Parker 471TC Series Medium Pressure Rubber Tough Cover Hydraulic Hoses

Parker 471TC Series Medium Pressure Rubber Tough Cover Hydraulic Hoses, 1/4" to 1": 15 part numbers.
Product description
Parker 471TC Series Medium Pressure Rubber Tough Cover Hydraulic Hoses, 1/4" to 1": 15 part numbers.
Specification
- Type: Hydraulic Hose
- Material: Rubber, Synthetic Rubber Inner Tube Synthetic Rubber Abrasion-Resistant (MHSA Accept)
- Size range: 1/4" to 1"
- Pressure stated by the maker: 2,500 to 5,800 psi (172 to 400 bar), by size
- Part numbers: 15
Sizes and part numbers
The Sizes & Part Numbers tab lists every Parker part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the hose
Select hose on working pressure, bore, temperature and fluid. The working pressure in the size table is the maximum for continuous duty; burst pressure is a test figure, not a working limit. End fittings must be from the series the hose maker approves for that hose.
How to order
Quote the Parker part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Application | Hydraulic |
| Distinct Properties | Tough Cover |
| Division | Hose Products |
| Group | Fluid Connector |
| Inch - Metric | Inch |
| Series | 471TC Series |
Shipping & lead time
Sizes & part numbers
15 sizes- Parker Hannifin part no.471TC-10
- Description
- Medium Pressure Cover Hydraulic Hose, Rubber, Tough
- Hose bore
- —
- Min bend radius (mm)
- —
- Working pressure (bar)
- 250
- Parker Hannifin part no.471TC-12
- Description
- Medium Pressure Cover Hydraulic Hose, Rubber, Tough
- Hose bore
- —
- Min bend radius (mm)
- —
- Working pressure (bar)
- 215
- Parker Hannifin part no.471TC-16
- Description
- Medium Pressure Cover Hydraulic Hose, Rubber, Tough
- Hose bore
- —
- Min bend radius (mm)
- —
- Working pressure (bar)
- 172
- Parker Hannifin part no.471TC-4
- Description
- Medium Pressure Cover Hydraulic Hose, Rubber, Tough
- Hose bore
- —
- Min bend radius (mm)
- —
- Working pressure (bar)
- 400
- Parker Hannifin part no.471TC-6
- Description
- Medium Pressure Cover Hydraulic Hose, Rubber, Tough
- Hose bore
- —
- Min bend radius (mm)
- —
- Working pressure (bar)
- 345
- Parker Hannifin part no.471TC-6-6
- Description
- Medium Pressure Cover Hydraulic Hose, Rubber, Tough
- Hose bore
- —
- Min bend radius (mm)
- —
- Working pressure (bar)
- —
- Parker Hannifin part no.471TC-8
- Description
- Medium Pressure Cover Hydraulic Hose, Rubber, Tough
- Hose bore
- —
- Min bend radius (mm)
- —
- Working pressure (bar)
- 293
- Parker Hannifin part no.471TC-8-8
- Description
- Medium Pressure Cover Hydraulic Hose, Rubber, Tough
- Hose bore
- —
- Min bend radius (mm)
- —
- Working pressure (bar)
- —
Show all 15 sizesShow fewer sizes
- Parker Hannifin part no.471TC-8-8-BX
- Description
- Medium Pressure Cover Hydraulic Hose, Rubber, Tough
- Hose bore
- —
- Min bend radius (mm)
- —
- Working pressure (bar)
- 293
- Parker Hannifin part no.471TC-16-BX
- Description
- Hydraulic Hose, 2, 500 PSI, 1 Inch Size Hose Inside Dia
- Hose bore
- -16 · 1"
- Min bend radius (mm)
- 152.4
- Working pressure (bar)
- 172
- Parker Hannifin part no.471TC-8-BX
- Description
- Hydraulic Hose, 4, 250 PSI, 1/2 Inch Size Hose ID, 1 1/32 Inch Size Hose OD
- Hose bore
- -08 · 1/2"
- Min bend radius (mm)
- 88.9
- Working pressure (bar)
- 293
- Parker Hannifin part no.471TC-4-BX
- Description
- Hydraulic Hose, 5, 800 PSI, 1/4 Inch Size Hose ID, 1 1/32 Inch Size Hose OD
