Skip to content
SUN HYDRAULICSIH-SUN-CXAA

Sun Hydraulics Free Flow Nose to Side Check Valve, Pilot Capacity — CXAA

Check, Shuttle & Directional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics CXAA free-flow nose-to-side check valve, series P, T-8A cavity — dimension drawing
VIEW 01·Sun Hydraulics CXAA free-flow nose-to-side check valve, series P, T-8A cavity — dimension drawing
1 / 3

Sun Hydraulics Free Flow Nose to Side Check Valve, Pilot Capacity: CXAA, series P, 5 gpm (20 L/min), T-8A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Free-Flow Nose-to-Side Check Valve
  • Capacity: 5 gpm (20 L/min)
  • Cavity: T-8A
Valve function
Free-Flow Nose-to-Side Check Valve
Series (frame sizes)
P
Cavity
T-8A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A screw-in check cartridge that lets oil flow freely from the nose (port 1) out of the side (port 2) and seals against flow the other way. A hardened, lapped poppet gives near-zero leakage, and both ports are rated for 5,000 psi (350 bar).

This version

  • Pilot capacity: sized to switch pilot flows to larger valves, not main flows.

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • CXAA — series P, T-8A cavity, 5 gpm (20 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series. Series P parts are pilot cartridges for the small T-8A and T-9A pilot cavities, many of which sit in the end of a larger Sun main stage.

Configuration options

The letters after the base model code choose these options (shown for CXAA; a size may add or drop a choice):

  • Control: X — Not Adjustable
  • Check cracking pressure: B — 15 psi (1 bar), F — 100 psi (7 bar), Z — 1 psi (0,07 bar)
  • Seal material: L — Extended Temp. Buna, N — Buna-N, V — Viton, E — EPDM
  • Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Option rules: EPDM seals are not allowed on modifier /LH; If the modifier is /AP, the control must be X; If the modifier is /LH, the control must be X; If the seal is E, the control must be X.

Selection notes

  • Floating construction keeps the poppet free even if the cartridge is over-torqued or the cavity is slightly out.
  • EPDM seals are for phosphate-ester fluids only; petroleum oils and greases attack them.

Where it is used

Pump outlet checks, load-holding checks in a manifold, isolating one branch of a circuit from another.

Installation and seal kits

Hex 7/8 in. (22,2 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm). Replacement seal kits — series P: Buna: 990608007, EPDM: 990608014, Viton: 990608006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CXAAXBN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionFree-Flow Nose-to-Side Check Valve
Series (frame sizes)P
CavityT-8A

Configuration

ParameterValue
Control / adjustmentX — Not Adjustable
Seal materialL — Extended Temp. Buna, N — Buna-N, V — Viton, E — EPDM
Material / coating/AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque20 - 25 lbf ft (27 - 33 Nm)
Seal kitsseries P: Buna: 990608007, EPDM: 990608014, Viton: 990608006
Weight.10 lb (0,5 kg)

Performance

ParameterValue
Capacity5 gpm (20 L/min)
Setting rangeB — 15 psi (1 bar), F — 100 psi (7 bar), Z — 1 psi (0,07 bar)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at