45° Elbow BSP Adjustable Stud End
45° Elbow BSP Adjustable Stud End — DIN 2353 bite-type adapter, 45 elbow body, 19 orderable sizes on this page. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: 45 elbow
- Port A Thread: Metric M12×1.5 to M42×2
- Port A Sealing: Metric O-ring stud end
- Nominal Size Range: -12 to -52
- Body Configuration
- 45 elbow
- Port A Thread
- Metric M12×1.5 to M42×2
- Port A Sealing
- Metric O-ring stud end
- Nominal Size Range
- -12 to -52
Product description
The 45° Elbow BSP Adjustable Stud End is a 45 elbow hydraulic adapter in the Indus DIN 2353 bite-type range. Every size the manufacturer publishes is listed in the Sizes & Part Numbers tab, with the thread on each end, the dimensions and the part number to quote.
Construction
- Body configuration: 45 elbow
- Port A: BSP Thread Adjustable Stud Ends with O-Ring Sealing
- Material: carbon steel (stainless steel available on request)
- Surface treatment: zinc-plated, Cr3+ passivated, RoHS-compliant
Threads
- Port A: Metric M12×1.5 to M42×2
- Port B: BSP (G) G1/8-28 to G1.1/2-11
Sealing
Metric O-ring stud end. Match the seat as well as the thread — a thread that engages against the wrong seat will weep under pressure, and several of these families share a thread while sealing differently.
Performance
The manufacturer publishes no pressure rating for this family. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.
Applicable standards
ISO 6149.
Light and heavy series
Both the light and the heavy series are listed on this page. They share a nominal size but not a tube outside diameter, so pick the row by the tube O.D. column, not by the thread alone.
How to order
Quote the Indus part number from the size table. If you have only the ports, send us the thread on each end and whether you need carbon steel or stainless, and Indus engineering will confirm the part number against your equipment.
Companion products
These are tube and port adapters, not hose ends. For hose assemblies pair them with Indus crimp ferrules and the matching hose-end fitting; for tube runs, with Indus cutting rings and end nuts.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | 45 elbow |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | Metric M12×1.5 to M42×2 |
| Port A Sealing | Metric O-ring stud end |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | BSP (G) G1/8-28 to G1.1/2-11 |
| Port B Sealing | Metric O-ring stud end |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | -12 to -52 |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 6149 |
Shipping & lead time
The same part, in the designations used across European and Gulf trade catalogues.
- de
- 45° Bogen BSP mit O-Ring
- fr
- coude 45° BSP avec joint torique
- es
- BSP codo 45° con junta tórica
- it
- gomito 45° BSP con O-ring
