Skip to content
SUN HYDRAULICSIH-SUN-DACC

Sun Hydraulics 2-Way, 2-Stage, Solenoid-Operated Directional Poppet Valve — DACC

Solenoid Cartridge ValvesEx-stock · delivery in 3 days
Sun Hydraulics DACC 2-way 2-stage solenoid-operated poppet valve, series 1, T-13A cavity — dimension drawing
VIEW 01·Sun Hydraulics DACC 2-way 2-stage solenoid-operated poppet valve, series 1, T-13A cavity — dimension drawing
1 / 3

Sun Hydraulics 2-Way, 2-Stage, Solenoid-Operated Directional Poppet Valve: DACC, series 1, 15 gpm (60 L/min), T-13A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: 2-Way 2-Stage Solenoid-Operated Poppet Valve
  • Capacity: 15 gpm (60 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-13A
Valve function
2-Way 2-Stage Solenoid-Operated Poppet Valve
Series (frame sizes)
1
Cavity
T-13A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A pilot-operated, 2-position poppet valve: the solenoid opens a small pilot, and system pressure moves the main poppet, so a small coil switches a large flow. A reverse free-flow check lets oil pass the other way when it is closed. Poppet seating gives very low leakage — under 10 drops a minute at 5,000 psi.

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • DACC — series 1, T-13A cavity, 15 gpm (60 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 10 drops/min.@5000 psi (0,7 cc/min.@350 bar)
  • Typical response time: 30 ms
  • Switching frequency: 15,000 max. cycles/hr
  • Check cracking pressure: 50 psi (3,5 bar)

Configuration options

The letters after the base model code choose these options (shown for DACC; a size may add or drop a choice):

  • Control: C — Concealed Manual Override, M — Manual Override
  • Spool / poppet configuration: C — Normally Closed, H — Normally Open
  • Seal material: N — Buna-N, V — Viton, E — EPDM
  • Coil: 7 coil choices, or no coil — 12 VDC, 24 VDC, 115 VAC, 230 VAC; connections include DIN 43650-Form A, NFPA

Option rules: If the seal is E, the control must be C or M.

Selection notes

  • Normally open or normally closed, chosen in the code.
  • The solenoid tube is fatigue-rated for 5,000 psi (350 bar).

Where it is used

Load holding and high-flow on/off functions — lowering valves, accumulator isolation, unloading.

Installation and seal kits

Hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990310007, EPDM: 990313014, Viton: 990310006. Coil seal and nut kit: Viton: 990760006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DACCMCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve function2-Way 2-Stage Solenoid-Operated Poppet Valve
Series (frame sizes)1
CavityT-13A

Performance

ParameterValue
Capacity15 gpm (60 L/min)
Max operating pressure5000 psi (350 bar)
Max leakage10 drops/min.@5000 psi (0,7 cc/min.@350 bar)

Configuration

ParameterValue
Control / adjustmentC — Concealed Manual Override, M — Manual Override; C — Normally Closed, H — Normally Open
Seal materialN — Buna-N, V — Viton, E — EPDM

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm)
Seal kitsseries 1: Buna: 990310007, EPDM: 990313014, Viton: 990310006
Weight.40 lb (0,20 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at