (1 bar), C — 30 psi (2 bar), D — 50 psi (3,5 bar), E — 75 psi (5 bar), F — 100 psi (7 bar), G — 150 psi (10,5 bar), Z — 1 psi (0,07 bar) |
| Max leakage | 1 drops/min. (0,07 cc/min) |
Shipping & lead time
Sizes & part numbers
7 sizes- Sun Hydraulics part no.COBA
- Series
- 0
- Cavity
- T-163A
- Capacity
- 10 gpm / 40 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.COBG
- Series
- 0
- Cavity
- T-163A
- Capacity
- 10 gpm / 40 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.CODA
- Series
- 1
- Cavity
- T-11A
- Capacity
- 20 gpm / 80 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.COFA
- Series
- 2
- Cavity
- T-2A
- Capacity
- 40 gpm / 160 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.COHA
- Series
- 3
- Cavity
- T-17A
- Capacity
- 80 gpm / 320 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.COJA
- Series
- 4
- Cavity
- T-19A
- Capacity
- 160 gpm / 610 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.COKA
- Series
- 4
- Cavity
- T-19AU
- Capacity
- 240 gpm / 900 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics COBA to COKA pilot-to-close check valve used for?▾
Which sizes and versions does the Sun Hydraulics COBA to COKA pilot-to-close check valve come in?▾
How do I read the Sun Hydraulics model code CODAXCN for the COBA to COKA pilot-to-close check valve?▾
What is the maximum operating pressure of the Sun Hydraulics COBA to COKA pilot-to-close check valve?▾
What flow capacity does the Sun Hydraulics COBA to COKA pilot-to-close check valve have by series?▾
Which seal materials and body finishes does the Sun Hydraulics COBA to COKA pilot-to-close check valve come with?▾
Which cavity does the Sun Hydraulics COBA to COKA pilot-to-close check valve fit?▾
Which seal kit fits the Sun Hydraulics COBA to COKA pilot-to-close check valve?▾
How is the Sun Hydraulics COBA to COKA pilot-to-close check valve installed?▾
Where is the Sun Hydraulics COBA to COKA pilot-to-close check valve used?▾
Sun Hydraulics COBA to COKA or CNDE, CNFE, CNHE, CNJE: what is the difference?▾
Do you stock the Sun Hydraulics COBA to COKA in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








