What sizes does the Metric Bite Type 45° Elbow UN/UNF Adjustable Stud End come in?

20 sizes are listed, covering -12 to -52. The Sizes & Part Numbers tab gives the thread on each end, the dimensions and the Indus part number for every one.

Is it available in stainless steel?

Yes. Every size is available in 316 stainless steel on request — add "-SS" to the part number when you enquire. Lead time is longer than for the zinc-plated carbon-steel stock.

Can I get it faster than the quoted lead time?

Tell us it is a plant-down job when you enquire. Common sizes are held in Jebel Ali and go out the same day if you order before 14:00 GST.

What thread family does this adapter use?

DIN 2353 bite-type. ISO 6149. The seat is metric O-ring stud end. Check the thread on each end against the size table before ordering.

What are the port specs?

Port A: UN/UNF Thread Adjustable Stud Ends with O-Ring Sealing. Port A: Metric M12×1.5 to M42×2. Port B: UN/UNF 7/16-20 to 1.7/8-12.

What sizes are available?

20 sizes are listed, covering -12 to -52. The Sizes & Part Numbers tab gives the thread on each end, the dimensions and the Indus part number for every one. Sizes outside the table are quoted on request.

What is the maximum working pressure?

The manufacturer publishes no pressure rating for this family, so this page does not state one. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.

What materials and finishes are available?

Standard: carbon steel with a zinc-plated, Cr3+ passivated, RoHS-compliant finish. 316 stainless steel is available on request for marine, chemical or food-grade service — add "-SS" to the part number when you enquire.

Is this adapter interchangeable with other thread families?

No. DIN 2353 bite-type is a thread family in its own right and does not interchange with BSP, JIC, NPT, metric or ORFS. Where you need to cross between families, use the adapter built for that pair rather than forcing a thread that nearly fits.

Do I need to crimp this onto a hose?

No. These are tube and port adapters, not hose ends — they thread into a port or join two threaded ends. For a hose assembly use Indus crimp ferrules with the matching Indus hose-end fitting.

Common sizes are held in Jebel Ali and go out the same day if you order before 14:00 GST. Less-common combinations ship within 7 working days of RFQ confirmation; say if it is a plant-down job and we will prioritise it.

INDUS HYDRAULICSIH-AD-DIN-046

Metric Bite Type 45° Elbow UN/UNF Adjustable Stud End

Name: Metric Bite Type 45° Elbow UN/UNF Adjustable Stud End
Brand: Indus Hydraulics
SKU: IH-AD-DIN-046

DIN 2353 Bite Type AdaptersEx-stock · delivery in 3 days

VIEW 01·Metric bite-type 45° elbow with UN/UNF O-ring adjustable stud end and locknut

Metric Bite Type 45° Elbow UN/UNF Adjustable Stud End — DIN 2353 bite-type adapter, 45 elbow body, 20 orderable sizes on this page. RFQ-only; standard Indus zinc-plated carbon-steel construction.

Key features

Body Configuration: 45 elbow
Port A Thread: Metric M12×1.5 to M42×2
Port A Sealing: Metric O-ring stud end
Nominal Size Range: -12 to -52

Body Configuration: 45 elbow
Port A Thread: Metric M12×1.5 to M42×2
Port A Sealing: Metric O-ring stud end
Nominal Size Range: -12 to -52

Enquire on WhatsApp Email for a quotation

Ships in 24h

Order before 14:00 GST · Jebel Ali

24-month warranty

Manufacturer-backed · genuine parts

Engineering support

A real applications engineer

Product description

The Metric Bite Type 45° Elbow UN/UNF Adjustable Stud End is a 45 elbow hydraulic adapter in the Indus DIN 2353 bite-type range. Every size the manufacturer publishes is listed in the Sizes & Part Numbers tab, with the thread on each end, the dimensions and the part number to quote.

Construction

Body configuration: 45 elbow
Port A: UN/UNF Thread Adjustable Stud Ends with O-Ring Sealing
Material: carbon steel (stainless steel available on request)
Surface treatment: zinc-plated, Cr3+ passivated, RoHS-compliant

Threads

Port A: Metric M12×1.5 to M42×2
Port B: UN/UNF 7/16-20 to 1.7/8-12

Sealing

Metric O-ring stud end. Match the seat as well as the thread — a thread that engages against the wrong seat will weep under pressure, and several of these families share a thread while sealing differently.

Performance

The manufacturer publishes no pressure rating for this family. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.

Applicable standards

ISO 6149.

Light and heavy series

Both the light and the heavy series are listed on this page. They share a nominal size but not a tube outside diameter, so pick the row by the tube O.D. column, not by the thread alone.

How to order

Quote the Indus part number from the size table. If you have only the ports, send us the thread on each end and whether you need carbon steel or stainless, and Indus engineering will confirm the part number against your equipment.

Companion products

These are tube and port adapters, not hose ends. For hose assemblies pair them with Indus crimp ferrules and the matching hose-end fitting; for tube runs, with Indus cutting rings and end nuts.

