Sun Hydraulics Mechanically Operated, Back-to-Back Check Valve — CDAP, CDAQ, Series 0

Sun Hydraulics Mechanically Operated, Back-to-Back Check Valve: CDAP, CDAQ, series 0, 1.25 gpm (4,7 L/min), T-162DP cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Mechanically Operated Back-to-Back Check Valve
- Capacity: 1.25 gpm (4,7 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-162DP
- Valve function
- Mechanically Operated Back-to-Back Check Valve
- Series (frame sizes)
- 0
- Cavity
- T-162DP
Product description
Two checks back to back in one cartridge, built to sit inside a cylinder piston. At the end of the stroke a stop pushes the port-1 poppet off its seat, oil passes through the piston and two cylinders working in series come back into step. Sun calls it a phaser check.
Sizes and cavities
Sun Hydraulics builds this valve in 2 versions:
- CDAP — series 0, T-162DP cavity, 1.25 gpm (4,7 L/min)
- CDAQ — series 0, T-162DP cavity, 1.25 gpm (4,7 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 1 drops/min. (0,07 cc/min)
Configuration options
The letters after the base model code choose these options (shown for CDAQ; a size may add or drop a choice):
- Control: M — Mechanical Actuation
- Check cracking pressure: C — 30 psi (2 bar)
- Seal material: N — Buna-N, V — Viton
Selection notes
- The push must be axial and square to the valve within 5°; it cannot take side load and is not meant to be cam-operated.
- It is not a mechanical stop: limit poppet travel to 0.047 in (1.2 mm) with a separate stop.
- Installation needs Sun's special tool 998-101; port 2 of the cavity is not used.
Where it is used
Re-phasing master-slave and series cylinders on lifts, platforms and agricultural implements.
Installation and seal kits
Hex 3/4 in. (19,1 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm). Replacement seal kits — series 0: Buna: 990162007, Viton: 990162006, Polyurethane: 990162002.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CDAQMCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 3/4 in. (19,1 mm) |
| Installation torque | 20 - 25 lbf ft (27 - 33 Nm) |
| Seal kits | series 0: Buna: 990162007, Viton: 990162006, Polyurethane: 990162002 |
Identification
| Parameter | Value |
|---|---|
| Valve function | Mechanically Operated Back-to-Back Check Valve |
| Series (frame sizes) | 0 |
| Cavity | T-162DP |
Performance
| Parameter | Value |
|---|---|
| Capacity | 1.25 gpm (4,7 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | C — 30 psi (2 bar) |
| Max leakage | 1 drops/min. (0,07 cc/min) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | M — Mechanical Actuation |
| Seal material | N — Buna-N, V — Viton |
Shipping & lead time
Sizes & part numbers
2 sizes- Sun Hydraulics part no.CDAP
- Series
- 0
- Cavity
- T-162DP
- Capacity
- 1.25 gpm / 4,7 L/min
- Max pressure
- —
- Sun Hydraulics part no.CDAQ
- Series
- 0
- Cavity
- T-162DP
- Capacity
- 1.25 gpm / 4,7 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics CDAP, CDAQ mechanically operated back-to-back check valve used for?▾
Which sizes and versions does the Sun Hydraulics CDAP, CDAQ mechanically operated back-to-back check valve come in?▾
How do I read the Sun Hydraulics model code CDAQMCN for the CDAP, CDAQ mechanically operated back-to-back check valve?▾
What is the maximum operating pressure of the Sun Hydraulics CDAP, CDAQ mechanically operated back-to-back check valve?▾
What flow capacity does the Sun Hydraulics CDAP, CDAQ mechanically operated back-to-back check valve have by series?▾
Which seal materials and body finishes does the Sun Hydraulics CDAP, CDAQ mechanically operated back-to-back check valve come with?▾
Which cavity does the Sun Hydraulics CDAP, CDAQ mechanically operated back-to-back check valve fit?▾
Which seal kit fits the Sun Hydraulics CDAP, CDAQ mechanically operated back-to-back check valve?▾
How is the Sun Hydraulics CDAP, CDAQ mechanically operated back-to-back check valve installed?▾
Where is the Sun Hydraulics CDAP, CDAQ mechanically operated back-to-back check valve used?▾
Sun Hydraulics CDAP, CDAQ or CVCV, CVEV, CVGV, CVIV: what is the difference?▾
Do you stock the Sun Hydraulics CDAP, CDAQ in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








