Skip to content
SUN HYDRAULICSIH-SUN-CDAB

Sun Hydraulics Back-to-Back Check/Shuttle Valve with Signal at Port 3 — CDAB

Check, Shuttle & Directional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics CDAB back-to-back check / shuttle valve, series 1, T-11A cavity — dimension drawing
VIEW 01·Sun Hydraulics CDAB back-to-back check / shuttle valve, series 1, T-11A cavity — dimension drawing
1 / 3

Sun Hydraulics Back-to-Back Check/Shuttle Valve with Signal at Port 3: CDAB, series 1, 2.5 gpm (10 L/min), T-11A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Back-to-Back Check / Shuttle Valve
  • Capacity: 2.5 gpm (10 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-11A
Valve function
Back-to-Back Check / Shuttle Valve
Series (frame sizes)
1
Cavity
T-11A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

Two checks back to back in one cartridge, connecting the higher of two work ports to a common signal port. Hardened, lapped, guided poppets on a lightly stressed spring give very low leakage and long life.

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • CDAB — series 1, T-11A cavity, 2.5 gpm (10 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 5 drops/min. (0,3 cc/min)

Configuration options

The letters after the base model code choose these options (shown for CDAB; a size may add or drop a choice):

  • Control: A — Auxiliary External -4 SAE Port, B — Auxiliary External 1/4 BSPP Port, X — Not Adjustable, E — External 4-SAE Port, Port 3 blocked
  • Check cracking pressure: B — 15 psi (1 bar)
  • Seal material: N — Buna-N, V — Viton
  • Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Option rules: If the modifier is /AP, the control must be X; If the modifier is /LH, the control must be X.

Selection notes

  • It holds the highest pressure it has seen: if the load ports fall, the signal stays trapped, so the circuit needs a way to bleed it.
  • Floating construction keeps the poppets free if the cartridge is over-torqued.

Where it is used

Load-sensing and pilot circuits where the signal must not leak away between strokes.

Installation and seal kits

Hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CDABXBN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionBack-to-Back Check / Shuttle Valve
Series (frame sizes)1
CavityT-11A

Performance

ParameterValue
Capacity2.5 gpm (10 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeB — 15 psi (1 bar)
Max leakage5 drops/min. (0,3 cc/min)

Configuration

ParameterValue
Control / adjustmentA — Auxiliary External -4 SAE Port, B — Auxiliary External 1/4 BSPP Port, X — Not Adjustable, E — External 4-SAE Port, Port 3 blocked
Seal materialN — Buna-N, V — Viton
Material / coating/AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm)
Seal kitsseries 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006
Weight.30 lb (0,15 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at