Grade 100 Eye Sling Hook with Latch — 1.4–39.3 t WLL, EN 1677

Grade 100 Eye Sling Hook with Latch (EN 1677), in 9 sizes, WLL 1.4 to 39.3 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade 100 Eye Sling Hook with Latch
- Pattern / standard: EN 1677
- Working load limit: 1.4 to 39.3 t
- Working load limit
- 1.4 to 39.3 t
- Material
- Alloy steel
Product description
Grade 100 alloy fittings for building and repairing Grade 100 chain slings. Made to EN 1677. Alloy steel.
Sizes and ratings
9 sizes. Working load limit 1.4 to 39.3 t. Minimum breaking load 5.6 to 157.2 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Rated with a 4:1 design factor between working load limit and minimum breaking load.
Choosing a size
Match the fitting to the chain size and use Grade 100 components throughout — a single lower-grade part sets the rating of the whole sling. Select on WLL for the sling configuration.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 100 Eye Sling Hook with Latch |
| Pattern / standard | EN 1677 |
| Sizes | 9 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1.4 to 39.3 t |
| Minimum breaking load | 5.6 to 157.2 t |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
9 sizes- Indus part no.IH-LR-G10-ESHL-6MM
- Size
- 6 mm
- WLL (t)
- 1.4
- Min breaking load (t)
- 5.6
- D (mm)
- 10
- E (mm)
- 18.5
- H (mm)
- 21
- L (mm)
- 111
- M (mm)
- 20.5
- Weight (kg)
- 0.32
- Indus part no.IH-LR-G10-ESHL-8MM
- Size
- 8 mm
- WLL (t)
- 2.5
- Min breaking load (t)
- 10
- D (mm)
- 11
- E (mm)
- 25
- H (mm)
- 27.5
- L (mm)
- 137.5
- M (mm)
- 25
- Weight (kg)
- 0.6
- Indus part no.IH-LR-G10-ESHL-10MM
- Size
- 10 mm
- WLL (t)
- 4
- Min breaking load (t)
- 16
- D (mm)
- 16
- E (mm)
- 28
- H (mm)
- 33
- L (mm)
- 171.5
- M (mm)
- 34
- Weight (kg)
- 1.2
- Indus part no.IH-LR-G10-ESHL-13MM
- Size
- 13 mm
- WLL (t)
- 6.7
- Min breaking load (t)
- 26.8
- D (mm)
- 19
- E (mm)
- 38
- H (mm)
- 43.5
- L (mm)
- 219
- M (mm)
- 43
- Weight (kg)
- 2.2
- Indus part no.IH-LR-G10-ESHL-16MM
- Size
- 16 mm
- WLL (t)
- 10
- Min breaking load (t)
- 40
- D (mm)
- 24.5
- E (mm)
- 44
- H (mm)
- 50
- L (mm)
- 260
- M (mm)
- 50
- Weight (kg)
- 3.5
- Indus part no.IH-LR-G10-ESHL-20MM
- Size
- 20 mm
- WLL (t)
- 16
- Min breaking load (t)
- 64
- D (mm)
- 27
- E (mm)
- 52
- H (mm)
- 56
- L (mm)
- 298
- M (mm)
- 55
- Weight (kg)
- 7.15
- Indus part no.IH-LR-G10-ESHL-22MM
- Size
- 22 mm
- WLL (t)
- 19
- Min breaking load (t)
- 76
- D (mm)
- 29
- E (mm)
- 66
- H (mm)
- 62
- L (mm)
- 330
- M (mm)
- 60
- Weight (kg)
- 11.5
- Indus part no.IH-LR-G10-ESHL-26MM
- Size
- 26 mm
- WLL (t)
- 26.5
- Min breaking load (t)
- 106
- D (mm)
- 35
- E (mm)
- 73
- H (mm)
- 75
- L (mm)
- 376
- M (mm)
- 70
- Weight (kg)
- 12.2
Show all 9 sizesShow fewer sizes
- Indus part no.IH-LR-G10-ESHL-39P3T
- Size
- 39.3 t
- WLL (t)
- 39.3
- Min breaking load (t)
- 157.2
- D (mm)
- 39
- E (mm)
- 87
- H (mm)
- 89
- L (mm)
- 458
- M (mm)
- 81.5
- Weight (kg)
- 17.5
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. M — Dimension M on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Grade 100 Eye Sling Hook with Latch and what is it used for?▾
How are the Indus part numbers for the Grade 100 Eye Sling Hook with Latch structured?▾
What sizes does the Grade 100 Eye Sling Hook with Latch come in?▾
How do I choose the right size of Grade 100 Eye Sling Hook with Latch?▾
What is the working load limit of the Grade 100 Eye Sling Hook with Latch?▾
What is the Grade 100 Eye Sling Hook with Latch made from?▾
Does the Grade 100 Eye Sling Hook with Latch come with a test certificate?▾
What should the Grade 100 Eye Sling Hook with Latch be used with?▾
How should the Grade 100 Eye Sling Hook with Latch be inspected and used safely?▾
Where is the Grade 100 Eye Sling Hook with Latch typically used?▾
How does the Grade 100 Eye Sling Hook with Latch differ from the Grade 100 Eye Sling Hook with Forged Latch — French Type?▾
Do you stock the Grade 100 Eye Sling Hook with Latch in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








