DIN Heavy Metric 24° Female Swivel 45° Elbow Crimp Fitting for Braided Hose
DIN Heavy Metric 24° Female Swivel 45° Elbow crimp hose fitting for braided hydraulic hose (1SN · 2SN · R1AT · R2AT · R16 · R17). Indus-branded equivalent of the Parker 10C43 series, in 10 sizes from -06.
Key features
- Fitting Configuration: 45-elbow
- Thread Form: Metric parallel thread
- Sealing Form: 24° cone with O-ring
- Nominal Size Range: -06 to -24
- Fitting Configuration
- 45-elbow
- Thread Form
- Metric parallel thread
- Sealing Form
- 24° cone with O-ring
- Nominal Size Range
- -06 to -24
Product description
The DIN Heavy Metric 24° Female Swivel 45° Elbow Crimp Fitting for Braided Hose is a one-piece crimp hose fitting for braided hydraulic hose — EN 853 1SN and 2SN, and SAE 100R1AT, 100R2AT, 100R16 and 100R17. It is supplied under the Indus Hydraulics brand and is dimensionally interchangeable with the Parker 10C43 series.
Construction
- Configuration: 45 elbow
- Thread form: Metric parallel thread
- Sealing form: 24° cone with O-ring
- Gender: female-swivel
- Material: carbon steel, zinc-plated and Cr3+ passivated (316 stainless on request)
Hose compatibility
Crimps onto EN 853 1SN and 2SN, and SAE 100R1AT, 100R2AT, 100R16 and 100R17. Pair it with the matching Indus crimp ferrule for the hose grade — the ferrule, not the fitting, is what changes between hose constructions. The assembly's pressure rating is set by the hose grade and bore, not by this fitting.
Parker equivalence
This listing replaces the Parker 10C43 series. Individual sizes are listed below with our part number alongside the Parker number they replace, so you can order from an existing bill of materials without re-specifying.
Sizes
10 sizes, hose bore -06 to -24. Full size and dimension table on this page.
How to order
Quote the Indus part number for the size you need, or send us the Parker number and we will cross it. Tell us the hose grade and bore and we will include the matching ferrule. Indus crimps and pressure-tests assemblies before dispatch — send the overall length and both end fittings on the RFQ.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | 45-elbow |
| Thread Form | Metric parallel thread |
| Sealing Form | 24° cone with O-ring |
| Thread Gender | female-swivel |
| Series | heavy-series |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | -06 to -24 |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (316 stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | DIN 2353 (S), ISO 12151-2 |
Compatibility
| Parameter | Value |
|---|---|
| Hose Compatibility | EN 853 1SN and 2SN, and SAE 100R1AT, 100R2AT, 100R16 and 100R17 |
| Parker Series Equivalent | 10C43 |
Shipping & lead time
Sizes & part numbers
10 sizesReplaces the Parker 10C43 series. Quote the Indus part number, or send us the Parker number and we will cross it.
| Indus part no. | Hose bore | Thread | Tube O.D. (mm) | W (mm) | A (mm) | B (mm) | E (mm) |
|---|---|---|---|---|---|---|---|
| IH-CF43-DINHF-45-0618 | -06 · 3/8" · DN10 | M18X1.5 | 10 | 22 | 75 | 48 | 23 |
| IH-CF43-DINHF-45-0620 | -06 · 3/8" · DN10 | M20X1.5 | 12 | 24 | 75 | 48 | 23 |
| IH-CF43-DINHF-45-0622 | -06 · 3/8" · DN10 | M22X1.5 | 14 | 27 | 75 | 48 | 23 |
| IH-CF43-DINHF-45-1030 | -10 · 5/8" · DN16 | M30X2.0 | 20 | 36 | 100 | 61 | 28 |
| IH-CF43-DINHF-45-1230 | -12 · 3/4" · DN20 | M30X2.0 | 20 | 36 | 123 | 83 | 36 |
| IH-CF43-DINHF-45-1236 | -12 · 3/4" · DN20 | M36X2.0 | 25 | 46 | 124 | 84 | 37 |
| IH-CF43-DINHF-45-1636 | -16 · 1" · DN25 | M36X2.0 | 25 | 46 | 130 | 85 | 38 |
| IH-CF43-DINHF-45-1642 | -16 · 1" · DN25 | M42X2.0 | 30 | 50 | 130 | 85 | 38 |
| IH-CF43-DINHF-45-2052 | -20 · 1.1/4" · DN32 | M52X2.0 | 38 | 60 | 158 | 111 | 48 |
| IH-CF43-DINHF-45-2452 | -24 · 1.1/2" · DN40 | M52X2.0 | 38 | 60 | 179 | 119 | 62 |
Tube O.D. — Outside diameter of the tube the port is cut for. W — Nut / hex across flats — the spanner size. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
Indus Hydraulics is not affiliated with Parker. Parker part numbers are shown for cross-reference only, so you can order from an existing bill of materials.
The following competitor part numbers are compatible with or superseded by this SKU. Click through to the dedicated replacement page for each.
Which Parker part number does this replace?▾
Which hoses does this fitting crimp onto?▾
What sizes are available?▾
What is the sealing form?▾
What is the maximum working pressure?▾
Which ferrule pairs with this fitting?▾
Is stainless steel available?▾
Can Indus crimp the assembly?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- DKO 45° Bogen metrisch Innengewinde mit O-Ring 24° Konus Pressarmatur
- fr
- femelle coude 45° métrique cône 24° avec joint torique embout à sertir
- es
- hembra métrica codo 45° con junta tórica cono 24° racor de prensar
- it
- femmina gomito 45° metrica cono 24° DKO con O-ring raccordo a pressare
From the blog
Written about this range
Assembly, crimping & certification
Braided against spiral hose fittings: why the same thread comes in two crimp series
A JIC female swivel for 2SN and a JIC female swivel for 4SP look alike and are different parts. Which hoses each series fits, the end families in each, and what happens when they are swapped.
4 min read
Assembly, crimping & certification
Hydraulic hose assembly: specifying, cutting, crimping, testing and tagging
A hose assembly is a manufactured part, not a length of hose with ends on. The steps that make one right — from the specification to the crimp diameter, the proof test and the tag — and the mistakes that make one wrong.
6 min read
Thread & fitting identification
Hydraulic fittings and adapters: the complete guide to thread families, seats and seals
BSP, JIC, ORFS, NPT, NPSM, SAE flare, O-ring boss, metric 24° cone, Japanese 30° and SAE flanges: how each family seals, how to tell them apart, and which standard each one is made to.
6 min read
Engineers viewing this also looked at
DIN Heavy Metric 24° Female Swivel 90° Elbow Crimp Fitting for Braided Hose
DIN Heavy Metric 24° Cone Male Crimp Fitting for Braided Hose
DIN Light Metric 24° Female Swivel Crimp Fitting for Braided Hose
DIN Light Metric 24° Female Swivel 45° Elbow Crimp Fitting for Braided Hose
DIN Light Metric 24° Female Swivel 90° Elbow Crimp Fitting for Braided Hose
DIN Light Metric 24° Cone Male Crimp Fitting for Braided Hose
JIC 37° Female Swivel Crimp Fitting for Braided Hose
