Sun Hydraulics 2-Way, Direct-Acting, Solenoid-Operated Directional Blocking Poppet Valve with Overlap (740 Series) — DTCF

Sun Hydraulics 2-Way, Direct-Acting, Solenoid-Operated Directional Blocking Poppet Valve with Overlap (740 Series): DTCF, series 1, 6 gpm (23 L/min), T-13A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: 2-Way Direct-Acting Solenoid-Operated Blocking Poppet Valve
- Capacity: 6 gpm (23 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-13A
- Valve function
- 2-Way Direct-Acting Solenoid-Operated Blocking Poppet Valve
- Series (frame sizes)
- 1
- Cavity
- T-13A
Product description
A direct-acting, 2-position poppet valve: the solenoid moves the poppet itself, so it shifts with no minimum pressure, and it blocks in both directions with very low leakage.
This version
- Uses Sun's 740 Series coils, or 747 Series coils for hazardous locations.
- Overlap design: a combined seat and spool stops the small pass of oil that many poppet valves let through when the pressure across them changes suddenly.
Sizes and cavities
Sun Hydraulics builds this valve in one version:
- DTCF — series 1, T-13A cavity, 6 gpm (23 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 10 drops/min.@5000 psi (0,7 cc/min.@350 bar)
- Typical response time: 50 ms
- Switching frequency: 15,000 max. cycles/hr
Configuration options
The letters after the base model code choose these options (shown for DTCF; a size may add or drop a choice):
- Control: D — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override, T — Twist (Momentary) Manual Override, X — No Manual Override
- Spool / poppet configuration: C — Normally Closed
- Seal material: N — Buna-N, V — Viton, E — EPDM
- Coil: 46 coil choices, or no coil — 12 VDC, 14 VDC, 24 VDC, 28 VDC, 115 VAC, 230 VAC; connections include DIN 43650-Form A, AMP Junior Timer, Twin Lead, Metri-Pack, Deutsch DT04-2P, Explosion Proof
Option rules: If the coil is in this group (211, 212, 212D, 214, 214D, 223, 224, 224D, 228, 228D, 612, 612D, 614, 614D, 624, 624D, 628, 628D, 712, 712D, 714, 714D, 724, 724D, 728, 728D, 812, 812D, 814, 814D, 824, 824D, 828, 828D, 912, 912D, 914, 914D, 924, 924D, 928, 928D, JM24BD, JM24CD, JN24BD, JN24CD), the range must be C; If the coil is in this group (JM24BD, JM24CD, JN24BD, JN24CD), the control must be M or X; If the seal is E, the control must be M or X.
Selection notes
- Normally closed versions close if power fails, which suits load-holding duty.
- The solenoid tube is fatigue-rated for 5,000 psi (350 bar).
Where it is used
Load holding, pilot control of larger valves, isolating accumulators and gauges.
Installation and seal kits
Hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990413007, Polyurethane: 990413002, Viton: 990413006. Coil seal and nut kit: Viton: 990740006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DTCFXCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | 2-Way Direct-Acting Solenoid-Operated Blocking Poppet Valve |
| Series (frame sizes) | 1 |
| Cavity | T-13A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 6 gpm (23 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Max leakage | 10 drops/min.@5000 psi (0,7 cc/min.@350 bar) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | D — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override, T — Twist (Momentary) Manual Override, X — No Manual Override; C — Normally Closed |
| Seal material | N — Buna-N, V — Viton, E — EPDM |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm) |
| Seal kits | series 1: Buna: 990413007, Polyurethane: 990413002, Viton: 990413006 |
| Weight | .50 lb (0,25 kg) |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.DTCF
- Series
- 1
- Cavity
- T-13A
- Capacity
- 6 gpm / 23 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun DTCF 2-way direct-acting solenoid-operated blocking poppet valve and what does it do?▾
How do I read the Sun DTCF 2-way direct-acting solenoid-operated blocking poppet valve model code and its option letters?▾
What flow, series and cavity does the Sun DTCF 2-way direct-acting solenoid-operated blocking poppet valve have?▾
How is the Sun DTCF 2-way direct-acting solenoid-operated blocking poppet valve configured, and what should I check before choosing it?▾
What pressure, leakage and response ratings does the Sun DTCF 2-way direct-acting solenoid-operated blocking poppet valve have?▾
What seal materials and coil voltages does the Sun DTCF 2-way direct-acting solenoid-operated blocking poppet valve offer?▾
Which cavity does the Sun DTCF 2-way direct-acting solenoid-operated blocking poppet valve fit?▾
Does the Sun DTCF 2-way direct-acting solenoid-operated blocking poppet valve come with a coil, and what do I need to run it?▾
What torque and seal kits apply to the Sun DTCF 2-way direct-acting solenoid-operated blocking poppet valve?▾
Where is the Sun DTCF 2-way direct-acting solenoid-operated blocking poppet valve used?▾
How does the Sun DTCF 2-way direct-acting solenoid-operated blocking poppet valve differ from the Sun DTCA?▾
Can I buy the Sun DTCF 2-way direct-acting solenoid-operated blocking poppet valve from stock in the UAE and get a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Hammerverschraubung Typ 740
- fr
- union à marteau type 740
- es
- unión de martillo tipo 740
- it
- giunto a martello tipo 740








