Sun Hydraulics 3-Way, Fully Adjustable, Bypass/Restrictive, Priority Flow Control Valve — FREL

Sun Hydraulics adjustable priority flow control valve: FREL, series 3, 30 gpm (120 L/min), T-17A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Adjustable Priority Flow Control Valve
- Capacity: 30 gpm (120 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-17A
- Valve function
- Adjustable Priority Flow Control Valve
- Series (frame sizes)
- 3
- Cavity
- T-17A
Product description
A fully adjustable, pressure-compensated priority flow control: flow at port 1 supplies the priority outlet (port 3) first, and the excess goes out of port 2. With port 2 blocked it works as a 2-way pressure-compensated flow control.
Sizes and cavities
Sun Hydraulics builds this valve in 1 size. The series sets the cavity it screws into and its flow capacity:
- FREL — series 3, T-17A cavity, 30 gpm (120 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Typical response time: 50 ms
Configuration options
The letters after the base model code choose these options (shown for FREL; a size may add or drop a choice):
- Control: H — Calibrated Handknob with Detent Lock, K — Handknob, L — Standard Screw Adjustment, Y — Tri-Grip Handknob
- Setting range: A — .02 - 18 gpm
- Seal material: N — Buna-N, V — Viton
Selection notes
- Both priority and bypass flows are usable to full system pressure.
- Can be field-adjusted, so the flow need not be fixed when ordering.
Where it is used
Setting priority flow on the machine instead of at the factory.
Installation and seal kits
Valve hex 1 1/4 in. (31,8 mm); installation torque 150 - 160 lbf ft (203 - 217 Nm).
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example FRELLAN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Adjustable Priority Flow Control Valve |
| Series (frame sizes) | 3 |
| Cavity | T-17A |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 1 1/4 in. (31,8 mm) |
| Installation torque | 150 - 160 lbf ft (203 - 217 Nm) |
| Weight | 1.20 lb (0,55 kg) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | H — Calibrated Handknob with Detent Lock, K — Handknob, L — Standard Screw Adjustment, Y — Tri-Grip Handknob |
| Seal material | N — Buna-N, V — Viton |
Performance
| Parameter | Value |
|---|---|
| Capacity | 30 gpm (120 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | A — .02 - 18 gpm |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.FREL
- Series
- 3
- Cavity
- T-17A
- Capacity
- 30 gpm / 120 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics FREL adjustable priority flow control valve used for?▾
Which sizes and versions does the Sun Hydraulics FREL adjustable priority flow control valve come in?▾
How do I read the Sun Hydraulics model code FRELLAN for the FREL adjustable priority flow control valve?▾
What is the maximum operating pressure of the Sun Hydraulics FREL adjustable priority flow control valve?▾
What flow capacity does the FREL adjustable priority flow control valve have?▾
Which seal materials and body finishes does the Sun Hydraulics FREL adjustable priority flow control valve come with?▾
Which cavity does the Sun Hydraulics FREL adjustable priority flow control valve fit?▾
Which seal kit fits the Sun Hydraulics FREL adjustable priority flow control valve?▾
How is the Sun Hydraulics FREL adjustable priority flow control valve installed?▾
Where is the Sun Hydraulics FREL adjustable priority flow control valve used?▾
Sun Hydraulics FREL or FRBA, FRCA, FRDA, FREA, FRFA: what is the difference?▾
Do you stock the Sun Hydraulics FREL in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








