Sun Hydraulics Insert Style, Pressure Compensated Flow Control — FXAM

Sun Hydraulics miniature pressure-compensated flow control: FXAM, series P, .5 gpm (2 L/min), T-8DP cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Miniature Pressure-Compensated Flow Control
- Capacity: .5 gpm (2 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-8DP
- Valve function
- Miniature Pressure-Compensated Flow Control
- Series (frame sizes)
- P
- Cavity
- T-8DP
Product description
A small fixed-orifice, pressure-compensated flow control for low flows, built for the T-8A family of cavities. The flush-mount type sits level with the manifold face, and the insert type is buried inside a manifold or actuator.
Sizes and cavities
Sun Hydraulics builds this valve in 1 size. The series sets the cavity it screws into and its flow capacity:
- FXAM — series P, T-8DP cavity, .5 gpm (2 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
Configuration options
The letters after the base model code choose these options (shown for FXAM; a size may add or drop a choice):
- Control: X — Not Adjustable
- Seal material: N — Buna-N, V — Viton
Selection notes
- Both ports accept 5,000 psi (350 bar).
- Insert-style valves rely on the cavity drawing — check it before machining.
Where it is used
Low-flow speed control, pilot circuits and compact manifolds or actuators.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example FXAMXAN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Miniature Pressure-Compensated Flow Control |
| Series (frame sizes) | P |
| Cavity | T-8DP |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — Not Adjustable |
| Seal material | N — Buna-N, V — Viton |
Performance
| Parameter | Value |
|---|---|
| Capacity | .5 gpm (2 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
Installation
| Parameter | Value |
|---|---|
| Installation torque | 20 - 25 lbf ft (27 - 33 Nm) |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.FXAM
- Series
- P
- Cavity
- T-8DP
- Capacity
- .5 gpm / 2 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics FXAM miniature pressure-compensated flow control used for?▾
Which sizes and versions does the Sun Hydraulics FXAM miniature pressure-compensated flow control come in?▾
How do I read the Sun Hydraulics model code FXAMXAN for the FXAM miniature pressure-compensated flow control?▾
What is the maximum operating pressure of the Sun Hydraulics FXAM miniature pressure-compensated flow control?▾
What flow capacity does the FXAM miniature pressure-compensated flow control have?▾
Which seal materials and body finishes does the Sun Hydraulics FXAM miniature pressure-compensated flow control come with?▾
Which cavity does the Sun Hydraulics FXAM miniature pressure-compensated flow control fit?▾
Which seal kit fits the Sun Hydraulics FXAM miniature pressure-compensated flow control?▾
How is the Sun Hydraulics FXAM miniature pressure-compensated flow control installed?▾
Where is the Sun Hydraulics FXAM miniature pressure-compensated flow control used?▾
Sun Hydraulics FXAM or FXAG: what is the difference?▾
Do you stock the Sun Hydraulics FXAM in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








