Sun Hydraulics 2-Way, Solenoid-Operated Directional Poppet Valve, After Check — HDDA

Sun Hydraulics 2-Way, Solenoid-Operated Directional Poppet Valve, After Check: HDDA, series 1, 10 gpm (40 L/min), T-11A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: 2-Way Solenoid-Operated Poppet Valve
- Capacity: 10 gpm (40 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-11A
- Valve function
- 2-Way Solenoid-Operated Poppet Valve
- Series (frame sizes)
- 1
- Cavity
- T-11A
Product description
A 2-way, 2-position poppet valve operated by a solenoid, for on/off control of a single flow path. The version in each listing sets how it is piloted and whether a check is built in.
This version
- A check lets oil into the system from port 2 to port 1; the solenoid poppet, teed in after the check, lets it back out to port 3. A compact lift-and-lower valve that can be built into the actuator.
Sizes and cavities
Sun Hydraulics builds this valve in one version:
- HDDA — series 1, T-11A cavity, 10 gpm (40 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 10 drops/min.@5000 psi (0,7 cc/min.@350 bar)
- Typical response time: 50 ms
- Switching frequency: 15,000 max. cycles/hr
- Check cracking pressure: 30 psi (2 bar)
Configuration options
The letters after the base model code choose these options (shown for HDDA; a size may add or drop a choice):
- Control: D — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override, T — Twist (Momentary) Manual Override, X — No Manual Override
- Spool / poppet configuration: C — Normally Closed
- Seal material: N — Buna-N, V — Viton
- Coil: 19 coil choices, or no coil — 12 VDC, 14 VDC, 24 VDC, 115 VAC, 230 VAC; connections include DIN 43650-Form A, Deutsch DT04-6P, Metri-Pack, Deutsch DT04-2P, Explosion Proof, with embedded driver
Option rules: If the coil is in this group (HN24AA, HN24AB), the control must be M or X.
Selection notes
- Normally open or normally closed, chosen in the code.
- The solenoid tube is fatigue-rated for 5,000 psi (350 bar).
Where it is used
On/off and lift-and-lower functions on mobile machines and power units.
Installation and seal kits
Hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006. Coil seal and nut kit: Viton: 990770006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example HDDAXCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Performance
| Parameter | Value |
|---|---|
| Capacity | 10 gpm (40 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Max leakage | 10 drops/min.@5000 psi (0,7 cc/min.@350 bar) |
Identification
| Parameter | Value |
|---|---|
| Valve function | 2-Way Solenoid-Operated Poppet Valve |
| Series (frame sizes) | 1 |
| Cavity | T-11A |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | D — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override, T — Twist (Momentary) Manual Override, X — No Manual Override; C — Normally Closed |
| Seal material | N — Buna-N, V — Viton |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm) |
| Seal kits | series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006 |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.HDDA
- Series
- 1
- Cavity
- T-11A
- Capacity
- 10 gpm / 40 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun HDDA 2-way solenoid-operated poppet valve and what does it do?▾
How do I read the Sun HDDA 2-way solenoid-operated poppet valve model code and its option letters?▾
What flow, series and cavity does the Sun HDDA 2-way solenoid-operated poppet valve have?▾
How is the Sun HDDA 2-way solenoid-operated poppet valve configured, and what should I check before choosing it?▾
What pressure, leakage and response ratings does the Sun HDDA 2-way solenoid-operated poppet valve have?▾
What seal materials and coil voltages does the Sun HDDA 2-way solenoid-operated poppet valve offer?▾
Which cavity does the Sun HDDA 2-way solenoid-operated poppet valve fit?▾
Does the Sun HDDA 2-way solenoid-operated poppet valve come with a coil, and what do I need to run it?▾
What torque and seal kits apply to the Sun HDDA 2-way solenoid-operated poppet valve?▾
Where is the Sun HDDA 2-way solenoid-operated poppet valve used?▾
How does the Sun HDDA 2-way solenoid-operated poppet valve differ from the Sun DGTA?▾
Do you stock the Sun HDDA 2-way solenoid-operated poppet valve in Dubai for export?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