- Hose bore
- -04 · 1/4"
- Min bend radius (mm)
- 50.8
- Working pressure (bar)
- 400
- Parker Hannifin part no.471TC-12-BX
- Description
- Hydraulic Hose, 3, 125 PSI, 3/4 Inch Size Hose ID, 1 1/32 Inch Size Hose OD
- Hose bore
- -12 · 3/4"
- Min bend radius (mm)
- 120.6
- Working pressure (bar)
- 215
- Parker Hannifin part no.471TC-6-BX
- Description
- Hydraulic Hose, 5000 PSI, 3/8 Inch Size Hose ID, 1 1/32 Inch Size Hose OD
- Hose bore
- -06 · 3/8"
- Min bend radius (mm)
- 63.5
- Working pressure (bar)
- 345
- Parker Hannifin part no.471TC-10-BX
- Description
- Hydraulic Hose, 3, 625 PSI, 5/8 Inch Size Hose ID, 1 1/32 Inch Size Hose OD
- Hose bore
- -10 · 5/8"
- Min bend radius (mm)
- 101.6
- Working pressure (bar)
- 250
Description — What this part number is, as the manufacturer lists it. Min bend radius — Tightest centreline radius the hose may be bent to at full working pressure.
Working pressure is the published rating for the hose itself. A made-up assembly is limited by its lowest-rated part, so check it against the coupling, the clamp or ferrule, and the temperature you are running at.
Cut lengths and made-up assemblies are prepared in Dubai. Tell us the bore, the length and the ends you need.
What is the Parker 471TC Series Medium Pressure Rubber Tough Cover Hydraulic Hoses used for?▾
Which sizes does the Parker 471TC Series Medium Pressure Rubber Tough Cover Hydraulic Hoses come in?▾
What does part number 471TC-8-8 of the Parker 471TC Series Medium Pressure Rubber Tough Cover Hydraulic Hoses cover?▾
What is the working pressure of the Parker 471TC Series Medium Pressure Rubber Tough Cover Hydraulic Hoses?▾
What temperatures and fluids suit the Parker 471TC Series Medium Pressure Rubber Tough Cover Hydraulic Hoses?▾
Which standard does the Parker 471TC Series Medium Pressure Rubber Tough Cover Hydraulic Hoses meet?▾
Which fittings and ferrules do I use on the Parker 471TC Series Medium Pressure Rubber Tough Cover Hydraulic Hoses?▾
How should I route the Parker 471TC Series Medium Pressure Rubber Tough Cover Hydraulic Hoses and what is the minimum bend radius?▾
How do I match the size of the Parker 471TC Series Medium Pressure Rubber Tough Cover Hydraulic Hoses to my old hose?▾
Parker 471TC Series or Parker 471ST Series: which should I choose?▾
Where does the Parker 471TC Series Medium Pressure Rubber Tough Cover Hydraulic Hoses come from and how is it shipped?▾
Do you stock the Parker 471TC Series Medium Pressure Rubber Tough Cover Hydraulic Hoses in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Machine down
Detaching a hose on a modern machine: guards, clips and the ones that fight back
On a machine built in the last fifteen years, getting to the hose takes longer than changing it. Most of that time is spent undoing things nobody photographed.
5 min read
Procurement & export
Bulk hose by the metre, or finished assemblies?
Buying hose on a reel and crimping your own looks cheaper and sometimes is. The decision turns on whether you can state a crimp diameter and prove you hit it.
3 min read
Failure analysis
Cover blistering and pinholes: usually permeation, not a defect
A bubble under the cover looks like a manufacturing fault and normally is not. It is gas that got through the tube and could not get out through the cover — which tells you something specific about the fluid and the duty.
4 min read







