Sun Hydraulics Closed Center, Flow Divider-Combiner Valve — FSCA, FSDA, FSEA, FSFA, Series 1 to 4

Sun Hydraulics flow divider/combiner valve: FSCA, FSDA, FSEA, FSFA, series 1 to 4, 1.5 - 8 gpm to 12 - 60 gpm (6 - 30 L/min to 45 - 240 L/min), T-31A, T-32A, T-33A, T-34A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Flow Divider/Combiner Valve
- Capacity: 1.5 - 8 gpm to 12 - 60 gpm (6 - 30 L/min to 45 - 240 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-31A, T-32A, T-33A, T-34A
- Valve function
- Flow Divider/Combiner Valve
- Series (frame sizes)
- 1 to 4
- Cavity
- T-31A, T-32A, T-33A, T-34A
Product description
A sliding-spool, pressure-compensated valve that divides flow in one direction and combines it in the other, so two cylinders or motors can be run together both ways. Closed-centre designs block the outlets from each other at rest; high-accuracy versions hold the split more closely; high-capacity versions carry about 15% more flow for traction drives, with lower accuracy.
Sizes and cavities
Sun Hydraulics builds this valve in 4 sizes. The series sets the cavity it screws into and its flow capacity:
- FSCA — series 1, T-31A cavity, 1.5 - 8 gpm (6 - 30 L/min)
- FSDA — series 2, T-32A cavity, 3 - 15 gpm (12 - 60 L/min)
- FSEA — series 3, T-33A cavity, 6 - 30 gpm (23 - 120 L/min)
- FSFA — series 4, T-34A cavity, 12 - 60 gpm (45 - 240 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
Configuration options
The letters after the base model code choose these options (shown for FSCA; a size may add or drop a choice):
- Control: X — Not Adjustable
- Seal material: N — Buna-N, V — Viton
- Material / coating: /AP — Stainless Steel, Passivated
Option rules: If the modifier is /AP, the control must be X.
Selection notes
- Divides with a small error that grows over repeated strokes.
- Shares the cavity of Sun's flow dividers of the same frame size.
Where it is used
Paired lift cylinders, scissor and platform lifts, and two-motor traction drives.
Installation and seal kits
Valve hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 1: Buna: 990031007, Polyurethane: 990031002, Viton: 990031006; series 2: Buna: 990032007, EPDM: 990032014, Polyurethane: 990032002, Viton: 990032006; series 3: Buna: 990033007, Polyurethane: 990033002, Viton: 990033006; series 4: Buna: 990034007, Polyurethane: 990034002, Viton: 990034006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example FSCAXAN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 1: Buna: 990031007, Polyurethane: 990031002, Viton: 990031006; series 2: Buna: 990032007, EPDM: 990032014, Polyurethane: 990032002, Viton: 990032006; series 3: Buna: 990033007, Polyurethane: 990033002, Viton: 990033006; series 4: Buna: 990034007, Polyurethane: 990034002, Viton: 990034006 |
| Weight | .60 lb (0,30 kg) to 2.80 lb (1,30 kg) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — Not Adjustable |
| Seal material | N — Buna-N, V — Viton |
| Material / coating | /AP — Stainless Steel, Passivated |
Identification
| Parameter | Value |
|---|---|
| Valve function | Flow Divider/Combiner Valve |
| Series (frame sizes) | 1 to 4 |
| Cavity | T-31A, T-32A, T-33A, T-34A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 1.5 - 8 gpm to 12 - 60 gpm (6 - 30 L/min to 45 - 240 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
Shipping & lead time
Sizes & part numbers
4 sizes- Sun Hydraulics part no.FSCA
- Series
- 1
- Cavity
- T-31A
- Capacity
- 1.5 - 8 gpm / 6 - 30 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.FSDA
- Series
- 2
- Cavity
- T-32A
- Capacity
- 3 - 15 gpm / 12 - 60 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.FSEA
- Series
- 3
- Cavity
- T-33A
- Capacity
- 6 - 30 gpm / 23 - 120 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.FSFA
- Series
- 4
- Cavity
- T-34A
- Capacity
- 12 - 60 gpm / 45 - 240 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics FSCA, FSDA, FSEA, FSFA flow divider/combiner valve used for?▾
Which sizes and versions does the Sun Hydraulics FSCA, FSDA, FSEA, FSFA flow divider/combiner valve come in?▾
How do I read the Sun Hydraulics model code FSCAXAN for the FSCA, FSDA, FSEA, FSFA flow divider/combiner valve?▾
What is the maximum operating pressure of the Sun Hydraulics FSCA, FSDA, FSEA, FSFA flow divider/combiner valve?▾
What flow capacity does the Sun Hydraulics FSCA, FSDA, FSEA, FSFA flow divider/combiner valve have by series?▾
Which seal materials and body finishes does the Sun Hydraulics FSCA, FSDA, FSEA, FSFA flow divider/combiner valve come with?▾
Which cavity does the Sun Hydraulics FSCA, FSDA, FSEA, FSFA flow divider/combiner valve fit?▾
Which seal kit fits the Sun Hydraulics FSCA, FSDA, FSEA, FSFA flow divider/combiner valve?▾
How is the Sun Hydraulics FSCA, FSDA, FSEA, FSFA flow divider/combiner valve installed?▾
Where is the Sun Hydraulics FSCA, FSDA, FSEA, FSFA flow divider/combiner valve used?▾
Sun Hydraulics FSCA, FSDA, FSEA, FSFA or FSCD, FSDD, FSED, FSFD: what is the difference?▾
Do you stock the Sun Hydraulics FSCA, FSDA, FSEA, FSFA in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








