Is it available in stainless steel?

Yes. Every size is available in 316 stainless steel on request — add "-SS" to the part number when you enquire. Lead time is longer than for the zinc-plated carbon-steel stock.

Can I get it faster than the quoted lead time?

Tell us it is a plant-down job when you enquire. Common sizes are held in Jebel Ali and go out the same day if you order before 14:00 GST.

What thread family does this adapter use?

DIN 2353 bite-type. Check the thread on each end against the size table before ordering.

What are the port specs?

Port A: Reducer Tube Adaptor with Swivel Nut. Port A: Metric M12×1.5 to M42×2. Port B: Metric M12×1.5 to M42×2.

What sizes are available?

19 sizes are listed, covering -12 to -52. The Sizes & Part Numbers tab gives the thread on each end, the dimensions and the Indus part number for every one. Sizes outside the table are quoted on request.

What is the maximum working pressure?

The manufacturer publishes no pressure rating for this family, so this page does not state one. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.

What materials and finishes are available?

Standard: carbon steel with a zinc-plated, Cr3+ passivated, RoHS-compliant finish. 316 stainless steel is available on request for marine, chemical or food-grade service — add "-SS" to the part number when you enquire.

Is this adapter interchangeable with other thread families?

No. DIN 2353 bite-type is a thread family in its own right and does not interchange with BSP, JIC, NPT, metric or ORFS. Where you need to cross between families, use the adapter built for that pair rather than forcing a thread that nearly fits.

Do I need to crimp this onto a hose?

No. These are tube and port adapters, not hose ends — they thread into a port or join two threaded ends. For a hose assembly use Indus crimp ferrules with the matching Indus hose-end fitting.

Common sizes are held in Jebel Ali and go out the same day if you order before 14:00 GST. Less-common combinations ship within 7 working days of RFQ confirmation; say if it is a plant-down job and we will prioritise it.

INDUS HYDRAULICSIH-AD-DIN-051

Metric Bite Type 45° Elbow Reducer Tube Adaptor with Swivel Nut

Name: Metric Bite Type 45° Elbow Reducer Tube Adaptor with Swivel Nut
Brand: Indus Hydraulics
SKU: IH-AD-DIN-051

DIN 2353 Bite Type AdaptersEx-stock · delivery in 3 days

VIEW 01·Metric bite-type 45° elbow reducer, swivel nut on one leg and plain tube stub on the other

Metric Bite Type 45° Elbow Reducer Tube Adaptor with Swivel Nut — DIN 2353 bite-type adapter, 45 elbow body, 19 orderable sizes on this page. RFQ-only; standard Indus zinc-plated carbon-steel construction.

Key features

Body Configuration: 45 elbow
Port A Thread: Metric M12×1.5 to M42×2
Nominal Size Range: -12 to -52

Body Configuration: 45 elbow
Port A Thread: Metric M12×1.5 to M42×2
Nominal Size Range: -12 to -52

Enquire on WhatsApp Email for a quotation

Ships in 24h

Order before 14:00 GST · Jebel Ali

24-month warranty

Manufacturer-backed · genuine parts

Engineering support

A real applications engineer

Product description

The Metric Bite Type 45° Elbow Reducer Tube Adaptor with Swivel Nut is a 45 elbow hydraulic adapter in the Indus DIN 2353 bite-type range. Every size the manufacturer publishes is listed in the Sizes & Part Numbers tab, with the thread on each end, the dimensions and the part number to quote.

Construction

Body configuration: 45 elbow
Port A: Reducer Tube Adaptor with Swivel Nut
Material: carbon steel (stainless steel available on request)
Surface treatment: zinc-plated, Cr3+ passivated, RoHS-compliant

Threads

Port A: Metric M12×1.5 to M42×2
Port B: Metric M12×1.5 to M42×2

Performance

The manufacturer publishes no pressure rating for this family. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.

Light and heavy series

Both the light and the heavy series are listed on this page. They share a nominal size but not a tube outside diameter, so pick the row by the tube O.D. column, not by the thread alone.

How to order

Quote the Indus part number from the size table. If you have only the ports, send us the thread on each end and whether you need carbon steel or stainless, and Indus engineering will confirm the part number against your equipment.

Companion products

These are tube and port adapters, not hose ends. For hose assemblies pair them with Indus crimp ferrules and the matching hose-end fitting; for tube runs, with Indus cutting rings and end nuts.

