What sizes does the Metric Bite Type Elbow Pump Flange Connection come in?

11 sizes are listed, covering -16 to -45. The Sizes & Part Numbers tab gives the thread on each end, the dimensions and the Indus part number for every one.

Is it available in stainless steel?

Yes. Every size is available in 316 stainless steel on request — add "-SS" to the part number when you enquire. Lead time is longer than for the zinc-plated carbon-steel stock.

Can I get it faster than the quoted lead time?

Tell us it is a plant-down job when you enquire. Common sizes are held in Jebel Ali and go out the same day if you order before 14:00 GST.

What thread family does this adapter use?

DIN 2353 bite-type. ISO 6162. The seat is SAE flange face with O-ring. Check the thread on each end against the size table before ordering.

What are the port specs?

Port A: Elbow Pump Flange Connection. Port A: Metric M16×1.5 to M24×1.5. Port B: Metric M6×22/M6×35 to M6×22/M6×45.

What sizes are available?

11 sizes are listed, covering -16 to -45. The Sizes & Part Numbers tab gives the thread on each end, the dimensions and the Indus part number for every one. Sizes outside the table are quoted on request.

What is the maximum working pressure?

The manufacturer publishes no pressure rating for this family, so this page does not state one. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.

What materials and finishes are available?

Standard: carbon steel with a zinc-plated, Cr3+ passivated, RoHS-compliant finish. 316 stainless steel is available on request for marine, chemical or food-grade service — add "-SS" to the part number when you enquire.

Is this adapter interchangeable with other thread families?

No. DIN 2353 bite-type is a thread family in its own right and does not interchange with BSP, JIC, NPT, metric or ORFS. Where you need to cross between families, use the adapter built for that pair rather than forcing a thread that nearly fits.

Do I need to crimp this onto a hose?

No. These are tube and port adapters, not hose ends — they thread into a port or join two threaded ends. For a hose assembly use Indus crimp ferrules with the matching Indus hose-end fitting.

Common sizes are held in Jebel Ali and go out the same day if you order before 14:00 GST. Less-common combinations ship within 7 working days of RFQ confirmation; say if it is a plant-down job and we will prioritise it.

INDUS HYDRAULICSIH-AD-DIN-052

Metric Bite Type Elbow Pump Flange Connection

Name: Metric Bite Type Elbow Pump Flange Connection
Brand: Indus Hydraulics
SKU: IH-AD-DIN-052

DIN 2353 Bite Type AdaptersEx-stock · delivery in 3 days

VIEW 01·Metric bite-type 90° elbow on a square four-bolt pump flange with studs

Metric Bite Type Elbow Pump Flange Connection — DIN 2353 bite-type adapter, 90 elbow body, 11 orderable sizes on this page. RFQ-only; standard Indus zinc-plated carbon-steel construction.

Key features

Body Configuration: 90 elbow
Port A Thread: Metric M16×1.5 to M24×1.5
Port A Sealing: SAE flange face with O-ring
Nominal Size Range: -16 to -45

Body Configuration: 90 elbow
Port A Thread: Metric M16×1.5 to M24×1.5
Port A Sealing: SAE flange face with O-ring
Nominal Size Range: -16 to -45

Enquire on WhatsApp Email for a quotation

Ships in 24h

Order before 14:00 GST · Jebel Ali

24-month warranty

Manufacturer-backed · genuine parts

Engineering support

A real applications engineer

Product description

The Metric Bite Type Elbow Pump Flange Connection is a 90 elbow hydraulic adapter in the Indus DIN 2353 bite-type range. Every size the manufacturer publishes is listed in the Sizes & Part Numbers tab, with the thread on each end, the dimensions and the part number to quote.

Construction

Body configuration: 90 elbow
Port A: Elbow Pump Flange Connection
Material: carbon steel (stainless steel available on request)
Surface treatment: zinc-plated, Cr3+ passivated, RoHS-compliant

Threads

Port A: Metric M16×1.5 to M24×1.5
Port B: Metric M6×22/M6×35 to M6×22/M6×45

Sealing

SAE flange face with O-ring. Match the seat as well as the thread — a thread that engages against the wrong seat will weep under pressure, and several of these families share a thread while sealing differently.

Performance

The manufacturer publishes no pressure rating for this family. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.

Applicable standards

ISO 6162.

Light and heavy series

Both the light and the heavy series are listed on this page. They share a nominal size but not a tube outside diameter, so pick the row by the tube O.D. column, not by the thread alone.

How to order

Quote the Indus part number from the size table. If you have only the ports, send us the thread on each end and whether you need carbon steel or stainless, and Indus engineering will confirm the part number against your equipment.

Companion products

These are tube and port adapters, not hose ends. For hose assemblies pair them with Indus crimp ferrules and the matching hose-end fitting; for tube runs, with Indus cutting rings and end nuts.

