Sun Hydraulics Flush Mount, Free Flow Nose to Side Check Valve — CXBG

Sun Hydraulics Flush Mount, Free Flow Nose to Side Check Valve: CXBG, series 0, 10 gpm (40 L/min), T-162A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Free-Flow Nose-to-Side Check Valve
- Capacity: 10 gpm (40 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-162A
- Valve function
- Free-Flow Nose-to-Side Check Valve
- Series (frame sizes)
- 0
- Cavity
- T-162A
Product description
A screw-in check cartridge that lets oil flow freely from the nose (port 1) out of the side (port 2) and seals against flow the other way. A hardened, lapped poppet gives near-zero leakage, and both ports are rated for 5,000 psi (350 bar).
This version
- Flush-mount body: sits level with the manifold face for a small footprint.
Sizes and cavities
Sun Hydraulics builds this valve in one version:
- CXBG — series 0, T-162A cavity, 10 gpm (40 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 1 drops/min. (0,07 cc/min)
Configuration options
The letters after the base model code choose these options (shown for CXBG; a size may add or drop a choice):
- Control: X — Not Adjustable
- Check cracking pressure: A — 4 psi (0,3 bar), B — 15 psi (1 bar), C — 30 psi (2 bar), D — 50 psi (3,5 bar)
- Seal material: L — Extended Temp. Buna, N — Buna-N, V — Viton, E — EPDM
- Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel
Option rules: EPDM seals are not allowed on modifier /AP or /LH; If the modifier is /AP, the control must be X; If the modifier is /LH, the control must be X; If the seal is E, the control must be X.
Selection notes
- Floating construction keeps the poppet free even if the cartridge is over-torqued or the cavity is slightly out.
- EPDM seals are for phosphate-ester fluids only; petroleum oils and greases attack them.
Where it is used
Pump outlet checks, load-holding checks in a manifold, isolating one branch of a circuit from another.
Installation and seal kits
Replacement seal kits — series 0: Buna: 990162007, Polyurethane: 990162002, Viton: 990162006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CXBGXAN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Performance
| Parameter | Value |
|---|---|
| Capacity | 10 gpm (40 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | A — 4 psi (0,3 bar), B — 15 psi (1 bar), C — 30 psi (2 bar), D — 50 psi (3,5 bar) |
| Max leakage | 1 drops/min. (0,07 cc/min) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — Not Adjustable |
| Seal material | L — Extended Temp. Buna, N — Buna-N, V — Viton, E — EPDM |
| Material / coating | /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel |
Identification
| Parameter | Value |
|---|---|
| Valve function | Free-Flow Nose-to-Side Check Valve |
| Series (frame sizes) | 0 |
| Cavity | T-162A |
Installation
| Parameter | Value |
|---|---|
| Installation torque | 20 - 25 lbf ft (27 - 33 Nm) |
| Seal kits | series 0: Buna: 990162007, Polyurethane: 990162002, Viton: 990162006 |
| Weight | .20 lb (0,10 kg) |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.CXBG
- Series
- 0
- Cavity
- T-162A
- Capacity
- 10 gpm / 40 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics CXBG free-flow nose-to-side check valve used for?▾
Which sizes and versions does the Sun Hydraulics CXBG free-flow nose-to-side check valve come in?▾
How do I read the Sun Hydraulics model code CXBGXAN for the CXBG free-flow nose-to-side check valve?▾
What is the maximum operating pressure of the Sun Hydraulics CXBG free-flow nose-to-side check valve?▾
What flow capacity does the CXBG free-flow nose-to-side check valve have?▾
Which seal materials and body finishes does the Sun Hydraulics CXBG free-flow nose-to-side check valve come with?▾
Which cavity does the Sun Hydraulics CXBG free-flow nose-to-side check valve fit?▾
Which seal kit fits the Sun Hydraulics CXBG free-flow nose-to-side check valve?▾
How is the Sun Hydraulics CXBG free-flow nose-to-side check valve installed?▾
Where is the Sun Hydraulics CXBG free-flow nose-to-side check valve used?▾
Sun Hydraulics CXBG or CXBM: what is the difference?▾
Do you stock the Sun Hydraulics CXBG in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








