Pilot-Operated Safety Relief Valve, API 526

Pilot-operated safety relief valves to API 520 and 526: 1/2" to 20", Class 150 to 2500, tight seal close to set pressure, unaffected by back pressure, for large sizes and high set pressures.
Key features
- Valve type: Safety relief valve, pilot operated
- Construction: Main valve with pop or modulating pilot
- Design standard: API 520, API 526, ASME VIII, ISO 4126-4
- Size range: 1/2" to 20" (DN15 to DN500)
- Pressure class: ASME Class 150 to 2500 (PN10 to PN420)
- Body material: Carbon steel, alloy steel, stainless steel, duplex, nickel alloys
- End connections: Flanged; threaded, socket-weld or butt-weld on request
- Operation: Pilot operated
- Design standard
- API 520, API 526, ASME VIII, ISO 4126-4
- Pressure class
- ASME Class 150 to 2500 (PN10 to PN420)
- End connections
- Flanged; threaded, socket-weld or butt-weld on request
- Operation
- Pilot operated
- Valve type
- Safety relief valve, pilot operated
Product description
The process fluid itself holds the main valve shut, through a small pilot. As pressure rises towards set point the seating force increases, so the valve stays tight where a spring valve would simmer, and back pressure has no effect on set pressure. Suited to large valves, high set pressures and processes that run close to their relief setting.
A safety relief valve opens automatically when pressure reaches its set point and closes again once it falls, protecting a vessel, line or tank from bursting. It is the last safeguard after the control system, so it is sized to the worst relieving case, set and tested on the bench, and sealed against tampering.
Construction
- Pilot senses system pressure and controls the main disc
- Seating force rises with pressure: tight near set
- Opening pressure unaffected by back pressure
- Pop or modulating pilot; field test connection
Sizes and ratings
Published range: 1/2" to 20" (DN15 to DN500), ASME Class 150 to 2500 (PN10 to PN420), in carbon steel, alloy steel, stainless steel, duplex, nickel alloys. End connections: Flanged; threaded, socket-weld or butt-weld on request. Operation: pilot operated.
Each valve is sized to the relieving case; the data sheet and general arrangement drawing come with the quotation.
Testing and documents
Set-pressure test on the bench, seat-tightness test to API 527 and shell test to ASME requirements, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.
Supply
Pilot-operated relief valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.
Related valves
Other safety and relief valves in the range, for comparison when the duty is not settled yet: High-Temperature Pilot-Operated Safety Valve, Steam, Thermal Relief Valve, Threaded, 1/2" to 1-1/2", Changeover Valve for Twin Safety Valves, Mechanical Interlock, Tank Pressure Relief Valve (Breather), API 2000.
Standards
| Parameter | Value |
|---|---|
| Design standard | API 520, API 526, ASME VIII, ISO 4126-4 |
| Face-to-face / end-to-end | API 526 centre-to-face |
| Pressure testing | Set-pressure test on the bench, seat-tightness test to API 527 and shell test to ASME requirements |
Range
| Parameter | Value |
|---|---|
| Size range | 1/2" to 20" (DN15 to DN500) |
| Pressure class | ASME Class 150 to 2500 (PN10 to PN420) |
| Temperature range | By body and seal material |
Materials
| Parameter | Value |
|---|---|
| Body material | Carbon steel, alloy steel, stainless steel, duplex, nickel alloys |
Construction
| Parameter | Value |
|---|---|
| End connections | Flanged; threaded, socket-weld or butt-weld on request |
| Operation | Pilot operated |
Identification
| Parameter | Value |
|---|---|
| Valve type | Safety relief valve, pilot operated |
| Construction | Main valve with pop or modulating pilot |
Application
| Parameter | Value |
|---|---|
| Typical service | Large-capacity, high set pressure, high back pressure |
Supply
| Parameter | Value |
|---|---|
| Supply | Built to order and supplied from Dubai with material certificates and the test record |
Shipping & lead time
What is the Pilot-Operated Safety Relief Valve, API 526 and what is it used for?▾
What is the difference between a pop and a modulating pilot on the pilot-operated safety relief valve?▾
What sizes and pressure classes does the Pilot-Operated Safety Relief Valve, API 526 cover?▾
When should I choose a pilot-operated safety relief valve?▾
What pressure and temperature range does the Pilot-Operated Safety Relief Valve, API 526 work in?▾
What body materials does the Pilot-Operated Safety Relief Valve, API 526 come in?▾
Which standards apply to the Pilot-Operated Safety Relief Valve, API 526, and how is it tested?▾
What end connections and operation does the Pilot-Operated Safety Relief Valve, API 526 have?▾
How do I keep a pilot-operated safety relief valve reliable?▾
How does the pilot-operated valve differ from the conventional safety relief valve?▾
What documents come with the Pilot-Operated Safety Relief Valve, API 526, and can you supply against a project specification?▾
How is the Pilot-Operated Safety Relief Valve, API 526 supplied, and how long does it take?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








