Sun Hydraulics Electro-Proportional Flow Control Valve, Normally Open — FPCH

Sun Hydraulics electro-proportional throttle valve: FPCH, series 1, 7 gpm (28 L/min), T-13A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Electro-Proportional Throttle Valve
- Capacity: 7 gpm (28 L/min)
- Cavity: T-13A
- Valve function
- Electro-Proportional Throttle Valve
- Series (frame sizes)
- 1
- Cavity
- T-13A
Product description
A direct-acting proportional throttle: the coil current sets the size of a metering orifice, normally closed or normally open depending on the version. It largely compensates itself in the 1-to-2 direction and needs an external compensator for proportional control the other way.
Sizes and cavities
Sun Hydraulics builds this valve in 1 size. The series sets the cavity it screws into and its flow capacity:
- FPCH — series 1, T-13A cavity, 7 gpm (28 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum leakage: 6 in³/min.@3000 psi (100 cc/min.@210 bar)
Configuration options
The letters after the base model code choose these options (shown for FPCH; a size may add or drop a choice):
- Control: X — No Manual Override, D — Twist/Lock (Dual) Manual Override, E — Twist (Extended) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override, T — Twist (Momentary) Manual Override
- Seal material: N — Buna-N, V — Viton, E — EPDM
Option rules: If the coil is in this group (HN24AA, HN24AB), the control must be M or X; If the seal is E, the control must be D,E,L,M,T or X.
Selection notes
- Full reverse flow is possible without a compensator.
- Manual override available.
Where it is used
Electronic speed control of cylinders and motors.
Installation and seal kits
Valve hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990413007, Polyurethane: 990413002, Viton: 990413006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example FPCHXCN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Electro-Proportional Throttle Valve |
| Series (frame sizes) | 1 |
| Cavity | T-13A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 7 gpm (28 L/min) |
| Max leakage | 6 in³/min.@3000 psi (100 cc/min.@210 bar) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — No Manual Override, D — Twist/Lock (Dual) Manual Override, E — Twist (Extended) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override, T — Twist (Momentary) Manual Override |
| Seal material | N — Buna-N, V — Viton, E — EPDM |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm) |
| Seal kits | series 1: Buna: 990413007, Polyurethane: 990413002, Viton: 990413006 |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.FPCH
- Series
- 1
- Cavity
- T-13A
- Capacity
- 7 gpm / 28 L/min
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics FPCH electro-proportional throttle valve used for?▾
Which sizes and versions does the Sun Hydraulics FPCH electro-proportional throttle valve come in?▾
How do I read the Sun Hydraulics model code FPCHXCN for the FPCH electro-proportional throttle valve?▾
What is the maximum operating pressure of the Sun Hydraulics FPCH electro-proportional throttle valve?▾
What flow capacity does the FPCH electro-proportional throttle valve have?▾
Which seal materials and body finishes does the Sun Hydraulics FPCH electro-proportional throttle valve come with?▾
Which cavity does the Sun Hydraulics FPCH electro-proportional throttle valve fit?▾
Which seal kit fits the Sun Hydraulics FPCH electro-proportional throttle valve?▾
How is the Sun Hydraulics FPCH electro-proportional throttle valve installed?▾
Where is the Sun Hydraulics FPCH electro-proportional throttle valve used?▾
Sun Hydraulics FPCH or FPCC: what is the difference?▾
Do you stock the Sun Hydraulics FPCH in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








