Sun Hydraulics 20:1 Ratio Pilot-to-Close Check Valve — CODD

Sun Hydraulics 20:1 Ratio Pilot-to-Close Check Valve: CODD, series 1, .11 in. (2,8 mm), T-11A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Pilot-to-Close Check Valve
- Capacity: .11 in. (2,8 mm)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-11A
- Valve function
- Pilot-to-Close Check Valve
- Series (frame sizes)
- 1
- Cavity
- T-11A
Product description
A spring-closed check that passes oil from port 1 to port 2 and blocks the reverse. Pressure at the pilot port (port 3) acts against port 1 and holds it shut, so it can be closed on command even in its free-flow direction. Pressure at port 2 opposes the pilot directly.
This version
- A 20:1 ratio closes it against high inlet pressure with a small pilot; reverse flow from port 2 to port 1 is never possible.
Sizes and cavities
Sun Hydraulics builds this valve in one version:
- CODD — series 1, T-11A cavity, .11 in. (2,8 mm)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 1 drops/min. (0,07 cc/min)
Configuration options
The letters after the base model code choose these options (shown for CODD; a size may add or drop a choice):
- Control: X — Standard Pilot, L — Manual Override
- Check cracking pressure: D — 50 psi (3,5 bar), H — 200 psi (14 bar)
- Seal material: N — Buna-N, V — Viton, E — EPDM
- Material / coating: /AP — Stainless Steel, Passivated
Option rules: If the modifier is /AP, the control must be L or X; If the seal is E, the control must be L or X.
Selection notes
- Hardened steel seats for wear resistance and dirt tolerance.
- Any drop in pilot pressure, even a momentary one, can let the valve open.
Where it is used
Accumulator discharge on shut-down, blocking a flow path while a function is pressurised, logic-style switching in pilot circuits.
Installation and seal kits
Hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990011007, EPDM: 990011014, Polyurethane: 990011002, Viton: 990011006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CODDXDN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm) |
| Seal kits | series 1: Buna: 990011007, EPDM: 990011014, Polyurethane: 990011002, Viton: 990011006 |
Identification
| Parameter | Value |
|---|---|
| Valve function | Pilot-to-Close Check Valve |
| Series (frame sizes) | 1 |
| Cavity | T-11A |
Performance
| Parameter | Value |
|---|---|
| Capacity | .11 in. (2,8 mm) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | D — 50 psi (3,5 bar), H — 200 psi (14 bar) |
| Max leakage | 1 drops/min. (0,07 cc/min) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — Standard Pilot, L — Manual Override |
| Seal material | N — Buna-N, V — Viton, E — EPDM |
| Material / coating | /AP — Stainless Steel, Passivated |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.CODD
- Series
- 1
- Cavity
- T-11A
- Capacity
- .11 in. / 2,8 mm
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics CODD pilot-to-close check valve used for?▾
Which sizes and versions does the Sun Hydraulics CODD pilot-to-close check valve come in?▾
How do I read the Sun Hydraulics model code CODDXDN for the CODD pilot-to-close check valve?▾
What is the maximum operating pressure of the Sun Hydraulics CODD pilot-to-close check valve?▾
What flow capacity does the CODD pilot-to-close check valve have?▾
Which seal materials and body finishes does the Sun Hydraulics CODD pilot-to-close check valve come with?▾
Which cavity does the Sun Hydraulics CODD pilot-to-close check valve fit?▾
Which seal kit fits the Sun Hydraulics CODD pilot-to-close check valve?▾
How is the Sun Hydraulics CODD pilot-to-close check valve installed?▾
Where is the Sun Hydraulics CODD pilot-to-close check valve used?▾
Sun Hydraulics CODD or COFO: what is the difference?▾
Do you stock the Sun Hydraulics CODD in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








