Skip to content
SUN HYDRAULICSIH-SUN-DV-O

Sun Hydraulics 3-Way, Vent-to-Operate, Directional Valve with Drain to Port 4 and Integral T-8A Control Cavity (1 Blocked, 2 to 3 Open) — DVBO, DVCO

Check, Shuttle & Directional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics DVBO vent-to-operate directional valve with T-8A pilot cavity, series 1, T-21A cavity — dimension drawing
VIEW 01·Sun Hydraulics DVBO vent-to-operate directional valve with T-8A pilot cavity, series 1, T-21A cavity — dimension drawing
1 / 3

Sun Hydraulics 3-Way, Vent-to-Operate, Directional Valve with Drain to Port 4 and Integral T-8A Control Cavity (1 Blocked, 2 to 3 Open): DVBO, DVCO, series 1 to 2, 7 gpm to 15 gpm (28 L/min to 60 L/min), T-21A, T-22A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Vent-to-Operate Directional Valve with T-8A Pilot Cavity
  • Capacity: 7 gpm to 15 gpm (28 L/min to 60 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-21A, T-22A
Valve function
Vent-to-Operate Directional Valve with T-8A Pilot Cavity
Series (frame sizes)
1 to 2
Cavity
T-21A, T-22A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A directional cartridge with its own T-8A pilot cavity. When the pilot cartridge screwed into that cavity opens and passes a small flow, the main stage shifts. There must be pressure at port 1, relative to port 3, to move it.

This version

  • At rest: 1 blocked; 2 to 3 open.
  • The spring chamber drains to a separate port 4, so pressure at port 3 does not shift the setting and port 3 can work as a load port.
  • A T-8A pilot cavity is machined into the end, so a pilot cartridge screws straight in (ordered separately).

Sizes and cavities

Sun Hydraulics builds this valve in 2 versions:

  • DVBO — series 1, T-21A cavity, 7 gpm (28 L/min)
  • DVCO — series 2, T-22A cavity, 15 gpm (60 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 2 in³/min.@1000 psi (30 cc/min.@70 bar)
  • Control pilot flow: 7 - 10 in³/min. (0,11 - 0,16 L/min)

Configuration options

The letters after the base model code choose these options (shown for DVBO; a size may add or drop a choice):

  • Control: 8 — T-8A Cavity
  • Setting range: F — 100 psi (7 bar)
  • Seal material: N — Buna-N, V — Viton

Selection notes

  • Pressure at port 3 can oppose opening — use a drain-to-port-4 version where port 3 carries load.
  • It can modulate between positions; it is not a snap-acting switch.

Where it is used

Solenoid or manual switching of moderate flows without a separate pilot body or pilot lines.

Installation and seal kits

Hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm). Replacement seal kits — series 1: Buna: 990021007, Polyurethane: 990021002, Viton: 990021006; series 2: Buna: 990022007, EPDM: 990022014, Polyurethane: 990022002, Viton: 990022006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DVBO8FN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm)
Seal kitsseries 1: Buna: 990021007, Polyurethane: 990021002, Viton: 990021006; series 2: Buna: 990022007, EPDM: 990022014, Polyurethane: 990022002, Viton: 990022006
Weight.50 lb (0,25 kg)

Configuration

ParameterValue
Control / adjustment8 — T-8A Cavity
Seal materialN — Buna-N, V — Viton

Identification

ParameterValue
Valve functionVent-to-Operate Directional Valve with T-8A Pilot Cavity
Series (frame sizes)1 to 2
CavityT-21A, T-22A

Performance

ParameterValue
Capacity7 gpm to 15 gpm (28 L/min to 60 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeF — 100 psi (7 bar)
Max leakage2 in³/min.@1000 psi (30 cc/min.@70 bar)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at