Grade 100 Cradle Eye Grab Hook
Grade 100 Cradle Eye Grab Hook (EN 1677), in 7 sizes, 6 mm to 22 mm, WLL 1.4 to 19 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade 100 Cradle Eye Grab Hook
- Pattern / standard: EN 1677
- Size range: 6 mm to 22 mm
- Working load limit: 1.4 to 19 t
- Size range
- 6 mm to 22 mm
- Working load limit
- 1.4 to 19 t
- Material
- Alloy steel
Product description
Grade 100 alloy fittings for building and repairing Grade 100 chain slings. Made to EN 1677. Alloy steel.
Sizes and ratings
7 sizes, 6 mm to 22 mm. Working load limit 1.4 to 19 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Rated with a 4:1 design factor between working load limit and minimum breaking load.
Choosing a size
Match the fitting to the chain size and use Grade 100 components throughout — a single lower-grade part sets the rating of the whole sling. Select on WLL for the sling configuration.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 100 Cradle Eye Grab Hook |
| Pattern / standard | EN 1677 |
| Sizes | 7 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 6 mm to 22 mm |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1.4 to 19 t |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
7 sizes| Indus part no. | Size | WLL (t) | B (mm) | D (mm) | E (mm) | L (mm) | M (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| IH-LR-G10-CEGH-6MM | 6 mm | 1.4 | 14.5 | 30.5 | 8 | 71 | 43.5 | 0.2 |
| IH-LR-G10-CEGH-8MM | 8 mm | 2.5 | 18 | 37 | 10.8 | 91.5 | 53 | 0.28 |
| IH-LR-G10-CEGH-10MM | 10 mm | 4 | 22.5 | 48.5 | 13.5 | 127.5 | 72 | 0.72 |
| IH-LR-G10-CEGH-13MM | 13 mm | 6.7 | 28 | 59 | 16.5 | 163 | 96 | 1.6 |
| IH-LR-G10-CEGH-16MM | 16 mm | 10 | 36 | 74 | 19.2 | 183 | 112.5 | 2.45 |
| IH-LR-G10-CEGH-20MM | 20 mm | 16 | 43.5 | 89.5 | 24 | 227 | 143 | 4.72 |
| IH-LR-G10-CEGH-22MM | 22 mm | 19 | 48.5 | 100.5 | 27 | 260.5 | 160.5 | 8.2 |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. B — Dimension B on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. M — Dimension M on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the Grade 100 cradle eye grab hook come in?▾
What is the working load limit?▾
Can I mix Grade 80 and Grade 100 components?▾
What is the difference between WLL, SWL and breaking load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Grade 100 Clevis Forest Hook
Grade 100 Clevis Grab Hook with Safety Pin
Grade 100 Clevis Pear Link
Grade 100 Chain Rope Connector
Grade 100 Clevis Shortening Clutch
Grade 100 Clevis Sling Hook with Forged Latch — EGKN Type
Grade 100 Clevis Sling Hook with Safety Latch
