Sun Hydraulics Single Ball Shuttle Valve, 3000 psi (210 bar) — CSTT

Sun Hydraulics Single Ball Shuttle Valve, 3000 psi (210 bar): CSTT, series 0C, 8 gpm (30 L/min), SC-08-03 cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Single Ball Shuttle Valve
- Capacity: 8 gpm (30 L/min)
- Max operating pressure: 3000 psi (210 bar)
- Cavity: SC-08-03
- Valve function
- Single Ball Shuttle Valve
- Series (frame sizes)
- 0C
- Cavity
- SC-08-03
Product description
A ball shuttle connects whichever of two work ports is at the higher pressure to a common signal port and seals off the lower one. Hardened balls and seats tolerate dirt and wear well.
This version
- At rest: 210 bar.
- Fits an industry-standard common cavity (SC-08 / SC-10 type) rather than a Sun T-series cavity.
- Rated to 3000 psi (210 bar).
Sizes and cavities
Sun Hydraulics builds this valve in one version:
- CSTT — series 0C, SC-08-03 cavity, 8 gpm (30 L/min), Common cavity
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series. Series 0C and 1C parts fit industry-standard common cavities (SC-08, SC-10) instead of Sun's T-series cavities.
Ratings
- Maximum operating pressure: 3000 psi (210 bar)
Configuration options
The letters after the base model code choose these options (shown for CSTT; a size may add or drop a choice):
- Control: X — Not Adjustable
- Seal material: N — Buna-N
Selection notes
- When both work ports fall, the ball lets the signal fall with them.
- Floating construction keeps the ball and seats aligned if the cartridge is over-torqued.
Where it is used
Load-sensing signal networks, brake release taken from either motor port, picking the higher of two pressures for a gauge or pilot.
Installation and seal kits
Hex 7/8 in. (22,2 mm); installation torque 21 - 23 lbf ft (28 - 31 Nm). Replacement seal kits — series 0C: Buna: 99C083007.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CSTTXXN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Single Ball Shuttle Valve |
| Series (frame sizes) | 0C |
| Cavity | SC-08-03 |
Performance
| Parameter | Value |
|---|---|
| Capacity | 8 gpm (30 L/min) |
| Max operating pressure | 3000 psi (210 bar) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — Not Adjustable |
| Seal material | N — Buna-N |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm) |
| Installation torque | 21 - 23 lbf ft (28 - 31 Nm) |
| Seal kits | series 0C: Buna: 99C083007 |
| Weight | .20 lb (0,10 kg) |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.CSTT
- Series
- 0C
- Cavity
- SC-08-03
- Capacity
- 8 gpm / 30 L/min
- Max pressure
- 3000 psi / 210 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics CSTT single ball shuttle valve used for?▾
Which sizes and versions does the Sun Hydraulics CSTT single ball shuttle valve come in?▾
How do I read the Sun Hydraulics model code CSTTXXN for the CSTT single ball shuttle valve?▾
What is the maximum operating pressure of the Sun Hydraulics CSTT single ball shuttle valve?▾
What flow capacity does the CSTT single ball shuttle valve have?▾
Which seal materials and body finishes does the Sun Hydraulics CSTT single ball shuttle valve come with?▾
Which cavity does the Sun Hydraulics CSTT single ball shuttle valve fit?▾
Which seal kit fits the Sun Hydraulics CSTT single ball shuttle valve?▾
How is the Sun Hydraulics CSTT single ball shuttle valve installed?▾
Where is the Sun Hydraulics CSTT single ball shuttle valve used?▾
Sun Hydraulics CSTT or CDAB: what is the difference?▾
Do you stock the Sun Hydraulics CSTT in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








