SAE Code 61 Flange Head Crimp Fitting for Braided Hose
SAE Code 61 Flange Head crimp hose fitting for braided hydraulic hose (1SN · 2SN · R1AT · R2AT · R16 · R17). Indus-branded equivalent of the Parker 11543 series, in 11 sizes from -08.
Key features
- Flange Type: Hose fitting flange head
- SAE J518 Code: Code 61
- Configuration: straight
- Nominal Size Range: -08 to -32
- Flange Type
- Hose fitting flange head
- SAE J518 Code
- Code 61
- Configuration
- straight
- Nominal Size Range
- -08 to -32
Product description
The SAE Code 61 Flange Head Crimp Fitting for Braided Hose is a one-piece crimp hose fitting for braided hydraulic hose — EN 853 1SN and 2SN, and SAE 100R1AT, 100R2AT, 100R16 and 100R17. It is supplied under the Indus Hydraulics brand and is dimensionally interchangeable with the Parker 11543 series.
Construction
- Configuration: straight
- Sealing form: Flat flange face with O-ring groove
- Flange: SAE J518 Code 61
- Material: carbon steel, zinc-plated and Cr3+ passivated (316 stainless on request)
Hose compatibility
Crimps onto EN 853 1SN and 2SN, and SAE 100R1AT, 100R2AT, 100R16 and 100R17. Pair it with the matching Indus crimp ferrule for the hose grade — the ferrule, not the fitting, is what changes between hose constructions. The assembly's pressure rating is set by the hose grade and bore, not by this fitting.
Parker equivalence
This listing replaces the Parker 11543 series. Individual sizes are listed below with our part number alongside the Parker number they replace, so you can order from an existing bill of materials without re-specifying.
Sizes
11 sizes, hose bore -08 to -32. Full size and dimension table on this page.
How to order
Quote the Indus part number for the size you need, or send us the Parker number and we will cross it. Tell us the hose grade and bore and we will include the matching ferrule. Indus crimps and pressure-tests assemblies before dispatch — send the overall length and both end fittings on the RFQ.
Identification
| Parameter | Value |
|---|---|
| Flange Type | Hose fitting flange head |
| SAE J518 Code | Code 61 |
| Configuration | straight |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | -08 to -32 |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (316 stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J518 Code 61, ISO 6162-1 |
Compatibility
| Parameter | Value |
|---|---|
| Hose Compatibility | EN 853 1SN and 2SN, and SAE 100R1AT, 100R2AT, 100R16 and 100R17 |
| Parker Series Equivalent | 11543 |
Shipping & lead time
Sizes & part numbers
13 sizesEquivalent to Parker 11543. Every size below prints its equivalent part number beside ours — quote either.
| Indus part no. | Parker equivalent | Hose bore | Flange size | A (mm) | B (mm) | F (mm) |
|---|---|---|---|---|---|---|
| IH-CF43-C61-0808 | 11543-8-8 | -08 · 1/2" · DN12 | 1/2" | 76 | 45 | 30.1 |
| IH-CF43-C61-0812 | 11543-12-8 | -08 · 1/2" · DN12 | 3/4" | 76 | 45 | 38.1 |
| IH-CF43-C61-1212 | 11543-12-12 | -12 · 3/4" · DN20 | 3/4" | 84 | 45 | 38.1 |
| IH-CF43-C61-1216 | 11543-16-12 | -12 · 3/4" · DN20 | 1" | 80 | 41 | 44.4 |
| IH-CF43-C61-1616 | 11543-16-16 | -16 · 1" · DN25 | 1" | 101 | 56 | 44.4 |
| IH-CF43-C61-1620 | 11543-20-16 | -16 · 1" · DN25 | 1.1/4" | 99 | 54 | 50.8 |
| IH-CF43-C61-2020 | 11543-20-20 | -20 · 1.1/4" · DN32 | 1.1/4" | 110 | 63 | 50.8 |
| IH-CF43-C61-2024 | 11543-24-20 | -20 · 1.1/4" · DN32 | 1.1/2" | 116 | 69 | 60.3 |
| IH-CF43-C61-2424 | 11543-24-24 | -24 · 1.1/2" · DN40 | 1.1/2" | 131 | 72 | 60.3 |
| IH-CF43-C61-2432 | 11543-32-24 | -24 · 1.1/2" · DN40 | 2" | 138 | 79 | 71.4 |
| IH-CF43-C61-3232 | 11543-32-32 | -32 · 2" · DN50 | 2" | 150 | 79 | 71.4 |
| IH-CF43-C61-2032 | — | -20 · 1.1/4" | 2" | — | — | — |
| IH-CF43-C61-3224 | — | -32 · 2" | 1.1/2" | — | — | — |
A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
Indus Hydraulics is not affiliated with Parker. Parker part numbers are shown for cross-reference only, so you can order from an existing bill of materials.
This listing is matched size by size to the series below. The size table gives the exact equivalent part number for every Indus part number.
| Maker / standard | Series | Sizes matched |
|---|---|---|
| Parker | 11543 | 11 |
The following competitor part numbers are compatible with or superseded by this SKU. Click through to the dedicated replacement page for each.
Which Parker part number does this replace?▾
Which hoses does this fitting crimp onto?▾
What sizes are available?▾
What is the sealing form?▾
What is the maximum working pressure?▾
Which ferrule pairs with this fitting?▾
Is stainless steel available?▾
Can Indus crimp the assembly?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- SAE-Flansch Flansch SAE
- fr
- bride SAE bride SAE
- es
- brida SAE brida SAE
- it
- flangia SAE flangia SAE
From the blog
Written about this part
Assembly, crimping & certification
Braided against spiral hose fittings: why the same thread comes in two crimp series
A JIC female swivel for 2SN and a JIC female swivel for 4SP look alike and are different parts. Which hoses each series fits, the end families in each, and what happens when they are swapped.
4 min read
Thread & fitting identification
Hydraulic fittings and adapters: the complete guide to thread families, seats and seals
BSP, JIC, ORFS, NPT, NPSM, SAE flare, O-ring boss, metric 24° cone, Japanese 30° and SAE flanges: how each family seals, how to tell them apart, and which standard each one is made to.
6 min read
Engineers viewing this also looked at
SAE Code 61 Flange Head 45° Elbow Crimp Fitting for Braided Hose
SAE Code 61 Flange Head 90° Elbow Crimp Fitting for Braided Hose
SAE Code 62 Flange Head Crimp Fitting for Braided Hose
SAE Code 62 Flange Head 45° Elbow Crimp Fitting for Braided Hose
SAE Code 62 Flange Head 90° Elbow Crimp Fitting for Braided Hose
DIN Heavy Metric 24° Female Swivel Crimp Fitting for Braided Hose
DIN Heavy Metric 24° Female Swivel 45° Elbow Crimp Fitting for Braided Hose
