Sun Hydraulics Pilot-Operated, Normally Closed, Electro-Proportional Throttle with Reverse Flow Check, (740 Series) — FPJP

Sun Hydraulics pilot-operated electro-proportional throttle: FPJP, series 4, 114 gpm (431 L/min), T-18A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Pilot-Operated Electro-Proportional Throttle
- Capacity: 114 gpm (431 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-18A
- Valve function
- Pilot-Operated Electro-Proportional Throttle
- Series (frame sizes)
- 4
- Cavity
- T-18A
Product description
A pilot-operated proportional throttle with a poppet main stage: the coil acts on a small pilot that opens or closes the main poppet in proportion to current. Normally closed and normally open versions exist, with or without a free-flow reverse check; FLeX Series models are built for XMD drivers.
Sizes and cavities
Sun Hydraulics builds this valve in 1 size. The series sets the cavity it screws into and its flow capacity:
- FPJP — series 4, T-18A cavity, 114 gpm (431 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 20 drops/min.@5000 psi
Configuration options
The letters after the base model code choose these options (shown for FPJP; a size may add or drop a choice):
- Control: X — -
- Seal material: N — Buna-N, V — Viton
Option rules: If the coil is in this group (211, JN24CD), the range must be B, G or D; If the coil is in this group (212, 212D, 212X01, 212X02, 214, 214D, 214X01, 214X02, 223, 224, 224D, 224X01, 224X02, 228, 228D, 228X01, 228X02, 612, 612D, 614, 614D, 624, 624D, 628, 628D, 712, 712D, 714, 714D, 724D, 728, 728D, 812, 812D, 814, 814D, 824, 828, 828D, 912, 912D, 912X01, 912X02, 914, 914D, 914X01, 914X02, 924, 924D, 924X01, 924X02, 928, 928X01, JM24BD, JM24CD, JN24BD), the range must be B, D or G; If the coil is in this group (724, 928D, 928X02), the range must be G, D or B; If the coil is in this group (824D), the range must be G, B or D.
Selection notes
- Very low leakage in the closed position.
- Without the check, reverse flow closes the valve and only pilot flow passes.
- FLeX Series versions are cycle-tested to 10 million operations.
Where it is used
Leak-tight proportional control of mobile functions — lowering, slewing and lift circuits.
Installation and seal kits
Valve hex 1 5/8 in. (41,3 mm); installation torque 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 4: Buna: 990018007, Viton: 990018006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example FPJPXGN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Pilot-Operated Electro-Proportional Throttle |
| Series (frame sizes) | 4 |
| Cavity | T-18A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 114 gpm (431 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Max leakage | 20 drops/min.@5000 psi |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — - |
| Seal material | N — Buna-N, V — Viton |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 1 5/8 in. (41,3 mm) |
| Installation torque | 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 4: Buna: 990018007, Viton: 990018006 |
| Weight | 2.36 lb |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.FPJP
- Series
- 4
- Cavity
- T-18A
- Capacity
- 114 gpm / 431 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics FPJP pilot-operated electro-proportional throttle used for?▾
Which sizes and versions does the Sun Hydraulics FPJP pilot-operated electro-proportional throttle come in?▾
How do I read the Sun Hydraulics model code FPJPXGN for the FPJP pilot-operated electro-proportional throttle?▾
What is the maximum operating pressure of the Sun Hydraulics FPJP pilot-operated electro-proportional throttle?▾
What flow capacity does the FPJP pilot-operated electro-proportional throttle have?▾
Which seal materials and body finishes does the Sun Hydraulics FPJP pilot-operated electro-proportional throttle come with?▾
Which cavity does the Sun Hydraulics FPJP pilot-operated electro-proportional throttle fit?▾
Which seal kit fits the Sun Hydraulics FPJP pilot-operated electro-proportional throttle?▾
How is the Sun Hydraulics FPJP pilot-operated electro-proportional throttle installed?▾
Where is the Sun Hydraulics FPJP pilot-operated electro-proportional throttle used?▾
Sun Hydraulics FPJP or FPBG: what is the difference?▾
Do you stock the Sun Hydraulics FPJP in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Hammerverschraubung Typ 740
- fr
- union à marteau type 740
- es
- unión de martillo tipo 740
- it
- giunto a martello tipo 740








