45° Metric Female 74° Cone Seat Hose Fitting
45° Metric Female 74° Cone Seat — metric thread with a 74° included cone seat (37° per side), in 13 sizes from -04. Not interchangeable with the metric 60° cone.
Key features
- Fitting Configuration: 45-elbow
- Thread Form: Metric (M14×1.5 to M52×2)
- Sealing Form: 74° included cone seat (37° per side), metal-to-metal
- Nominal Size Range: -04 to -24
- Fitting Configuration
- 45-elbow
- Thread Form
- Metric (M14×1.5 to M52×2)
- Sealing Form
- 74° included cone seat (37° per side), metal-to-metal
- Nominal Size Range
- -04 to -24
Product description
The 45° Metric Female 74° Cone Seat Hose Fitting is the 45° elbow, for a hose that has to leave the port at an angle of the metric 74° cone range — a hydraulic hose fitting with a metric thread and a 74° included cone seat, sealing metal-to-metal against the mating cone.
What the 74° seat is
74° is the included angle — 37° per side, the same seat geometry the JIC 37° flare uses. The seat is the only thing the two share: this fitting carries a metric thread, so it will not mate with a JIC port and a JIC fitting will not mate with this one. If the port you are facing is metric and the seat is a cone rather than a flat face or an O-ring groove, measure the cone before ordering — the metric 60° cone in this same category looks near-identical and does not seal against a 74° mating half.
Construction
- Configuration: 45 elbow
- Thread form: Metric (M14×1.5 to M52×2)
- Sealing form: 74° included cone seat (37° per side), metal-to-metal
- Gender: female-swivel
- Material: carbon steel, zinc-plated and Cr3+ passivated (316 stainless on request)
Sizes
13 sizes, hose bore -04 to -24, threads M14×1.5 to M52×2. The full size and dimension table is on this page.
How to order
Quote the Indus part number for the size you need. Tell us the hose grade and bore and we will include the matching crimp ferrule — the ferrule follows the hose, not the fitting. Indus crimps and pressure-tests assemblies before dispatch.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | 45-elbow |
| Thread Form | Metric (M14×1.5 to M52×2) |
| Sealing Form | 74° included cone seat (37° per side), metal-to-metal |
| Thread Gender | female-swivel |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | -04 to -24 |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (316 stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | Metric thread to ISO 261 (coarse and fine pitch) |
