Sun Hydraulics Ventable Fixed-Orifice, Pressure Compensated Flow Control Valve with Integral T-8A Control Cavity — FXDA8

Sun Hydraulics ventable pressure-compensated flow control with T-8A pilot cavity: FXDA8, series 2, 12 gpm (45 L/min), T-5A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Ventable Pressure-Compensated Flow Control with T-8A Pilot Cavity
- Capacity: 12 gpm (45 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-5A
- Valve function
- Ventable Pressure-Compensated Flow Control with T-8A Pilot Cavity
- Series (frame sizes)
- 2
- Cavity
- T-5A
Product description
A fixed-orifice, pressure-compensated flow control with an integral T-8A pilot cavity, so the flow can be switched on and off or vented by the pilot cartridge fitted there.
Sizes and cavities
Sun Hydraulics builds this valve in 1 size. The series sets the cavity it screws into and its flow capacity:
- FXDA8 — series 2, T-5A cavity, 12 gpm (45 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
Configuration options
The letters after the base model code choose these options (shown for FXDA8; a size may add or drop a choice):
- Setting range: A — Replaceable Orifice .1 - 12 gpm (0,4 - 45 L/min.), B — Permanent Orifice .1 - 12 gpm (0,4 - 45 L/min.)
- Seal material: N — Buna-N, V — Viton, E — EPDM
Selection notes
- Factory-set flow within about ±10%.
- Fit the main stage first, then the T-8A pilot, each to its own torque.
Where it is used
Switchable fixed-speed functions without a separate directional valve.
Installation and seal kits
Valve hex 1 1/8 in. (28,6 mm); installation torque 45 - 50 lbf ft (61 - 68 Nm). Replacement seal kits — series 2: Buna: 990203007, Viton: 990203006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example FXDA8AN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Ventable Pressure-Compensated Flow Control with T-8A Pilot Cavity |
| Series (frame sizes) | 2 |
| Cavity | T-5A |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 1 1/8 in. (28,6 mm) |
| Installation torque | 45 - 50 lbf ft (61 - 68 Nm) |
| Seal kits | series 2: Buna: 990203007, Viton: 990203006 |
| Weight | .40 lb (0,20 kg) |
Performance
| Parameter | Value |
|---|---|
| Capacity | 12 gpm (45 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | A — Replaceable Orifice .1 - 12 gpm (0,4 - 45 L/min.), B — Permanent Orifice .1 - 12 gpm (0,4 - 45 L/min.) |
Configuration
| Parameter | Value |
|---|---|
| Seal material | N — Buna-N, V — Viton, E — EPDM |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.FXDA8
- Series
- 2
- Cavity
- T-5A
- Capacity
- 12 gpm / 45 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics FXDA8 ventable pressure-compensated flow control with T-8A pilot cavity used for?▾
Which sizes and versions does the Sun Hydraulics FXDA8 ventable pressure-compensated flow control with T-8A pilot cavity come in?▾
How do I read the Sun Hydraulics model code FXDA8AN for the FXDA8 ventable pressure-compensated flow control with T-8A pilot cavity?▾
What is the maximum operating pressure of the Sun Hydraulics FXDA8 ventable pressure-compensated flow control with T-8A pilot cavity?▾
What flow capacity does the FXDA8 ventable pressure-compensated flow control with T-8A pilot cavity have?▾
Which seal materials and body finishes does the Sun Hydraulics FXDA8 ventable pressure-compensated flow control with T-8A pilot cavity come with?▾
Which cavity does the Sun Hydraulics FXDA8 ventable pressure-compensated flow control with T-8A pilot cavity fit?▾
Which seal kit fits the Sun Hydraulics FXDA8 ventable pressure-compensated flow control with T-8A pilot cavity?▾
How is the Sun Hydraulics FXDA8 ventable pressure-compensated flow control with T-8A pilot cavity installed?▾
Where is the Sun Hydraulics FXDA8 ventable pressure-compensated flow control with T-8A pilot cavity used?▾
Sun Hydraulics FXDA8 or FVCA8, FVDA8, FVEA8, FVFA8: what is the difference?▾
Do you stock the Sun Hydraulics FXDA8 in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








