Grade 100 Master Link Forged Alloy — 1.4–81.5 t WLL

Grade 100 Master Link Forged Alloy, in 12 sizes, WLL 1.4 to 81.5 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade 100 Master Link Forged Alloy
- Working load limit: 1.4 to 81.5 t
- Working load limit
- 1.4 to 81.5 t
- Material
- Forged alloy steel
- Finish
- Powder coated
Product description
Grade 100 alloy fittings for building and repairing Grade 100 chain slings. Forged alloy steel, powder coated.
Sizes and ratings
12 sizes. Working load limit 1.4 to 81.5 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Rated with a 4:1 design factor between working load limit and minimum breaking load.
Choosing a size
Match the fitting to the chain size and use Grade 100 components throughout — a single lower-grade part sets the rating of the whole sling. Select on WLL for the sling configuration.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 100 Master Link Forged Alloy |
| Sizes | 12 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1.4 to 81.5 t |
Construction
| Parameter | Value |
|---|---|
| Material | Forged alloy steel |
| Finish | Powder coated |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
12 sizes- Indus part no.IH-LR-G10-MLFA-6MM
- Size
- 6 mm
- Chain size
- 5
- WLL (t)
- 1.4
- A (mm)
- 80
- B (mm)
- 50
- D (mm)
- 10
- Weight (kg)
- 0.14
- Section
- 一
- Indus part no.IH-LR-G10-MLFA-6-7MM6MM
- Size
- 6–7 mm (1-leg) / 6 mm (2-leg)
- Chain size
- 6-7 / 6
- WLL (t)
- 2.3
- A (mm)
- 110
- B (mm)
- 60
- D (mm)
- 13
- Weight (kg)
- 0.34
- Section
- 7+0.3×25
- Indus part no.IH-LR-G10-MLFA-8MM7MM
- Size
- 8 mm (1-leg) / 7 mm (2-leg)
- Chain size
- 8 / 7
- WLL (t)
- 3.5
- A (mm)
- 110
- B (mm)
- 60
- D (mm)
- 16
- Weight (kg)
- 0.53
- Section
- 7+0.5×25
- Indus part no.IH-LR-G10-MLFA-10MM8MM
- Size
- 10 mm (1-leg) / 8 mm (2-leg)
- Chain size
- 10 / 8
- WLL (t)
- 5
- A (mm)
- 135
- B (mm)
- 75
- D (mm)
- 18
- Weight (kg)
- 0.86
- Section
- 8+0.5×28
- Indus part no.IH-LR-G10-MLFA-13MM10MM
- Size
- 13 mm (1-leg) / 10 mm (2-leg)
- Chain size
- 13 / 10
- WLL (t)
- 7.6
- A (mm)
- 160
- B (mm)
- 90
- D (mm)
- 23
- Weight (kg)
- 1.6
- Section
- 11±0.5×35
- Indus part no.IH-LR-G10-MLFA-16MM
- Size
- 16 mm
- Chain size
- 16 / 13
- WLL (t)
- 10
- A (mm)
- 180
- B (mm)
- 100
- D (mm)
- 27
- Weight (kg)
- 2.46
- Section
- 13±0.5×43
- Indus part no.IH-LR-G10-MLFA-19MM16MM
- Size
- 19 mm (1-leg) / 16 mm (2-leg)
- Chain size
- 19 / 16
- WLL (t)
- 14
- A (mm)
- 200
- B (mm)
- 110
- D (mm)
- 33
- Weight (kg)
- 4.14
- Section
- 17±0.5×55
- Indus part no.IH-LR-G10-MLFA-22MM19MM
- Size
- 22 mm (1-leg) / 19 mm (2-leg)
- Chain size
- 22 / 19
- WLL (t)
- 25.1
- A (mm)
- 260
- B (mm)
- 140
- D (mm)
- 36
- Weight (kg)
- 6.22
- Section
- 19±0.5×60
Show all 12 sizesShow fewer sizes
- Indus part no.IH-LR-G10-MLFA-26MM22MM
- Size
- 26 mm (1-leg) / 22 mm (2-leg)
- Chain size
- 26 / 22
- WLL (t)
- 30.8
- A (mm)
- 340
- B (mm)
- 180
- D (mm)
- 45
- Weight (kg)
- 12.85
- Section
- 一
- Indus part no.IH-LR-G10-MLFA-32MM
- Size
- 32 mm
- Chain size
- 32 / 26
- WLL (t)
- 40
- A (mm)
- 350
- B (mm)
- 190
- D (mm)
- 50
- Weight (kg)
- 16.22
- Section
- 一
- Indus part no.IH-LR-G10-MLFA-32
- Size
- 一 / 32
- Chain size
- 一 / 32
- WLL (t)
- 60
- A (mm)
- 400
- B (mm)
- 200
- D (mm)
- 60
- Weight (kg)
- 27.01
- Section
- 一
- Indus part no.IH-LR-G10-MLFA-X
- Size
- 一
- Chain size
- 一
- WLL (t)
- 81.5
- A (mm)
- 460
- B (mm)
- 250
- D (mm)
- 70
- Weight (kg)
- 45
- Section
- 一
Size — Nominal size as the manufacturer states it. Chain size — Chain the fitting is made for. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Section — Cross-section of the link, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Grade 100 Master Link Forged Alloy and what is it used for?▾
How are the Indus part numbers for the Grade 100 Master Link Forged Alloy structured?▾
What sizes does the Grade 100 Master Link Forged Alloy come in?▾
How do I choose the right size of Grade 100 Master Link Forged Alloy?▾
What is the working load limit of the Grade 100 Master Link Forged Alloy?▾
What is the Grade 100 Master Link Forged Alloy made from?▾
Does the Grade 100 Master Link Forged Alloy come with a test certificate?▾
What should the Grade 100 Master Link Forged Alloy be used with?▾
How should the Grade 100 Master Link Forged Alloy be inspected and used safely?▾
Where is the Grade 100 Master Link Forged Alloy typically used?▾
How does the Grade 100 Master Link Forged Alloy differ from the Grade 100 Master Link Assembly?▾
Do you stock the Grade 100 Master Link Forged Alloy in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Shortening a chain sling: clutches, cradle grab hooks and the 20% rule
Uneven loads and off-centre lifting points need legs of different lengths, and a chain sling with shorteners adjusts on the spot. But not every grab hook carries the full chain rating when it shortens a leg. Shortening clutches, cradle and conventional grab hooks, when a maker requires a 20% reduction, and what must never be used instead.
3 min read
Lifting & rigging
Chain sling codes explained: SOS, DOS, TOS, QOS and the hook letters
A chain sling code such as DOSL or QOG describes the whole assembly: how many legs, what is at the top and what is on the end. How to read the codes, which hook does what, and why a four-leg sling is rated the same as a three-leg one.
5 min read
Rigging capacity charts
Chain sling capacity chart: Grade 80 and Grade 100 WLL by legs and angle
Working load limits for Grade 80 chain slings from 4 mm to 50 mm and Grade 100 from 6 mm to 26 mm, for one, two, three and four legs at both angle bands — with the factors behind them, the choke and temperature reductions, and a worked sizing example.
8 min read