Identification

Parameter	Value
Body Configuration	45 elbow

Port A

Parameter	Value
Port A Thread	Metric M12×1.5 to M42×2

Port B

Parameter	Value
Port B Thread	Metric M12×1.5 to M42×2

Dimensions

Parameter	Value
Nominal Size Range	-12 to -52

Construction

Parameter	Value
Material	Carbon steel (stainless on request)
Surface Treatment	Zinc-plated, Cr3+ passivated, RoHS-compliant

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Sizes & part numbers

19 sizes

Indus part no.	End 1	End 2	S1 (mm)	S2 (mm)	D1 (mm)	L1 (mm)	L2 (mm)	L3 (mm)	L4 (mm)
IH-AD-DIN-051-C12W	M12X1.5	M12X1.5	14	14	6	9	16	26	24
IH-AD-DIN-051-C14W	M14X1.5	M14X1.5	14	17	8	12	19	27.5	27
IH-AD-DIN-051-C16W	M16X1.5	M16X1.5	19	19	10	12	19	29	27
IH-AD-DIN-051-C18W	M18X1.5	M18X1.5	19	22	12	14	21	29.5	29
IH-AD-DIN-051-C22W	M22X1.5	M22X1.5	22	27	15	17	24	32.5	32
IH-AD-DIN-051-C26W	M26X1.5	M26X1.5	27	32	18	16.5	24	35.5	33
IH-AD-DIN-051-C30W	M30X2	M30X2	30	36	22	18.5	26	38.5	35
IH-AD-DIN-051-C36W	M36X2	M36X2	36	41	28	23	30.5	41.5	40
IH-AD-DIN-051-C45W	M45X2	M45X2	50	50	35	26.5	37	51	48
IH-AD-DIN-051-C52W	M52X2	M52X2	50	60	42	26	37	56	49
IH-AD-DIN-051-D14W	M14X1.5	M14X1.5	14	17	6	9	16	27	24
IH-AD-DIN-051-D16W	M16X1.5	M16X1.5	19	19	8	12	19	27.5	27
IH-AD-DIN-051-D18W	M18X1.5	M18X1.5	19	22	10	13.5	21	30	30
IH-AD-DIN-051-D20W	M20X1.5	M20X1.5	22	24	12	16.5	24	31	33
IH-AD-DIN-051-D24W	M24X1.5	M24X1.5	27	30	16	15.5	24	36.5	34
IH-AD-DIN-051-D30W	M30X2	M30X2	30	36	20	16	26.5	44.5	38
IH-AD-DIN-051-D36W	M36X2	M36X2	36	46	25	18.5	30.5	50	43
IH-AD-DIN-051-D42W	M42X2	M42X2	50	50	30	23.5	37	55	50
IH-AD-DIN-051-D52W	M52X2	M52X2	50	60	38	21	37	63	52

End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. S1 — Dimension S1 on the manufacturer dimension drawing. S2 — Dimension S2 on the manufacturer dimension drawing. D1 — Dimension D1 on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. L2 — Dimension L2 on the manufacturer dimension drawing. L3 — Dimension L3 on the manufacturer dimension drawing. L4 — Dimension L4 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.

Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de: 45° Bogen metrisch Reduzierung
fr: coude 45° métrique réducteur
es: métrica codo 45° reductor
it: gomito 45° metrica riduzione

From the blog

Written about this range

Fittings by industry

Fixed plant fittings: standardise, because you finally can

A factory is the one environment where the thread population is a choice rather than an inheritance. Most plants never make that choice, and pay for it every week.

3 min read

Thread & fitting identification

Fittings on European machines: DIN 2353, and light series versus heavy

Metric 24° cone covers most of it, but the same tube size exists in two series with different threads. Knowing which one you are holding is the whole job.

3 min read

Thread & fitting identification

Fittings on a Chinese excavator: which thread families to expect

Metric 24° cone and BSP cover most of what you will meet, with flanges on the big lines. What each looks like in the hand, and why the badge on the machine never settles it.

4 min read

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at

Metric bite-type 90° elbow on a square four-bolt pump flange with studs

IH-AD-DIN-052

Metric Bite Type 45° Elbow Reducer Tube Adaptor with Swivel Nut

Key features

Product description

Construction

Threads

Performance

Light and heavy series

How to order

Companion products

Identification

Port A

Port B

Dimensions

Construction

Shipping & lead time

Sizes & part numbers

Written about this range

Fixed plant fittings: standardise, because you finally can

Fittings on European machines: DIN 2353, and light series versus heavy

Fittings on a Chinese excavator: which thread families to expect

Engineers viewing this also looked at

Metric Bite Type Elbow Pump Flange Connection

Steel DIN 2353 Soft-Seal Tube Cap, Light Series

Steel DIN 2353 Soft-Seal Tube Cap, Heavy Series

Steel DIN 2353 Female Swivel × BSPP Male Adapter, Light Series

Steel DIN 2353 Female Swivel × BSPP Male Adapter, Heavy Series

Steel DIN 2353 Female Swivel × NPT Male Adapter, Light Series

Steel DIN 2353 Female Swivel × NPT Male Adapter, Heavy Series

Steel DIN 2353 Female Swivel × Metric Male Adapter, Light Series