Identification

Parameter	Value
Body Configuration	90 elbow

Port A

Parameter	Value
Port A Thread	Metric M16×1.5 to M24×1.5
Port A Sealing	SAE flange face with O-ring

Port B

Parameter	Value
Port B Thread	Metric M6×22/M6×35 to M6×22/M6×45
Port B Sealing	SAE flange face with O-ring

Dimensions

Parameter	Value
Nominal Size Range	-16 to -45

Construction

Parameter	Value
Material	Carbon steel (stainless on request)
Surface Treatment	Zinc-plated, Cr3+ passivated, RoHS-compliant

Compliance

Parameter	Value
Applicable Standards	ISO 6162

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Sizes & part numbers

11 sizes

Indus part no.	End 1	End 2	Tube O.D. (mm)	D1 (mm)	L (mm)	L1 (mm)	L2 (mm)	L3 (mm)	O-ring
IH-AD-DIN-052-C1635	M16X1.5	M6X22/M6X35	10	6.5	39	16.5	38	35	20×2.5
IH-AD-DIN-052-C1835	M18X1.5	M6X22/M6X35	12	6.5	39	16.5	38	35	20×2.5
IH-AD-DIN-052-C2235	M22X1.5	M6X22/M6X35	15	6.5	39	16.5	38	35	20×2.5
IH-AD-DIN-052-C2635	M26X1.5	M6X22/M6X40	18	6.5	39	20.5	38	35	20×2.5
IH-AD-DIN-052-C2240	M22X1.5	M6X22/M6X40	15	6.5	42	22.5	38	40	26×2.5
IH-AD-DIN-052-C3040	M30X2	M6X22	22	6.5	42	22.5	38	40	26×2.5
IH-AD-DIN-052-C3640	M36X2	M6X22/M6X50	28	6.5	42	28	40	40	26×2.5
IH-AD-DIN-052-C4540	M45X2	M6X22/M6X60	35	6.5	42	34	41	40	26×2.5
IH-AD-DIN-052-D2435	M24X1.5	M6X22/M6X40	16	6.5	39	20	38	35	20×2.5
IH-AD-DIN-052-D3035	M30X2	M6X22/M6X45	20	6.5	39	25	45	35	20×2.5
IH-AD-DIN-052-D3040	M30X2	M6X22/M6X45	20	6.5	42	22.5	40	40	26×2.5

End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. Tube O.D. — Outside diameter of the tube the port is cut for. D1 — Dimension D1 on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. L2 — Dimension L2 on the manufacturer dimension drawing. L3 — Dimension L3 on the manufacturer dimension drawing. O-ring — O-ring size supplied with the fitting, as inside diameter × section. Ask us for the dimension drawing if you need it stamped.

Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de: 90° Bogen metrisch mit O-Ring Flansch
fr: coude 90° métrique avec joint torique bride
es: métrica codo 90° con junta tórica brida
it: gomito 90° metrica con O-ring flangia

From the blog

Written about this range

Fittings by industry

Fixed plant fittings: standardise, because you finally can

A factory is the one environment where the thread population is a choice rather than an inheritance. Most plants never make that choice, and pay for it every week.

3 min read

Thread & fitting identification

Fittings on European machines: DIN 2353, and light series versus heavy

Metric 24° cone covers most of it, but the same tube size exists in two series with different threads. Knowing which one you are holding is the whole job.

3 min read

Thread & fitting identification

Fittings on a Chinese excavator: which thread families to expect

Metric 24° cone and BSP cover most of what you will meet, with flanges on the big lines. What each looks like in the hand, and why the badge on the machine never settles it.

4 min read

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at

IH-ST-5204L

Metric Bite Type Elbow Pump Flange Connection

Key features

Product description

Construction

Threads

Sealing

Performance

Applicable standards

Light and heavy series

How to order

Companion products

Identification

Port A

Port B

Dimensions

Construction

Compliance

Shipping & lead time

Sizes & part numbers

Written about this range

Fixed plant fittings: standardise, because you finally can

Fittings on European machines: DIN 2353, and light series versus heavy

Fittings on a Chinese excavator: which thread families to expect

Engineers viewing this also looked at

Steel DIN 2353 Soft-Seal Tube Cap, Light Series

Steel DIN 2353 Soft-Seal Tube Cap, Heavy Series

Steel DIN 2353 Female Swivel × BSPP Male Adapter, Light Series

Steel DIN 2353 Female Swivel × BSPP Male Adapter, Heavy Series

Steel DIN 2353 Female Swivel × NPT Male Adapter, Light Series

Steel DIN 2353 Female Swivel × NPT Male Adapter, Heavy Series

Steel DIN 2353 Female Swivel × Metric Male Adapter, Light Series

Orbital Weld Nipple