Grade 100 Plate Hook
Grade 100 Plate Hook, in 6 sizes, 8 mm (5/16″) to 22 mm (7/8″), WLL 5,700 to 42,700 lbs. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Plate hook
- Pattern / standard: Grade 100
- Size range: 8 mm (5/16″) to 22 mm (7/8″)
- Working load limit: 5,700 to 42,700 lbs
- Size range
- 8 mm (5/16″) to 22 mm (7/8″)
- Working load limit
- 5,700 to 42,700 lbs
- Material
- Alloy steel
- Finish
- As supplied by the manufacturer
Product description
Wide, flat-lipped hook for lifting stacks of sheet metal, plate and boards on a chain sling. The broad lip spreads the load along the edge of the stack.
Sizes and ratings
6 sizes, 8 mm (5/16″) to 22 mm (7/8″). Working load limit 5,700 to 42,700 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in. The lettered dimensions refer to the dimension drawing in the gallery.
Choosing a size
Plate hooks work in sets on a two-, three- or four-leg sling, never singly, with the legs spread so each hook bears on the stack. Each row is the hook for one Grade 100 chain size.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Plate hook |
| Pattern / standard | Grade 100 |
| Sizes | 6 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 8 mm (5/16″) to 22 mm (7/8″) |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 5,700 to 42,700 lbs |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | As supplied by the manufacturer |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
6 sizes| Indus part no. | Size | Chain size | WLL (lbs) | h (mm) | a (mm) | b (mm) | d1 (mm) | g (mm) | s (mm) | Weight (lbs) |
|---|---|---|---|---|---|---|---|---|---|---|
| IH-LR-G10-PLH-8MM | 8 mm (5/16″) | 9/32–5/16″ | 5,700 | 18 | 131.1 | 50 | 27.9 | 55.1 | 80 | 3.31 |
| IH-LR-G10-PLH-10MM | 10 mm (3/8″) | 3/8″ | 8,800 | 20.1 | 167.9 | 70.1 | 36.1 | 65 | 100.1 | 6.17 |
| IH-LR-G10-PLH-13MM | 13 mm (1/2″) | 1/2″ | 15,000 | 25.9 | 207 | 80 | 39.9 | 89.9 | 130 | 11.69 |
| IH-LR-G10-PLH-16MM | 16 mm (5/8″) | 5/8″ | 22,600 | 33 | 261.1 | 100.1 | 50 | 110 | 160 | 12.15 |
| IH-LR-G10-PLH-20MM | 20 mm (3/4″) | 3/4″ | 35,300 | 39.9 | 302 | 119.9 | 59.9 | 130 | 184.9 | 38.59 |
| IH-LR-G10-PLH-22MM | 22 mm (7/8″) | 7/8″ | 42,700 | 50 | 363 | 140 | 74.9 | 150.1 | 220 | 67.25 |
Size — Nominal size as the manufacturer states it. Chain size — Chain the fitting is made for. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. h — Dimension h on the manufacturer dimension drawing. a — Dimension a on the manufacturer dimension drawing. b — Dimension b on the manufacturer dimension drawing. d1 — Dimension d1 on the manufacturer dimension drawing. g — Dimension g on the manufacturer dimension drawing. s — Dimension s on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the Grade 100 plate hook come in?▾
What is the working load limit?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this range
Lifting & rigging
Shortening a chain sling: clutches, cradle grab hooks and the 20% rule
Uneven loads and off-centre lifting points need legs of different lengths, and a chain sling with shorteners adjusts on the spot. But not every grab hook carries the full chain rating when it shortens a leg. Shortening clutches, cradle and conventional grab hooks, when a maker requires a 20% reduction, and what must never be used instead.
3 min read
Lifting & rigging
Chain sling codes explained: SOS, DOS, TOS, QOS and the hook letters
A chain sling code such as DOSL or QOG describes the whole assembly: how many legs, what is at the top and what is on the end. How to read the codes, which hook does what, and why a four-leg sling is rated the same as a three-leg one.
5 min read
Rigging capacity charts
Chain sling capacity chart: Grade 80 and Grade 100 WLL by legs and angle
Working load limits for Grade 80 chain slings from 4 mm to 50 mm and Grade 100 from 6 mm to 26 mm, for one, two, three and four legs at both angle bands — with the factors behind them, the choke and temperature reductions, and a worked sizing example.
8 min read
Engineers viewing this also looked at
Grade 100 Round Sling and Webbing Sling Hook
Grade 100 Shortening Clevis Link
Grade 100 Clevis Self Locking Safety Hook
Grade 100 Eye Self Locking Safety Hook
Grade 100 Swivel Self Locking Hook
Grade 100 Swivel Self Locking Hook with Grip Latch — LBK Type
Grade 100 Twist Lock Cradle Grab Hook
