Metric Female 74° Cone Seat Hose Fitting

The Metric Female 74° Cone Seat Hose Fitting is the female swivel — the nut turns, so the hose does not have to of the metric 74° cone range — a hydraulic hose fitting with a metric thread and a 74° included cone seat, sealing metal-to-metal against the mating cone.

What the 74° seat is

74° is the included angle — 37° per side, the same seat geometry the JIC 37° flare uses. The seat is the only thing the two share: this fitting carries a metric thread, so it will not mate with a JIC port and a JIC fitting will not mate with this one. If the port you are facing is metric and the seat is a cone rather than a flat face or an O-ring groove, measure the cone before ordering — the metric 60° cone in this same category looks near-identical and does not seal against a 74° mating half.

Construction

• Configuration: straight
• Thread form: Metric (M10×1 to M52×2)
• Sealing form: 74° included cone seat (37° per side), metal-to-metal
• Gender: female-swivel
• Material: carbon steel, zinc-plated and Cr3+ passivated (316 stainless on request)

Sizes

28 sizes, hose bore -02 to -24, threads M10×1 to M52×2. The full size and dimension table is on this page.

How to order

Quote the Indus part number for the size you need. Tell us the hose grade and bore and we will include the matching crimp ferrule — the ferrule follows the hose, not the fitting. Indus crimps and pressure-tests assemblies before dispatch.