Skip to content
SUN HYDRAULICSIH-SUN-CS-CDYZ

Sun Hydraulics Single Ball Shuttle Valve with Signal at Port 2 — CSAC, CSAD, CSAY, CSAZ, Series 0 to 1

Check, Shuttle & Directional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics CSAD single ball shuttle valve, series 1, T-11A cavity — dimension drawing
VIEW 01·Sun Hydraulics CSAD single ball shuttle valve, series 1, T-11A cavity — dimension drawing
1 / 3

Sun Hydraulics Single Ball Shuttle Valve with Signal at Port 2: CSAC, CSAD, CSAY, CSAZ, series 0 to 1, 1.25 gpm to 2.5 gpm (4,7 L/min to 10 L/min), T-162A, T-163A, T-13A, T-11A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Single Ball Shuttle Valve
  • Capacity: 1.25 gpm to 2.5 gpm (4,7 L/min to 10 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-162A, T-163A, T-13A, T-11A
Valve function
Single Ball Shuttle Valve
Series (frame sizes)
0 to 1
Cavity
T-162A, T-163A, T-13A, T-11A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A ball shuttle connects whichever of two work ports is at the higher pressure to a common signal port and seals off the lower one. Hardened balls and seats tolerate dirt and wear well.

Sizes and cavities

Sun Hydraulics builds this valve in 4 versions:

  • CSAY — series 0, T-162A cavity, 1.25 gpm (4,7 L/min)
  • CSAZ — series 0, T-163A cavity, 1.25 gpm (4,7 L/min)
  • CSAC — series 1, T-13A cavity, 2.5 gpm (10 L/min)
  • CSAD — series 1, T-11A cavity, 2.5 gpm (10 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 5 drops/min. (0,3 cc/min)

Configuration options

The letters after the base model code choose these options (shown for CSAD; a size may add or drop a choice):

  • Control: A — Auxiliary External -4 SAE Port, B — Auxiliary External 1/4 BSPP Port, X — Not Adjustable, E — External 4-SAE Port, Port 3 blocked
  • Seal material: L — Extended Temp. Buna, N — Buna-N, V — Viton, E — EPDM
  • Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Option rules: EPDM seals are not allowed on modifier /LH; If the modifier is /AP, the control must be X; If the modifier is /LH, the control must be X; If the seal is E, the control must be X.

Selection notes

  • When both work ports fall, the ball lets the signal fall with them.
  • Floating construction keeps the ball and seats aligned if the cartridge is over-torqued.

Where it is used

Load-sensing signal networks, brake release taken from either motor port, picking the higher of two pressures for a gauge or pilot.

Installation and seal kits

Hex 3/4 in. (19,1 mm), 7/8 in. (22,2 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 0: Buna: 990162007, Polyurethane: 990162002, Viton: 990162006, Buna: 990163007, Polyurethane: 990163002, Viton: 990163006; series 1: Buna: 990010007, Polyurethane: 990010002, Viton: 990010006, Buna: 990011007, EPDM: 990011014, Polyurethane: 990011002, Viton: 990011006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CSADXXN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionSingle Ball Shuttle Valve
Series (frame sizes)0 to 1
CavityT-162A, T-163A, T-13A, T-11A

Performance

ParameterValue
Capacity1.25 gpm to 2.5 gpm (4,7 L/min to 10 L/min)
Max operating pressure5000 psi (350 bar)
Max leakage5 drops/min. (0,3 cc/min)

Configuration

ParameterValue
Control / adjustmentA — Auxiliary External -4 SAE Port, B — Auxiliary External 1/4 BSPP Port, X — Not Adjustable, E — External 4-SAE Port, Port 3 blocked
Seal materialL — Extended Temp. Buna, N — Buna-N, V — Viton, E — EPDM
Material / coating/AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Installation

ParameterValue
Valve hex size3/4 in. (19,1 mm), 7/8 in. (22,2 mm)
Installation torque20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm)
Seal kitsseries 0: Buna: 990162007, Polyurethane: 990162002, Viton: 990162006, Buna: 990163007, Polyurethane: 990163002, Viton: 990163006; series 1: Buna: 990010007, Polyurethane: 990010002, Viton: 990010006, Buna: 990011007, EPDM: 990011014, Polyurethane: 990011002, Viton: 990011006
Weight.20 lb (0,10 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at