Skip to content
SUN HYDRAULICSIH-SUN-DWBF

Sun Hydraulics FLeX Series 3-Way, Direct-Acting, Solenoid-Operated Directional Blocking Poppet Valve — DWBF

Solenoid Cartridge ValvesEx-stock · delivery in 3 days
Sun Hydraulics DWBF 3-way direct-acting solenoid-operated poppet valve, series 0, T-150A cavity — dimension drawing
VIEW 01·Sun Hydraulics DWBF 3-way direct-acting solenoid-operated poppet valve, series 0, T-150A cavity — dimension drawing
1 / 3

Sun Hydraulics FLeX Series 3-Way, Direct-Acting, Solenoid-Operated Directional Blocking Poppet Valve: DWBF, series 0, 6 gpm (23 L/min), T-150A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: 3-Way Direct-Acting Solenoid-Operated Poppet Valve
  • Capacity: 6 gpm (23 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-150A
Valve function
3-Way Direct-Acting Solenoid-Operated Poppet Valve
Series (frame sizes)
0
Cavity
T-150A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A direct-acting, poppet-type 3-way, 2-position valve. The poppet seals with very low leakage, and it shifts with no minimum pressure.

This version

  • FLeX Series: tested to 10 million cycles at full rated pressure and zinc-nickel plated as standard for 1,000 hours of salt-fog protection.

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • DWBF — series 0, T-150A cavity, 6 gpm (23 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 0.004 in³/min.@5000 psi (0,07 cc/min.@350 bar)
  • Typical response time: 50 ms
  • Switching frequency: 10,000 max. cycles/hr

Configuration options

The letters after the base model code choose these options (shown for DWBF; a size may add or drop a choice):

  • Control: D — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override, T — Twist (Momentary) Manual Override, X — No Manual Override
  • Spool / poppet configuration: A — Normally Open 1 to 2, Closed 2 to 3, N — Normally Open 2 to 3, Closed 1 to 2
  • Seal material: L — Extended Temp. Buna, N — Buna-N, V — Viton, E — EPDM
  • Coil: 47 coil choices, or no coil — 12 VDC, 14 VDC, 24 VDC, 28 VDC, 115 VAC, 230 VAC; connections include DIN 43650-Form A, AMP Junior Timer, Twin Lead, Metri-Pack, Deutsch DT04-2P, Explosion Proof

Selection notes

  • Normally closed versions close if power fails, which suits load-holding duty.
  • Port 3 is the preferred inlet; with the inlet at port 1 capacity is about half.

Where it is used

Single-acting cylinders and pilot circuits that must hold pressure without leakage.

Installation and seal kits

Hex 3/4 in. (19,1 mm); installation torque 25 - 30 lbf ft (35 - 40 Nm). Replacement seal kits — series 0: Buna: 990150007, Viton: 990150006. Coil seal and nut kit: Viton: 990740006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DWBFXNN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve function3-Way Direct-Acting Solenoid-Operated Poppet Valve
Series (frame sizes)0
CavityT-150A

Performance

ParameterValue
Capacity6 gpm (23 L/min)
Max operating pressure5000 psi (350 bar)
Max leakage0.004 in³/min.@5000 psi (0,07 cc/min.@350 bar)

Configuration

ParameterValue
Control / adjustmentD — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override, T — Twist (Momentary) Manual Override, X — No Manual Override; A — Normally Open 1 to 2, Closed 2 to 3, N — Normally Open 2 to 3, Closed 1 to 2
Seal materialL — Extended Temp. Buna, N — Buna-N, V — Viton, E — EPDM

Installation

ParameterValue
Valve hex size3/4 in. (19,1 mm)
Installation torque25 - 30 lbf ft (35 - 40 Nm)
Seal kitsseries 0: Buna: 990150007, Viton: 990150006
Weight1.25 lb (0,60 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at