Skip to content
SUN HYDRAULICSIH-SUN-CX-E

Sun Hydraulics Free Flow Side to Nose Check Valve with Port 3 Blocked — CXCE, CXEE, CXGE, CXIE, Series 1 to 4

Check, Shuttle & Directional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics CXCE free-flow side-to-nose check valve, series 1, T-11A cavity — dimension drawing
VIEW 01·Sun Hydraulics CXCE free-flow side-to-nose check valve, series 1, T-11A cavity — dimension drawing
1 / 3

Sun Hydraulics Free Flow Side to Nose Check Valve with Port 3 Blocked: CXCE, CXEE, CXGE, CXIE, series 1 to 4, 15 gpm to 120 gpm (60 L/min to 480 L/min), T-11A, T-2A, T-17A, T-19A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Free-Flow Side-to-Nose Check Valve
  • Capacity: 15 gpm to 120 gpm (60 L/min to 480 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-11A, T-2A, T-17A, T-19A
Valve function
Free-Flow Side-to-Nose Check Valve
Series (frame sizes)
1 to 4
Cavity
T-11A, T-2A, T-17A, T-19A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A check cartridge that passes oil freely from the side (port 2) into the nose (port 1) and blocks the reverse. In a 3-port cavity the third port is blanked, so the valve works as a plain 2-port check where a 3-port cavity has been machined.

This version

  • Port 3 is blocked, so it works as a 2-port check in a 3-port cavity.

Sizes and cavities

Sun Hydraulics builds this valve in 4 versions:

  • CXCE — series 1, T-11A cavity, 15 gpm (60 L/min)
  • CXEE — series 2, T-2A cavity, 30 gpm (120 L/min)
  • CXGE — series 3, T-17A cavity, 60 gpm (240 L/min)
  • CXIE — series 4, T-19A cavity, 120 gpm (480 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 1 drops/min. (0,07 cc/min)

Configuration options

The letters after the base model code choose these options (shown for CXCE; a size may add or drop a choice):

  • Control: X — Not Adjustable, L — Manual Override
  • Check cracking pressure: A — 4 psi (0,3 bar), B — 15 psi (1 bar), C — 30 psi (2 bar), D — 50 psi (3,5 bar), E — 75 psi (5 bar), F — 100 psi (7 bar), Z — 1 psi (0,07 bar)
  • Seal material: N — Buna-N, V — Viton
  • Material / coating: /LH — Mild Steel, Zinc-Nickel

Option rules: If the modifier is /LH, the control must be L or X.

Selection notes

  • With a bypass orifice in a full-time regeneration circuit, rod-end pressure falls to zero once the cylinder stops, so it develops full force at the end of stroke.
  • Floating construction keeps the poppet free even if the cartridge is over-torqued.

Where it is used

Regeneration circuits, cylinder ports and any 3-port cavity that only needs a check.

Installation and seal kits

Hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CXCEXCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionFree-Flow Side-to-Nose Check Valve
Series (frame sizes)1 to 4
CavityT-11A, T-2A, T-17A, T-19A

Performance

ParameterValue
Capacity15 gpm to 120 gpm (60 L/min to 480 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeA — 4 psi (0,3 bar), B — 15 psi (1 bar), C — 30 psi (2 bar), D — 50 psi (3,5 bar), E — 75 psi (5 bar), F — 100 psi (7 bar), Z — 1 psi (0,07 bar)
Max leakage1 drops/min. (0,07 cc/min)

Configuration

ParameterValue
Control / adjustmentX — Not Adjustable, L — Manual Override
Seal materialN — Buna-N, V — Viton
Material / coating/LH — Mild Steel, Zinc-Nickel

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm)
Seal kitsseries 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006
Weight.20 lb (0,10 kg) to 1.90 lb (0,85 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at