Sun Hydraulics Back-to-Back Check/Shuttle Valve with Signal at Port 2 — CDAC, CDAD, Series 1

Sun Hydraulics Back-to-Back Check/Shuttle Valve with Signal at Port 2: CDAC, CDAD, series 1, 2.5 gpm (10 L/min), T-13A, T-11A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Back-to-Back Check / Shuttle Valve
- Capacity: 2.5 gpm (10 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-13A, T-11A
- Valve function
- Back-to-Back Check / Shuttle Valve
- Series (frame sizes)
- 1
- Cavity
- T-13A, T-11A
Product description
Two checks back to back in one cartridge, connecting the higher of two work ports to a common signal port. Hardened, lapped, guided poppets on a lightly stressed spring give very low leakage and long life.
Sizes and cavities
Sun Hydraulics builds this valve in 2 versions:
- CDAC — series 1, T-13A cavity, 2.5 gpm (10 L/min)
- CDAD — series 1, T-11A cavity, 2.5 gpm (10 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 5 drops/min. (0,3 cc/min)
Configuration options
The letters after the base model code choose these options (shown for CDAD; a size may add or drop a choice):
- Control: X — Not Adjustable
- Check cracking pressure: B — 15 psi (1 bar)
- Seal material: L — Extended Temp. Buna, N — Buna-N, V — Viton
- Material / coating: /AP — Stainless Steel, Passivated
Option rules: EPDM seals are not allowed on modifier /AP; If the modifier is /AP, the control must be X.
Selection notes
- It holds the highest pressure it has seen: if the load ports fall, the signal stays trapped, so the circuit needs a way to bleed it.
- Floating construction keeps the poppets free if the cartridge is over-torqued.
Where it is used
Load-sensing and pilot circuits where the signal must not leak away between strokes.
Installation and seal kits
Hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990010007, Polyurethane: 990010002, Viton: 990010006, Buna: 990011007, Polyurethane: 990011002, Viton: 990011006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CDADXBN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Back-to-Back Check / Shuttle Valve |
| Series (frame sizes) | 1 |
| Cavity | T-13A, T-11A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 2.5 gpm (10 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | B — 15 psi (1 bar) |
| Max leakage | 5 drops/min. (0,3 cc/min) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — Not Adjustable |
| Seal material | L — Extended Temp. Buna, N — Buna-N, V — Viton |
| Material / coating | /AP — Stainless Steel, Passivated |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm) |
| Seal kits | series 1: Buna: 990010007, Polyurethane: 990010002, Viton: 990010006, Buna: 990011007, Polyurethane: 990011002, Viton: 990011006 |
| Weight | .30 lb (0,15 kg) |
Shipping & lead time
Sizes & part numbers
2 sizes- Sun Hydraulics part no.CDAC
- Series
- 1
- Cavity
- T-13A
- Capacity
- 2.5 gpm / 10 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.CDAD
- Series
- 1
- Cavity
- T-11A
- Capacity
- 2.5 gpm / 10 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics CDAC, CDAD back-to-back check / shuttle valve used for?▾
Which sizes and versions does the Sun Hydraulics CDAC, CDAD back-to-back check / shuttle valve come in?▾
How do I read the Sun Hydraulics model code CDADXBN for the CDAC, CDAD back-to-back check / shuttle valve?▾
What is the maximum operating pressure of the Sun Hydraulics CDAC, CDAD back-to-back check / shuttle valve?▾
What flow capacity does the Sun Hydraulics CDAC, CDAD back-to-back check / shuttle valve have by series?▾
Which seal materials and body finishes does the Sun Hydraulics CDAC, CDAD back-to-back check / shuttle valve come with?▾
Which cavity does the Sun Hydraulics CDAC, CDAD back-to-back check / shuttle valve fit?▾
Which seal kit fits the Sun Hydraulics CDAC, CDAD back-to-back check / shuttle valve?▾
How is the Sun Hydraulics CDAC, CDAD back-to-back check / shuttle valve installed?▾
Where is the Sun Hydraulics CDAC, CDAD back-to-back check / shuttle valve used?▾
Sun Hydraulics CDAC, CDAD or CDAA: what is the difference?▾
Do you stock the Sun Hydraulics CDAC, CDAD in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








