Skip to content
SUN HYDRAULICSIH-SUN-CX-C

Sun Hydraulics Free Flow Nose to Side Check Valve with Port 3 Blocked — CXDC, CXFC, CXHC, CXJC, Series 1 to 4

Check, Shuttle & Directional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics CXDC free-flow nose-to-side check valve, series 1, T-11A cavity — dimension drawing
VIEW 01·Sun Hydraulics CXDC free-flow nose-to-side check valve, series 1, T-11A cavity — dimension drawing
1 / 3

Sun Hydraulics Free Flow Nose to Side Check Valve with Port 3 Blocked: CXDC, CXFC, CXHC, CXJC, series 1 to 4, 20 gpm to 120 gpm (80 L/min to 480 L/min), T-11A, T-2A, T-17A, T-19A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Free-Flow Nose-to-Side Check Valve
  • Capacity: 20 gpm to 120 gpm (80 L/min to 480 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-11A, T-2A, T-17A, T-19A
Valve function
Free-Flow Nose-to-Side Check Valve
Series (frame sizes)
1 to 4
Cavity
T-11A, T-2A, T-17A, T-19A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A screw-in check cartridge that lets oil flow freely from the nose (port 1) out of the side (port 2) and seals against flow the other way. A hardened, lapped poppet gives near-zero leakage, and both ports are rated for 5,000 psi (350 bar).

This version

  • Port 3 is blocked, so it works as a 2-port check in a 3-port cavity.

Sizes and cavities

Sun Hydraulics builds this valve in 4 versions:

  • CXDC — series 1, T-11A cavity, 20 gpm (80 L/min)
  • CXFC — series 2, T-2A cavity, 40 gpm (160 L/min)
  • CXHC — series 3, T-17A cavity, 80 gpm (320 L/min)
  • CXJC — series 4, T-19A cavity, 120 gpm (480 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 1 drops/min. (0,07 cc/min)

Configuration options

The letters after the base model code choose these options (shown for CXDC; a size may add or drop a choice):

  • Control: X — Not Adjustable
  • Check cracking pressure: A — 4 psi (0,3 bar), B — 15 psi (1 bar), C — 30 psi (2 bar), D — 50 psi (3,5 bar), E — 75 psi (5 bar), F — 100 psi (7 bar), Z — 1 psi (0,07 bar)
  • Seal material: N — Buna-N, V — Viton
  • Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Option rules: If the modifier is /AP, the control must be X; If the modifier is /LH, the control must be X.

Selection notes

  • Floating construction keeps the poppet free even if the cartridge is over-torqued or the cavity is slightly out.
  • EPDM seals are for phosphate-ester fluids only; petroleum oils and greases attack them.

Where it is used

Pump outlet checks, load-holding checks in a manifold, isolating one branch of a circuit from another.

Installation and seal kits

Hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CXDCXCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm)
Seal kitsseries 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006

Identification

ParameterValue
Valve functionFree-Flow Nose-to-Side Check Valve
Series (frame sizes)1 to 4
CavityT-11A, T-2A, T-17A, T-19A

Performance

ParameterValue
Capacity20 gpm to 120 gpm (80 L/min to 480 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeA — 4 psi (0,3 bar), B — 15 psi (1 bar), C — 30 psi (2 bar), D — 50 psi (3,5 bar), E — 75 psi (5 bar), F — 100 psi (7 bar), Z — 1 psi (0,07 bar)
Max leakage1 drops/min. (0,07 cc/min)

Configuration

ParameterValue
Control / adjustmentX — Not Adjustable
Seal materialN — Buna-N, V — Viton
Material / coating/AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at