Stainless Steel Swage Eye Terminal
Stainless Steel Swage Eye Terminal (European type), in 15 sizes, 2 mm to 26 mm. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel Swage Eye Terminal
- Pattern / standard: European type
- Size range: 2 mm to 26 mm
- Size range
- 2 mm to 26 mm
- Finish
- Polished
Product description
Spelter sockets and swage or swageless terminals that end a wire rope in an eye, jaw, fork or stud. Built to the European pattern. Polished.
Sizes and ratings
15 sizes, 2 mm to 26 mm. Minimum breaking load 800 to 43,000 kg. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Stamping / machining.
Choosing a size
Match the terminal to the rope diameter and construction, and fit it with the method it is made for — poured, pressed or hand-assembled.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Swage Eye Terminal |
| Pattern / standard | European type |
| Sizes | 15 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 2 mm to 26 mm |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 800 to 43,000 kg |
Construction
| Parameter | Value |
|---|---|
| Finish | Polished |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
15 sizes| Indus part no. | Size | Rope size | Min breaking load (kg) | A (mm) | B (mm) | D (mm) | D1 (mm) | L (mm) | L1 (mm) | D2 (mm) | Weight (kg/100 pcs) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| IH-LR-ST-SSSET-2MM | 2 mm | 2 mm | 800 | 3 | 13 | 5.4 | 2.2 | 48.5 | 30 | 5.5 | 0.9 |
| IH-LR-ST-SSSET-2P5MM | 2.5 mm | 2.5 mm | 800 | 3 | 13 | 5.4 | 2.7 | 48.5 | 30 | 5.5 | 0.9 |
| IH-LR-ST-SSSET-3MM | 3 mm | 3 mm | 1,300 | 4 | 14 | 6.5 | 3.3 | 55 | 36 | 6.35 | 1.5 |
| IH-LR-ST-SSSET-4MM | 4 mm | 4 mm | 2,350 | 6 | 18 | 8.5 | 4.3 | 65 | 39 | 7.5 | 2.5 |
| IH-LR-ST-SSSET-5MM | 5 mm | 5 mm | 3,500 | 7 | 22 | 10 | 5.3 | 80 | 50 | 9 | 4.5 |
| IH-LR-ST-SSSET-6MM | 6 mm | 6 mm | 5,600 | 8 | 28 | 12.5 | 6.4 | 94 | 62 | 12.6 | 9.5 |
| IH-LR-ST-SSSET-7MM | 7 mm | 7 mm | 6,200 | 9 | 28 | 12.5 | 7.4 | 105 | 68 | 14.2 | 12.5 |
| IH-LR-ST-SSSET-8MM | 8 mm | 8 mm | 7,600 | 10 | 32 | 14.5 | 8.4 | 124 | 85 | 16 | 18.2 |
| IH-LR-ST-SSSET-10MM | 10 mm | 10 mm | 9,800 | 12 | 36 | 16.4 | 10.5 | 142 | 90 | 18 | 25.2 |
| IH-LR-ST-SSSET-12MM | 12 mm | 12 mm | 13,000 | 16 | 40 | 19.3 | 12.6 | 160 | 105 | 20 | 42.5 |
| IH-LR-ST-SSSET-14MM | 14 mm | 14 mm | 17,000 | 18 | 47 | 23 | 14.7 | 206 | 140 | 25 | 75.5 |
| IH-LR-ST-SSSET-16MM | 16 mm | 16 mm | 24,000 | 20 | 53 | 26 | 16.9 | 232 | 160 | 28 | 102 |
| IH-LR-ST-SSSET-19MM | 19 mm | 19 mm | 27,000 | 25 | 65 | 28.5 | 20 | 302 | 200 | 34.5 | 209 |
| IH-LR-ST-SSSET-22MM | 22 mm | 22 mm | 31,000 | 30 | 70 | 33 | 23.2 | 348 | 230 | 40.5 | 314 |
| IH-LR-ST-SSSET-26MM | 26 mm | 26 mm | 43,000 | 30 | 77 | 36 | 27.5 | 400 | 280 | 46 | 425 |
Size — Nominal size as the manufacturer states it. Rope size — Rope diameter the sheave is made for. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. D1 — Dimension D1 on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. D2 — Dimension D2 on the manufacturer dimension drawing. Weight — Weight of 100 pieces, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What sizes does the stainless steel swage eye terminal come in?▾
What is the difference between an open and a closed spelter socket?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Swageless Eye Terminal
Stainless Steel Swage Jaw Terminal
Stainless Steel Swage Machined Fork Terminal
Stainless Steel Swage Stud Terminal
Stainless Steel Swage Toggle Terminal
Stainless Steel Swage Toggle Terminal U.S. Type (thin-wall)
Stainless Steel Swageless Stud Terminal
