Skip to content
SUN HYDRAULICSIH-SUN-FREP

Sun Hydraulics FLeX Series 3-Way, Direct-Acting, Electro-Proportional, Bypass/Restrictive, Priority Flow Control Valve — FREP

Flow Control CartridgesEx-stock · delivery in 3 days
Sun Hydraulics FREP electro-proportional priority flow control valve, series 3, T-17A cavity — dimension drawing
VIEW 01·Sun Hydraulics FREP electro-proportional priority flow control valve, series 3, T-17A cavity — dimension drawing
1 / 3

Sun Hydraulics electro-proportional priority flow control valve: FREP, series 3, 30 gpm (120 L/min), T-17A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Electro-Proportional Priority Flow Control Valve
  • Capacity: 30 gpm (120 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-17A
Valve function
Electro-Proportional Priority Flow Control Valve
Series (frame sizes)
3
Cavity
T-17A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A normally closed, proportional priority flow control in the FLeX Series: the coil sets the priority flow to port 3, compensated against pressure changes, and the excess goes out of port 2. Blocking port 2 turns it into a 2-way proportional, compensated flow control.

Sizes and cavities

Sun Hydraulics builds this valve in 1 size. The series sets the cavity it screws into and its flow capacity:

  • FREP — series 3, T-17A cavity, 30 gpm (120 L/min)

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Typical response time: 50 ms

Configuration options

The letters after the base model code choose these options (shown for FREP; a size may add or drop a choice):

  • Control: P — Manual Pull Override, X — No Manual Override
  • Seal material: N — Buna-N, V — Viton

Option rules: If the coil is in this group (211, 212, 212D, 212X01, 212X02, 214, 214D, 214X01, 214X02, 223, 224, 224D, 224X01, 224X02, 228, 228D, 228X02, 612D, 614D, 624D, 628D, 712D, 714D, 724D, 812, 814, 824, 828, 912, 912X01, 914, 914X01, 924X01, 928, 928D, 928X02), the range must be A, B or C; If the coil is in this group (228X01, 612, 614, 624, 628, 712, 714, 724, 728, 812D, 814D, 824D, 828D, 912D, 912X02, 914D, 914X02, 924X02, 928X01), the range must be C, B or A; If the coil is in this group (924), the range must be B, A or C; If the coil is in this group (924D), the range must be A, C or B; If the coil is in this group (JM24BD, JM24CD, JN24BD, JN24CD), the control must be X; If the coil is in this group (JM24BD, JM24CD, JN24BD, JN24CD), the range must be C, A or B.

Selection notes

  • Pull-type solenoid design makes the throttle less sensitive to flow forces.

Where it is used

Electronically set priority and fan-drive circuits on mobile machines.

Installation and seal kits

Valve hex 1 1/4 in. (31,8 mm); installation torque 150 - 160 lbf ft (203 - 217 Nm). Replacement seal kits — series 3: Buna: 990017007, Viton: 990017006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example FREPXAN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionElectro-Proportional Priority Flow Control Valve
Series (frame sizes)3
CavityT-17A

Performance

ParameterValue
Capacity30 gpm (120 L/min)
Max operating pressure5000 psi (350 bar)

Configuration

ParameterValue
Control / adjustmentP — Manual Pull Override, X — No Manual Override
Seal materialN — Buna-N, V — Viton

Installation

ParameterValue
Valve hex size1 1/4 in. (31,8 mm)
Installation torque150 - 160 lbf ft (203 - 217 Nm)
Seal kitsseries 3: Buna: 990017007, Viton: 990017006
Weight1.20 lb (0,55 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at