Identification

Parameter	Value
Body Configuration	45 elbow

Port A

Parameter	Value
Port A Thread	Metric M12×1.5 to M42×2
Port A Sealing	Metric O-ring stud end

Port B

Parameter	Value
Port B Thread	UN/UNF 7/16-20 to 1.7/8-12
Port B Sealing	Metric O-ring stud end

Dimensions

Parameter	Value
Nominal Size Range	-12 to -52

Construction

Parameter	Value
Material	Carbon steel (stainless on request)
Surface Treatment	Zinc-plated, Cr3+ passivated, RoHS-compliant

Compliance

Parameter	Value
Applicable Standards	ISO 6149

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Sizes & part numbers

20 sizes

Indus part no.	End 1	End 2	S1 (mm)	S2 (mm)	S3 (mm)	D1 (mm)	L1 (mm)	L2 (mm)	L3 (mm)	L4 (mm)
IH-AD-DIN-046-C1204OG	M12X1.5	7/16"X20	14	14	14	6	9	16	29	24
IH-AD-DIN-046-C1406OG	M14X1.5	9/16"X18	14	14	17	8	12	19	29	27
IH-AD-DIN-046-C1606OG	M16X1.5	9/16"X18	19	17	19	10	12	19	34	27
IH-AD-DIN-046-C1808OG	M18X1.5	3/4"X16	19	22	22	12	14	21	37	28
IH-AD-DIN-046-C2210OG	M22X1.5	7/8"X14	22	27	27	15	17	24	39	32
IH-AD-DIN-046-C2208OG	M22X1.5	3/4"X16	22	22	27	15	17	24	37	32
IH-AD-DIN-046-C2612OG	M26X1.5	1.1/16"X12	30	32	32	18	17	24.5	47	33
IH-AD-DIN-046-C3012OG	M30X2	1.1/16"X12	30	32	36	22	19	26.5	50	35
IH-AD-DIN-046-C3616OG	M36X2	1.5/16"X12	36	41	41	28	23	30.5	52	39
IH-AD-DIN-046-C4520OG	M45X2	1.5/8"X12	50	50	50	35	27	37.5	54	48
IH-AD-DIN-046-C5224OG	M52X2	1.7/8"X12	50	55	60	42	26	37	54	49
IH-AD-DIN-046-D1404OG	M14X1.5	7/16"X20	14	14	17	6	9	16	30	24
IH-AD-DIN-046-D1606OG	M16X1.5	9/16"X18	19	17	19	8	12	19	33	27
IH-AD-DIN-046-D1806OG	M18X1.5	9/16"X18	19	17	22	10	13	20.5	33	29
IH-AD-DIN-046-D2008OG	M20X1.5	3/4"X16	22	22	24	12	17	24.5	36	33
IH-AD-DIN-046-D2410OG	M24X1.5	7/8"X14	27	27	30	16	16	24.5	45	34
IH-AD-DIN-046-D3012OG	M30X2	1.1/16"X12	30	32	36	20	16	36.5	50	38
IH-AD-DIN-046-D3616OG	M36X2	1.5/16"X12	36	41	46	25	30	42	52	54
IH-AD-DIN-046-D4220OG	M42X2	1.5/8"X12	50	50	50	30	24	37.5	54	50
IH-AD-DIN-046-D5224OG	M52X2	1.7/8"X12	50	55	60	38	21	37	54	52

End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. S1 — Dimension S1 on the manufacturer dimension drawing. S2 — Dimension S2 on the manufacturer dimension drawing. S3 — Dimension S3 on the manufacturer dimension drawing. D1 — Dimension D1 on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. L2 — Dimension L2 on the manufacturer dimension drawing. L3 — Dimension L3 on the manufacturer dimension drawing. L4 — Dimension L4 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.

Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de: Adapter 45° Bogen metrisch auf UNF
fr: adaptateur coude 45° métrique sur UNF
es: adaptador codo 45° métrica a UNF
it: adattatore gomito 45° metrica a UNF

From the blog

Written about this range

Fittings by industry

Fixed plant fittings: standardise, because you finally can

A factory is the one environment where the thread population is a choice rather than an inheritance. Most plants never make that choice, and pay for it every week.

3 min read

Thread & fitting identification

Fittings on European machines: DIN 2353, and light series versus heavy

Metric 24° cone covers most of it, but the same tube size exists in two series with different threads. Knowing which one you are holding is the whole job.

3 min read

Thread & fitting identification

Fittings on a Chinese excavator: which thread families to expect

Metric 24° cone and BSP cover most of what you will meet, with flanges on the big lines. What each looks like in the hand, and why the badge on the machine never settles it.

4 min read

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at

Run tee with BSP adjustable stud end and swivel nut, DIN 2353 bite-type, zinc-plated steel

IH-AD-DIN-047

Metric Bite Type 45° Elbow UN/UNF Adjustable Stud End

Key features

Product description

Construction

Threads

Sealing

Performance

Applicable standards

Light and heavy series

How to order

Companion products

Identification

Port A

Port B

Dimensions

Construction

Compliance

Shipping & lead time

Sizes & part numbers

Written about this range

Fixed plant fittings: standardise, because you finally can

Fittings on European machines: DIN 2353, and light series versus heavy

Fittings on a Chinese excavator: which thread families to expect

Engineers viewing this also looked at

BSP Adjustable Stud End Run Tee

Metric Bite Type 90° Elbow UN/UNF Adjustable Stud End

Metric Bite Type 45° Elbow Male Adjustable Stud End

45° Elbow BSP Adjustable Stud End

Metric Bite Type 45° Elbow Reducer Tube Adaptor with Swivel Nut

Metric Bite Type Elbow Pump Flange Connection

Steel DIN 2353 Soft-Seal Tube Cap, Light Series

Steel DIN 2353 Soft-Seal Tube Cap, Heavy Series