Skip to content
SUN HYDRAULICSIH-SUN-DBAF

Sun Hydraulics 3-Way Solenoid-Operated Directional Spool Valve, Pilot Capacity (740 Series) — DBAF

Solenoid Cartridge ValvesEx-stock · delivery in 3 days
Sun Hydraulics DBAF 3-way solenoid-operated directional spool valve, series P, T-9A cavity — dimension drawing
VIEW 01·Sun Hydraulics DBAF 3-way solenoid-operated directional spool valve, series P, T-9A cavity — dimension drawing
1 / 3

Sun Hydraulics 3-Way Solenoid-Operated Directional Spool Valve, Pilot Capacity (740 Series): DBAF, series P, .25 gpm (1 L/min), T-9A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: 3-Way Solenoid-Operated Directional Spool Valve
  • Capacity: .25 gpm (1 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-9A
Valve function
3-Way Solenoid-Operated Directional Spool Valve
Series (frame sizes)
P
Cavity
T-9A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A direct-acting, balanced-spool 3-way, 2-position valve. It switches a common port between two others with no minimum pressure, and its flow paths work in both directions.

This version

  • Uses Sun's 740 Series coils, or 747 Series coils for hazardous locations.
  • Pilot capacity: sized to switch pilot flows to larger valves, not main flows.

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • DBAF — series P, T-9A cavity, .25 gpm (1 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series. Series P parts are pilot cartridges for the small T-8A and T-9A pilot cavities, many of which sit in the end of a larger Sun main stage.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 10 drops/min.@5000 psi (0,7 cc/min.@350 bar)
  • Typical response time: 50 ms
  • Switching frequency: 15,000 max. cycles/hr

Configuration options

The letters after the base model code choose these options (shown for DBAF; a size may add or drop a choice):

  • Control: D — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override (Standard), T — Twist (Momentary) Manual Override, X — No Manual Override
  • Spool / poppet configuration: C — Normally Closed, H — Normally Open
  • Seal material: N — Buna-N, V — Viton, E — EPDM
  • Coil: 100 coil choices, or no coil — 12 VDC, 14 VDC, 24 VDC, 28 VDC, 115 VAC, 230 VAC; connections include DIN 43650-Form A, AMP Junior Timer, Twin Lead, Metri-Pack, Deutsch DT04-2P, Explosion Proof

Option rules: If the coil is in this group (211, 211L, 212, 212D, 212L, 212LD, 214, 214D, 214L, 214LD, 223, 223L, 224, 224D, 224L, 224LD, 228, 228D, 228L, 228LD, 612, 612D, 612L, 612LD, 614, 614D, 614L, 614LD, 624, 624D, 624L, 624LD, 628, 628D, 628L, 628LD, 712, 712D, 712L, 712LD, 714, 714D, 714L, 714LD, 724, 724D, 724L, 724LD, 728, 728D, 728L, 728LD, 812, 812D, 812L, 812LD, 814, 814D, 814L, 814LD, 824, 824D, 824L, 824LD, 828, 828D, 828L, 828LD, 912, 912D, 912L, 912LD, 914, 914D, 914L, 914LD, 924, 924D, 924L, 924LD, 928, 928D, 928L, 928LD, JM24BD, JM24CD, JN24BD, JN24CD), the range must be C or H; If the coil is in this group (JM24BD, JM24CD, JN24BD, JN24CD), the control must be M or X; If the seal is E, the control must be M or X.

Selection notes

  • The pilot-capacity versions are sized to pilot other valves and leak under 10 drops a minute at 5,000 psi.
  • The solenoid tube is fatigue-rated for 5,000 psi (350 bar) unless the title gives a lower rating.

Where it is used

Single-acting cylinders, pilot signals to logic elements and main stages, selecting between two pressures.

Installation and seal kits

Hex 7/8 in. (22,2 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm). Replacement seal kits — series P: Buna: 990009007, EPDM: 990009014, Polyurethane: 990009002, Viton: 990009006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DBAFXHN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Performance

ParameterValue
Capacity.25 gpm (1 L/min)
Max operating pressure5000 psi (350 bar)
Max leakage10 drops/min.@5000 psi (0,7 cc/min.@350 bar)

Identification

ParameterValue
Valve function3-Way Solenoid-Operated Directional Spool Valve
Series (frame sizes)P
CavityT-9A

Configuration

ParameterValue
Control / adjustmentD — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override (Standard), T — Twist (Momentary) Manual Override, X — No Manual Override; C — Normally Closed, H — Normally Open
Seal materialN — Buna-N, V — Viton, E — EPDM

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque20 - 25 lbf ft (27 - 33 Nm)
Seal kitsseries P: Buna: 990009007, EPDM: 990009014, Polyurethane: 990009002, Viton: 990009006

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de
Hammerverschraubung Typ 740
fr
union à marteau type 740
es
unión de martillo tipo 740
it
giunto a martello tipo 740
RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at